--- /dev/null
+#
+# This file allows full customization of the user interface.
+#
+# The standard client looks for this file in:
+# 1. $HOME/.citadelrc
+# 2. <compiled CTDLDIR>/citadel.rc
+# 3. /etc/citadel.rc
+# 4. <current directory>/citadel.rc
+
+# Set ENCRYPT to yes to force SSL/TLS encryption when connecting to a
+# Citadel server, even if the server is on the same machine as the
+# client. Set it to no to disable SSL/TLS encryption. The default is to
+# enable encryption for remote systems and to disable encryption for
+# systems on the same machine as the client.
+encrypt=default
+
+# Set EDITOR to the name of an external editor to be used for entering
+# messages. If you want the external editor to be used by default, be sure
+# to reflect this in the command set below.
+#
+# editor=vi
+
+# If you define PRINTCMD, it will be a pipe through which messages are
+# printed when the user hits the <P>rint key after a message.
+#
+#printcmd=lpr
+
+# If you define EXPCMD, it will be a pipe through which any incoming
+# instant messages will be printed.
+#expcmd=xmessage -title "Instant message" -center -buttons OK -file -
+
+# ANSI_COLOR should be set to on/off/auto/user to control the use of
+# color on the screen. If it is set to "auto" then an autodetect will be
+# attempted. If it is set to "user" then it's a user-configurable option.
+#
+ansi_color=user
+
+# USE_BACKGROUND controls Citadel's use of the background. If it is turned
+# off, then Citadel will set the background to black. When it is turned on,
+# the background will be unchanged. This is most useful with "transparent"
+# terminals. Color must be on (see above) or this option has no effect.
+#
+use_background=off
+
+# STATUS_LINE will keep an informative status line on the top of the screen,
+# but it doesn't work on all terminals (Mac OS is particularly bad at this).
+status_line=off
+
+# PROMPT_CONTROL should be set to on/off/user to control whether the <N>ext
+# and <S>top keys are active when displaying the paginator prompt. If it
+# is set to "user" then it's a user-configurable option.
+#
+prompt_control=user
+
+# If DISPLAY_MESSAGE_NUMBERS is set to 1, then messages will be displayed
+# with their message numbers in the header. This is ugly but some
+# people seem to like it anyway...
+#
+display_message_numbers=0
+
+# The FORCE_MAIL_PROMPTS directive causes mail rooms to always display a
+# prompt after each message, even if the user has prompts turned off.
+#
+force_mail_prompts=1
+
+# USE_FLOORS determines whether the user sees floors, or a flat room space.
+# Set it to YES to always use floors, NO to never use floors, or DEFAULT
+# to use the setting in the user's configuration (which is normally the case).
+#
+use_floors=DEFAULT
+
+# BEEP should be set to 1 if you wish the terminal to beep when an express
+# message (page) comes in, otherwise set it to 0.
+#
+beep=1
+
+# ALLOW_ATTACHMENTS should be set to 1 if you wish the user to be able to
+# attach files to messages and/or save attachments to disk while reading
+# messages. (DANGER: do NOT enable this for "safe" public clients!)
+#
+allow_attachments=0
+
+# IDLE_THRESHOLD is the amount of time a user does nothing before being
+# listed as "idle" on the who list. The default is 900 seconds (15 minutes).
+#
+idle_threshold=900
+
+# If you set REMEMBER_PASSWORDS to 1, the Citadel client will offer to
+# remember your user name and password for every Citadel server you access,
+# automatically logging in with them on subsequent visits.
+# (DANGER: do NOT enable this for "safe" public clients!)
+#
+remember_passwords=0
+
+# Optionally, you can force the same username and password everywhere. This
+# obviously isn't as robust as the password manager.
+#
+#username=My User Name
+#password=mypassword
+
+# If URLCMD is defined, users can hit 'U' after reading a message which
+# contains embedded URL's, and the command will be executed. Usually this
+# will be used to remote-control a web browser. (Do not enable this command
+# for 'safe' public clients.)
+#
+# This one ought to work on any Linux that has the "Portland" API's installed.
+# If properly configured, xdg-open will open the URL in the user's preferred
+# web browser.
+#urlcmd=xdg-open "%s"
+#
+# This one works really well on a Macintosh -- it opens URL's in whatever
+# browser you have configured as the system default.
+#urlcmd=open "%s"
+
+# If OPENCMD is defined, users can hit 'O' after reading a message which
+# contains attachments, to open the attachments using that command. This
+# allows attachments to be opened directly from the Citadel client without
+# having to first save them in a file. The "allow_attachments" option (see
+# above) must be enabled in order for this to work.
+#
+# xdg-open works on most newer Linux systems
+opencmd=xdg-open "%s"
+#
+# This probably will work on a Macintosh
+#opencmd=open "%s"
+
+# If GOTMAILCMD is defined, the specified command will be executed. This
+# might be nice for playing sounds or providing any other type of notification.
+#
+#gotmailcmd=play gotmail.wav
+
+# If IMAGECMD is defined, users can hit 'I' to view images attached to a
+# message. (Do not enable this command for public clients.)
+#
+# Possible image viewers follow
+
+# xdg-open - on Linux systems with the Portland API's installed, this ought
+# to open the image in the user's preferred viewer.
+#imagecmd=xdg-open "%s"
+#
+# Preview on Mac OS X
+#imagecmd=/Applications/Preview.app/Contents/MacOS/Preview "%s"
+
+
+# COMMAND SET CONFIGURATION
+#
+# All lines starting with "cmd=" are considered to be commands. This allows
+# mapping of keytstrokes to various functions of the client.
+#
+# Format of each line:
+# cmd_num,access,keystrokes
+#
+# Keep a copy of the original version of this file around as a reference
+# for the command numbers. They are not documented anywhere else.
+#
+# Access is: 0 (all users), 1 (aides or room aides), 2 (aides only).
+# Please be aware that it is futile to attempt to gain unauthorized access to
+# the administrative functions of the system by changing all the access levels
+# to 0. If you do this, you'll simply be able to enter a lot of commands that
+# will fail at the server ... so don't bother trying. :-)
+#
+# The actual key to be pressed should be prefaced with an & (ampersand)
+# character. Ampersands are interesting and useful characters and you should
+# use them as much as possible. Commands requiring more than one keystroke
+# should be entered as multiple fields.
+#
+# If the last keystroke string ends with a : (colon), then the command
+# will finish by allowing the user to enter a string.
+#
+# In keystroke names, the string ^r will be replaced by the name of the
+# current room. The string ^c will be replaced by a comma.
+#
+# Commands may contain no more than five keystrokes.
+#
+# Note that the following characters are illegal in commands:
+# , (comma) : (colon) ^ (caret) & (ampersand)
+#
+#
+cmd=1,0,&? (Help)
+cmd=1,0,&Help
+cmd=3,0,&Chat
+#
+# If you want to use an external editor by default, set <E>nter message
+# to command #46 (external editor) instead of #4 (built-in editor).
+cmd=4,0,&Enter message
+#
+cmd=5,0,&Goto
+cmd=6,0,&Skip ^r
+cmd=7,0,&Zap (forget) room
+cmd=8,0,&Known rooms
+cmd=9,0,&Last five msgs
+cmd=10,0,read &Forward
+cmd=11,0,read &Reverse
+cmd=12,0,read &Old
+cmd=13,0,read &New
+cmd=14,0,read &Directory
+cmd=15,0,&Terminate
+cmd=16,0,&Ungoto
+cmd=95,0,&.,&Ungoto:
+cmd=17,0,&Who is online
+cmd=47,0,&Abandon ^r^c goto...
+#cmd=90,0,&Abandon ^r^c goto:
+cmd=50,0,toggle e&Xpert mode
+cmd=49,0,read &Info file
+cmd=18,2,&! <shell>
+cmd=19,0,&.,list &Zapped rooms
+cmd=52,0,&.,&Skip ^r^c goto:
+cmd=56,0,&Page a user
+cmd=58,0,&Mail
+cmd=84,0,&Quiet mode
+#
+# We implement both <.G>oto and <J>ump commands which do the same thing, in
+# order to please a wider audience of users. Remove one if you want to.
+#
+cmd=20,0,&Jump:
+cmd=20,0,&.,&Goto:
+#
+cmd=21,0,&.,&Help:
+cmd=22,1,&.,&Aide,&Kill this room
+cmd=23,1,&.,&Aide,&Edit this room
+cmd=24,0,&.,&Aide,&Who knows room
+cmd=25,2,&.,&Aide,&User,&Edit
+cmd=96,2,&.,&Aide,&User,&Delete
+cmd=26,2,&.,&Aide,&Validate new users
+cmd=48,1,&.,&Aide,enter &Info file
+cmd=27,0,&.,&Aide,&Room,&Invite user
+cmd=28,0,&.,&Aide,&Room,&Kick out user
+cmd=51,1,&.,&Aide,&File,&Delete
+cmd=54,1,&.,&Aide,&File,&Move
+cmd=70,2,&.,&Aide,&Message edit:
+cmd=78,1,&.,&Aide,&Post
+cmd=80,2,&.,&Aide,&System configuration,&General
+cmd=82,2,&.,&Aide,&System configuration,&Internet
+cmd=88,2,&.,&Aide,&System configuration,&Network
+cmd=92,2,&.,&Aide,&System configuration,network &Filter list
+cmd=85,2,&.,&Aide,&Terminate server,&Now
+cmd=86,2,&.,&Aide,&Terminate server,&Scheduled
+cmd=87,1,&.,&Aide,mailing &List recipients
+cmd=94,1,&.,&Aide,mailing list &Digest recipients
+cmd=89,1,&.,&Aide,&Network room sharing
+
+cmd=29,0,&.,&Terminate,and &Quit
+cmd=30,0,&.,&Terminate,and &Stay online
+
+# The 'read user listing' command accepts two different formats. The one with
+# the trailing colon allows the user to enter a few characters to search for
+# users with a partial match.
+#
+#cmd=32,0,&.,&Read,&User listing
+cmd=32,0,&.,&Read,&User listing:
+
+cmd=33,0,&.,&Read,&Textfile formatted
+#
+# Command 55 allows the user to save a downloaded file directly to the
+# computer running the client software. It is appropriate for a copy of
+# this client running on the user's own computer. It is NOT appropriate for
+# public copies of the client that people will be dialing into.
+#
+#cmd=55,0,&.,&Read,&File
+#
+# Commands 34, 43, and 45 are appropriate for public copies of the client for
+# dialup use. They transfer downloaded files to a temporary file and then
+# send them along to a dialup user using the popular protocols.
+#
+# cmd=34,0,&.,&Read,file using &Xmodem
+# cmd=43,0,&.,&Read,file using &Ymodem
+# cmd=45,0,&.,&Read,file using &Zmodem
+cmd=31,0,&.,&Read,&File unformatted
+#
+cmd=13,0,&.,&Read,&New messages
+cmd=12,0,&.,&Read,&Old msgs reverse
+cmd=71,0,&.,read &Last:
+cmd=9,0,&.,&Read,&Last five msgs
+cmd=14,0,&.,&Read,&Directory
+cmd=49,0,&.,&Read,&Info file
+cmd=114,0,&.,&Read,&Configuration
+cmd=115,0,&.,&Read,&System info
+cmd=35,0,&.,&Enter,&Password
+cmd=36,0,&.,&Enter,&ASCII message
+cmd=37,0,&.,&Enter,&Configuration
+cmd=38,0,&.,&Enter,a new &Room
+cmd=39,0,&.,&Enter,&Textfile
+cmd=77,0,&.,&Enter,&Username
+# cmd=40,0,&.,&Enter,file using &Xmodem
+# cmd=42,0,&.,&Enter,file using &Ymodem
+# cmd=44,0,&.,&Enter,file using &Zmodem
+#
+# Command 57 is the local-file-upload command for users with their own
+# copy of the clientware. Commands 72-74 are for image uploads.
+#
+#cmd=57,0,&.,&Enter,&File
+#cmd=72,0,&.,&Enter,&Image,user &Picture
+#cmd=73,0,&.,&Enter,&Image,&Room banner
+#cmd=74,0,&.,&Enter,&Image,&Floor label
+#
+cmd=41,0,&.,&Enter,re&Gistration
+cmd=4,0,&.,&Enter,&Message
+cmd=127,0,&.,&Enter,remote POP&3 accounts
+cmd=128,0,&.,&Enter,&XML/RSS feed retrieval
+
+# If you have an external editor defined, it will appear on command 46.
+cmd=46,0,&.,&Enter,message with &Editor
+
+# If you have multiple editors defined, they will appear on
+# commands 46, 101, 102, 103... up to MAX_EDITORS (5 by default)
+#cmd=101,0,&.,&Enter,message with &VI
+#cmd=102,0,&.,&Enter,message with &Nano
+
+cmd=59,0,&;,&Configure floor mode
+cmd=60,0,&;,&Goto floor:
+cmd=60,0,&.,&Enter,&Floor:
+cmd=61,0,&;,&Skip to floor:
+cmd=62,0,&;,&Zap (forget) floor
+cmd=63,2,&;,&Aide,&Create floor
+cmd=64,2,&;,&Aide,&Edit this floor
+cmd=65,2,&;,&Aide,&Kill this floor
+cmd=68,0,&;,&Known rooms
+cmd=66,0,&.,&Enter,&Bio
+cmd=67,0,&.,&Read,&Bio
+
+cmd=79,0,&.,&Wholist,&Long
+cmd=75,0,&.,&Wholist,&Roomname
+cmd=76,0,&.,&Wholist,&Hostname
+cmd=91,0,&.,&Wholist,&Active
+cmd=93,0,&.,&Wholist,&Stealth mode
+
+cmd=110,0,&+Next room
+cmd=111,0,&-Previous room
+cmd=112,0,&>Next floor
+cmd=113,0,&<Previous floor
+cmd=116,0,&.,skip to &+Next room
+cmd=117,0,&.,skip to &-Previous room
+cmd=118,0,&.,skip to &>Next floor
+cmd=119,0,&.,skip to &<Previous floor
+
+cmd=120,0,&.,&Known,&Anonymous rooms
+cmd=121,0,&.,&Known,&Directory rooms
+cmd=68,0,&.,&Known,&Floors
+cmd=49,0,&.,&Known,room &Info
+cmd=122,0,&.,&Known,&Match rooms:
+cmd=123,0,&.,&Known,preferred &Only rooms
+cmd=124,0,&.,&Known,&Private rooms
+cmd=125,0,&.,&Known,&Read only rooms
+cmd=126,0,&.,&Known,&Shared rooms
+cmd=19,0,&.,&Known,&Zapped rooms
+
+#
+# Command 69 allows the user to enter a server command directly. It is
+# primarily for testing and not intended for general use. Usually there
+# is no need to enable it.
+cmd=69,0,&@Server command:
+#
+# end of command set configuration
+#
projects / citadel.git / blobdiff