* Completed 'fsck'-like reference count verifier (server and client)

[citadel.git] / citadel / citadel.rc

#
# citadel.rc
#
# This file allows full customization of the user interface.
#
# The standard client looks for this file in:
# 1. $HOME/.citadelrc
# 2. /usr/local/lib/citadel.rc
# 3. <compiled BBSDIR>/citadel.rc
# 4. <current directory>/citadel.rc

# Set EDITOR to the name of an external editor to be used for entering
# messages.  If you want the external editor to be used by default, be sure
# to reflect this in the command set below.
#
editor=vi

# If you define PRINTCMD, it will be a pipe through which messages are
# printed when the user hits the <P>rint key after a message.
#
#printcmd=lpr

# If you define EXPCMD, it will be a pipe through which any incoming
# express messages will be printed.
#expcmd=xmessage -title "Express Message" -center -buttons OK -file -

# If LOCAL_SCREEN_DIMENSIONS is set to 1, then the screen dimensions will
# be requested from the underlying operating system instead of asking the
# user.  This works when the user has his/her own copy of the client, it
# works for xterms, it sometimes works for telnet sessions, but it doesn't
# work for dialup connections.  Generally you should set this to 1 for a
# private copy of the client or 0 for a shared copy of the client.
#
local_screen_dimensions=0

# ANSI_COLOR should be set to on/off/auto/user to control the use of
# color on the screen.  If it is set to "auto" then an autodetect will be
# attempted.  If it is set to "user" then it's a user-configurable option.
#
ansi_color=user

# If DISPLAY_MESSAGE_NUMBERS is set to 1, then messages will be displayed
# with their message numbers in the header.  This is ugly but some
# people seem to like it anyway...
#
display_message_numbers=0

# The FORCE_MAIL_PROMPTS directive causes mail rooms to always display a
# prompt after each message, even if the user has prompts turned off.
#
force_mail_prompts=1

# USE_FLOORS determines whether the user sees floors, or a flat room space.
# Set it to YES to always use floors, NO to never use floors, or DEFAULT
# to use the setting in the user's configuration (which is normally the case).
#
use_floors=DEFAULT

# BEEP should be set to 1 if you wish the terminal to beep when an express
# message (page) comes in, otherwise set it to 0.
#
beep=1

# ALLOW_ATTACHMENTS should be set to 1 if you wish the user to be able to
# attach files to messages and/or save attachments to disk while reading
# messages.  (DANGER: do NOT enable this for "safe" public clients!)
#
allow_attachments=0

# If you set the USERNAME variable, the value you set here will automatically
# be passed to the "Enter your name:" prompt.
#
#username=My User Name

# If you set the PASSWORD variable, the value you set here will automatically
# be passed to all prompts which request a password ... including the prompt
# which asks for a password when creating a new user.
#
#password=mypassword

# If URLCMD is defined, users can hit 'U' after reading a message which
# contains embedded URL's, and the command will be executed.  Usually this
# will be used to remote-control a web browser.  (Do not enable this command
# for 'safe' public clients.)
#
#urlcmd=netscape -remote "openURL(%s)"


# COMMAND SET CONFIGURATION
#
# All lines starting with "cmd=" are considered to be commands.  This allows
# mapping of keytstrokes to various functions of the client.
#
# Format of each line:
# cmd_num,access,keystrokes
#
# Keep a copy of the original version of this file around as a reference
# for the command numbers.  They are not documented anywhere else.
#
# Access is:  0 (all users), 1 (aides or room aides), 2 (aides only).
# Please be aware that it is futile to attempt to gain unauthorized access to
# the administrative functions of the system by changing all the access levels
# to 0.  If you do this, you'll simply be able to enter a lot of commands that
# will fail at the server ... so don't bother trying. :-)
#
# The actual key to be pressed should be prefaced with an & (ampersand)
# character.  Ampersands are interesting and useful characters and you should
# use them as much as possible.  Commands requiring more than one keystroke
# should be entered as multiple fields.
#
# If the last keystroke string ends with a : (colon), then the command
# will finish by allowing the user to enter a string.
#
# In keystroke names, the string ^r will be replaced by the name of the
# current room.  The string ^c will be replaced by a comma.
#
# Commands may contain no more than five keystrokes.
#
# Note that the following characters are illegal in commands:
#  , (comma)    : (colon)     ^ (caret)     & (ampersand)
#
#
cmd=1,0,&? (Help)
cmd=1,0,&Help
cmd=2,0,&*Doorway
cmd=3,0,&Chat
#
# If you want to use an external editor by default, set <E>nter message
# to command #46 (external editor) instead of #4 (built-in editor).
cmd=4,0,&Enter message
#
cmd=5,0,&Goto
cmd=6,0,&Skip ^r
cmd=7,0,&Zap (forget) room
cmd=8,0,&Known rooms
cmd=9,0,&Last five msgs
cmd=10,0,read &Forward
cmd=11,0,read &Reverse
cmd=12,0,read &Old
cmd=13,0,read &New
cmd=14,0,read &Directory
cmd=15,0,&Terminate
cmd=16,0,&Ungoto
cmd=17,0,&Who is online
cmd=47,0,&Abandon ^r^c goto...
cmd=50,0,toggle e&Xpert mode
cmd=49,0,read &Info file
cmd=18,2,&! <shell>
cmd=19,0,&.,list &Zapped rooms
cmd=52,0,&.,&Skip ^r^c goto:
cmd=56,0,&Page a user
cmd=58,0,&Mail
#
# We implement both <.G>oto and <J>ump commands which do the same thing, in
# order to please a wider audience of users.  Remove one if you want to.
#
cmd=20,0,&Jump:
cmd=20,0,&.,&Goto:
#
cmd=21,0,&.,&Help:
cmd=22,1,&.,&Aide,&Kill this room
cmd=23,1,&.,&Aide,&Edit this room
cmd=24,1,&.,&Aide,&Who knows room
cmd=25,2,&.,&Aide,edit &User
cmd=26,2,&.,&Aide,&Validate new users
cmd=48,1,&.,&Aide,enter &Info file
cmd=27,1,&.,&Aide,&Room,&Invite user
cmd=28,1,&.,&Aide,&Room,&Kick out user
cmd=51,1,&.,&Aide,&File,&Delete
cmd=53,1,&.,&Aide,&File,&Send over net
cmd=54,1,&.,&Aide,&File,&Move
cmd=70,2,&.,&Aide,&Message edit:
cmd=78,1,&.,&Aide,&Post
cmd=80,2,&.,&Aide,&System configuration,&General
cmd=82,2,&.,&Aide,&System configuration,&Internet
cmd=83,2,&.,&Aide,&System configuration,check &Message base

cmd=29,0,&.,&Terminate,and &Quit
cmd=30,0,&.,&Terminate,and &Stay online
cmd=32,0,&.,&Read,&User listing
cmd=33,0,&.,&Read,&Textfile formatted
#
# Command 55 allows the user to save a downloaded file directly to the
# computer running the client software.  It is appropriate for a copy of
# this client running on the user's own computer.  It is NOT appropriate for
# public copies of the client that people will be dialing into.
#
#cmd=55,0,&.,&Read,&File
#
# Commands 34, 43, and 45 are appropriate for public copies of the client for
# dialup use.  They transfer downloaded files to a temporary file and then
# send them along to a dialup user using the popular protocols.
#
cmd=34,0,&.,&Read,file using &Xmodem
cmd=43,0,&.,&Read,file using &Ymodem
cmd=45,0,&.,&Read,file using &Zmodem
cmd=31,0,&.,&Read,&File unformatted
#
cmd=13,0,&.,&Read,&New messages
cmd=12,0,&.,&Read,&Old msgs reverse
cmd=71,0,&.,read &Last:
cmd=9,0,&.,&Read,&Last five msgs
cmd=14,0,&.,&Read,&Directory
cmd=49,0,&.,&Read,&Info file
cmd=35,0,&.,&Enter,&Password
cmd=36,0,&.,&Enter,&ASCII message
cmd=37,0,&.,&Enter,&Configuration
cmd=38,0,&.,&Enter,a new &Room
cmd=39,0,&.,&Enter,&Textfile
cmd=77,0,&.,&Enter,&Username
cmd=40,0,&.,&Enter,file using &Xmodem
cmd=42,0,&.,&Enter,file using &Ymodem
cmd=44,0,&.,&Enter,file using &Zmodem
cmd=81,0,&.,&Enter,IC&Q Configuration
#
# Command 57 is the local-file-upload command for users with their own
# copy of the clientware.  Commands 72-74 are for image uploads.
#
#cmd=57,0,&.,&Enter,&File
#cmd=72,0,&.,&Enter,&Image,user &Picture
#cmd=73,0,&.,&Enter,&Image,&Room banner
#cmd=74,0,&.,&Enter,&Image,&Floor label
#
cmd=41,0,&.,&Enter,re&Gistration
cmd=4,0,&.,&Enter,&Message
cmd=46,0,&.,&Enter,message with &Editor
#
cmd=59,0,&;,&Configure floor mode
cmd=60,0,&;,&Goto floor:
cmd=61,0,&;,&Skip to floor:
cmd=62,0,&;,&Zap (forget) floor
cmd=63,2,&;,&Aide,&Create floor
cmd=64,2,&;,&Aide,&Edit floor
cmd=65,2,&;,&Aide,&Kill floor
cmd=68,0,&;,&Known rooms
cmd=66,0,&.,&Enter,&Bio
cmd=67,0,&.,&Read,&Bio

cmd=79,0,&.,&Wholist,&Long
cmd=75,0,&.,&Wholist,&Roomname
cmd=76,0,&.,&Wholist,&Hostname

#
# Command 69 allows the user to enter a server command directly.  It is
# primarily for testing and not intended for general use.  Usually there
# is no need to enable it.
cmd=69,0,&@Server command:
#
# end of command set configuration
#