4 # This file allows full customization of the user interface.
6 # The standard client looks for this file in:
8 # 2. /usr/local/lib/citadel.rc
9 # 3. <compiled BBSDIR>/citadel.rc
10 # 4. <current directory>/citadel.rc
12 # Set ENCRYPT to yes to force SSL/TLS encryption when connecting to a
13 # Citadel/UX server, even if the server is on the same machine as the
14 # client. Set it to no to disable SSL/TLS encryption. The default is to
15 # enable encryption for remote systems and to disable encryption for
16 # systems on the same machine as the client.
19 # Set FULLSCREN to yes to (attempt to) use full-screen curses mode.
20 # This mode presents a status line and a few other niceties. Some
21 # people might not like this, so you can turn it off here or with the
22 # -s command line option. The default is to use full screen if the
23 # terminal supports it.
26 # Set EDITOR to the name of an external editor to be used for entering
27 # messages. If you want the external editor to be used by default, be sure
28 # to reflect this in the command set below.
32 # If you define PRINTCMD, it will be a pipe through which messages are
33 # printed when the user hits the <P>rint key after a message.
37 # If you define EXPCMD, it will be a pipe through which any incoming
38 # express messages will be printed.
39 #expcmd=xmessage -title "Express Message" -center -buttons OK -file -
41 # If LOCAL_SCREEN_DIMENSIONS is set to 1, then the screen dimensions will
42 # be requested from the underlying operating system instead of asking the
43 # user. This works when the user has his/her own copy of the client, it
44 # works for xterms, it sometimes works for telnet sessions, but it doesn't
45 # work for dialup connections. Generally you should set this to 1 for a
46 # private copy of the client or 0 for a shared copy of the client.
48 local_screen_dimensions=1
50 # ANSI_COLOR should be set to on/off/auto/user to control the use of
51 # color on the screen. If it is set to "auto" then an autodetect will be
52 # attempted. If it is set to "user" then it's a user-configurable option.
56 # If DISPLAY_MESSAGE_NUMBERS is set to 1, then messages will be displayed
57 # with their message numbers in the header. This is ugly but some
58 # people seem to like it anyway...
60 display_message_numbers=0
62 # The FORCE_MAIL_PROMPTS directive causes mail rooms to always display a
63 # prompt after each message, even if the user has prompts turned off.
67 # USE_FLOORS determines whether the user sees floors, or a flat room space.
68 # Set it to YES to always use floors, NO to never use floors, or DEFAULT
69 # to use the setting in the user's configuration (which is normally the case).
73 # BEEP should be set to 1 if you wish the terminal to beep when an express
74 # message (page) comes in, otherwise set it to 0.
78 # ALLOW_ATTACHMENTS should be set to 1 if you wish the user to be able to
79 # attach files to messages and/or save attachments to disk while reading
80 # messages. (DANGER: do NOT enable this for "safe" public clients!)
85 # If you set REMEMBER_PASSWORDS to 1, the Citadel client will offer to
86 # remember your user name and password for every Citadel server you access,
87 # automatically logging in with them on subsequent visits.
88 # (DANGER: do NOT enable this for "safe" public clients!)
92 # Optionally, you can force the same username and password everywhere. This
93 # obviously isn't as robust as the password manager.
95 #username=My User Name
98 # If URLCMD is defined, users can hit 'U' after reading a message which
99 # contains embedded URL's, and the command will be executed. Usually this
100 # will be used to remote-control a web browser. (Do not enable this command
101 # for 'safe' public clients.)
103 #urlcmd=netscape -remote "openURL(%s)"
106 # MESSAGE READING SEMANTICS (experimental)
108 # A new set of message reading semantics is now available. If you set
109 # alternate_semantics, the following changes are made:
111 # * Messages are marked as read when you read them, rather than when you
112 # leave the room. This means read <N>ew will display a new message
113 # at most once, unless last old on new is turned on.
114 # * Reading <F>orward or <R>everse does not mark messages as read.
115 # * When you leave a room with <G>oto, <J>ump, etc., only messages that
116 # were in the room when you arrived are marked as read. The original
117 # semantics mark all messages read that were in the room at the time
118 # you leave the room. This occasionally causes messages to be "lost."
119 # * When you leave with <T>erminate, no additional messages are marked
121 # * The <S>kip and <A>bandon commands are reversed.
123 # This set of semantics should make Citadel easier to use on very busy
124 # systems, where many messages may be posted while reading. Users
125 # accustomed to D.O.C. or its variants will want to set this option.
127 alternate_semantics=yes
130 # COMMAND SET CONFIGURATION
132 # All lines starting with "cmd=" are considered to be commands. This allows
133 # mapping of keytstrokes to various functions of the client.
135 # Format of each line:
136 # cmd_num,access,keystrokes
138 # Keep a copy of the original version of this file around as a reference
139 # for the command numbers. They are not documented anywhere else.
141 # Access is: 0 (all users), 1 (aides or room aides), 2 (aides only).
142 # Please be aware that it is futile to attempt to gain unauthorized access to
143 # the administrative functions of the system by changing all the access levels
144 # to 0. If you do this, you'll simply be able to enter a lot of commands that
145 # will fail at the server ... so don't bother trying. :-)
147 # The actual key to be pressed should be prefaced with an & (ampersand)
148 # character. Ampersands are interesting and useful characters and you should
149 # use them as much as possible. Commands requiring more than one keystroke
150 # should be entered as multiple fields.
152 # If the last keystroke string ends with a : (colon), then the command
153 # will finish by allowing the user to enter a string.
155 # In keystroke names, the string ^r will be replaced by the name of the
156 # current room. The string ^c will be replaced by a comma.
158 # Commands may contain no more than five keystrokes.
160 # Note that the following characters are illegal in commands:
161 # , (comma) : (colon) ^ (caret) & (ampersand)
169 # If you want to use an external editor by default, set <E>nter message
170 # to command #46 (external editor) instead of #4 (built-in editor).
171 cmd=4,0,&Enter message
175 cmd=7,0,&Zap (forget) room
177 cmd=9,0,&Last five msgs
178 cmd=10,0,read &Forward
179 cmd=11,0,read &Reverse
182 cmd=14,0,read &Directory
185 cmd=17,0,&Who is online
186 cmd=47,0,&Abandon ^r^c goto...
187 #cmd=90,0,&Abandon ^r^c goto:
188 cmd=50,0,toggle e&Xpert mode
189 cmd=49,0,read &Info file
191 cmd=19,0,&.,list &Zapped rooms
192 cmd=52,0,&.,&Skip ^r^c goto:
193 cmd=56,0,&Page a user
197 # We implement both <.G>oto and <J>ump commands which do the same thing, in
198 # order to please a wider audience of users. Remove one if you want to.
204 cmd=22,1,&.,&Aide,&Kill this room
205 cmd=23,1,&.,&Aide,&Edit this room
206 cmd=24,1,&.,&Aide,&Who knows room
207 cmd=25,2,&.,&Aide,edit &User
208 cmd=26,2,&.,&Aide,&Validate new users
209 cmd=48,1,&.,&Aide,enter &Info file
210 cmd=27,1,&.,&Aide,&Room,&Invite user
211 cmd=28,1,&.,&Aide,&Room,&Kick out user
212 cmd=51,1,&.,&Aide,&File,&Delete
213 cmd=53,1,&.,&Aide,&File,&Send over net
214 cmd=54,1,&.,&Aide,&File,&Move
215 cmd=70,2,&.,&Aide,&Message edit:
216 cmd=78,1,&.,&Aide,&Post
217 cmd=80,2,&.,&Aide,&System configuration,&General
218 cmd=82,2,&.,&Aide,&System configuration,&Internet
219 cmd=83,2,&.,&Aide,&System configuration,check &Message base
220 cmd=88,2,&.,&Aide,&System configuration,&Network
221 cmd=85,2,&.,&Aide,&Terminate server,&Now
222 cmd=86,2,&.,&Aide,&Terminate server,&Scheduled
223 cmd=87,1,&.,&Aide,mailing &List management
224 cmd=89,1,&.,&Aide,&Network room sharing
226 cmd=29,0,&.,&Terminate,and &Quit
227 cmd=30,0,&.,&Terminate,and &Stay online
229 # The 'read user listing' command accepts two different formats. The one with
230 # the trailing colon allows the user to enter a few characters to search for
231 # users with a partial match.
233 cmd=32,0,&.,&Read,&User listing
234 cmd=32,0,&.,&Read,&User listing:
236 cmd=33,0,&.,&Read,&Textfile formatted
238 # Command 55 allows the user to save a downloaded file directly to the
239 # computer running the client software. It is appropriate for a copy of
240 # this client running on the user's own computer. It is NOT appropriate for
241 # public copies of the client that people will be dialing into.
243 #cmd=55,0,&.,&Read,&File
245 # Commands 34, 43, and 45 are appropriate for public copies of the client for
246 # dialup use. They transfer downloaded files to a temporary file and then
247 # send them along to a dialup user using the popular protocols.
249 cmd=34,0,&.,&Read,file using &Xmodem
250 cmd=43,0,&.,&Read,file using &Ymodem
251 cmd=45,0,&.,&Read,file using &Zmodem
252 cmd=31,0,&.,&Read,&File unformatted
254 cmd=13,0,&.,&Read,&New messages
255 cmd=12,0,&.,&Read,&Old msgs reverse
256 cmd=71,0,&.,read &Last:
257 cmd=9,0,&.,&Read,&Last five msgs
258 cmd=14,0,&.,&Read,&Directory
259 cmd=49,0,&.,&Read,&Info file
260 cmd=35,0,&.,&Enter,&Password
261 cmd=36,0,&.,&Enter,&ASCII message
262 cmd=37,0,&.,&Enter,&Configuration
263 cmd=38,0,&.,&Enter,a new &Room
264 cmd=39,0,&.,&Enter,&Textfile
265 cmd=77,0,&.,&Enter,&Username
266 cmd=40,0,&.,&Enter,file using &Xmodem
267 cmd=42,0,&.,&Enter,file using &Ymodem
268 cmd=44,0,&.,&Enter,file using &Zmodem
270 # Command 57 is the local-file-upload command for users with their own
271 # copy of the clientware. Commands 72-74 are for image uploads.
273 #cmd=57,0,&.,&Enter,&File
274 #cmd=72,0,&.,&Enter,&Image,user &Picture
275 #cmd=73,0,&.,&Enter,&Image,&Room banner
276 #cmd=74,0,&.,&Enter,&Image,&Floor label
278 cmd=41,0,&.,&Enter,re&Gistration
279 cmd=4,0,&.,&Enter,&Message
280 cmd=46,0,&.,&Enter,message with &Editor
282 cmd=59,0,&;,&Configure floor mode
283 cmd=60,0,&;,&Goto floor:
284 cmd=61,0,&;,&Skip to floor:
285 cmd=62,0,&;,&Zap (forget) floor
286 cmd=63,2,&;,&Aide,&Create floor
287 cmd=64,2,&;,&Aide,&Edit floor
288 cmd=65,2,&;,&Aide,&Kill floor
289 cmd=68,0,&;,&Known rooms
290 cmd=66,0,&.,&Enter,&Bio
291 cmd=67,0,&.,&Read,&Bio
293 cmd=79,0,&.,&Wholist,&Long
294 cmd=75,0,&.,&Wholist,&Roomname
295 cmd=76,0,&.,&Wholist,&Hostname
298 # Command 69 allows the user to enter a server command directly. It is
299 # primarily for testing and not intended for general use. Usually there
300 # is no need to enable it.
301 cmd=69,0,&@Server command:
303 # end of command set configuration