-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.9.5 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005 Free Software Foundation, Inc.
dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml])
# serial 2 IT_PROG_INTLTOOL
AC_DEFUN([IT_PROG_INTLTOOL],
-[AC_PREREQ([2.50])dnl
-
-case "$am__api_version" in
- 1.[01234])
- AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool])
- ;;
- *)
- ;;
-esac
+[
if test -n "$1"; then
AC_MSG_CHECKING(for intltool >= $1)
- INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 100 + $ 2; }'`
- INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in`
- [INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($ 2, VERSION, "."); print VERSION[1] * 100 + VERSION[2];}' ${ac_aux_dir}/intltool-update.in`
- ]
- AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found])
- test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" ||
- AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.])
+ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ printf "%d", $[1] * 100 + $[2]; }'`
+ INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { printf $[2]; }' < ${ac_aux_dir}/intltool-update.in`
+ changequote({{,}})
+ INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split(${{2}}, VERSION, "."); printf "%d\n", VERSION[1] * 100 + VERSION[2];}' < ${ac_aux_dir}/intltool-update.in`
+ changequote([,])
+
+ if test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT"; then
+ AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found])
+ else
+ AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found. Your intltool is too old. You need intltool $1 or later.])
+ exit 1
+ fi
fi
INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
- INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
AC_SUBST(INTLTOOL_DESKTOP_RULE)
AC_SUBST(INTLTOOL_DIRECTORY_RULE)
AC_SUBST(INTLTOOL_CAVES_RULE)
AC_SUBST(INTLTOOL_SCHEMAS_RULE)
AC_SUBST(INTLTOOL_THEME_RULE)
-AC_SUBST(INTLTOOL_SERVICE_RULE)
# Use the tools built into the package, not the ones that are installed.
-AC_SUBST(INTLTOOL_EXTRACT, '$(top_builddir)/intltool-extract')
-AC_SUBST(INTLTOOL_MERGE, '$(top_builddir)/intltool-merge')
-AC_SUBST(INTLTOOL_UPDATE, '$(top_builddir)/intltool-update')
+
+INTLTOOL_EXTRACT='$(top_builddir)/intltool-extract'
+INTLTOOL_MERGE='$(top_builddir)/intltool-merge'
+INTLTOOL_UPDATE='$(top_builddir)/intltool-update'
+
+AC_SUBST(INTLTOOL_EXTRACT)
+AC_SUBST(INTLTOOL_MERGE)
+AC_SUBST(INTLTOOL_UPDATE)
AC_PATH_PROG(INTLTOOL_PERL, perl)
if test -z "$INTLTOOL_PERL"; then
AC_PATH_PROG(INTLTOOL_MSGMERGE, msgmerge, msgmerge)
AC_PATH_PROG(INTLTOOL_XGETTEXT, xgettext, xgettext)
-IT_PO_SUBDIR([po])
+# Remove file type tags (using []) from po/POTFILES.
-dnl The following is very similar to
-dnl
-dnl AC_CONFIG_FILES([intltool-extract intltool-merge intltool-update])
-dnl
-dnl with the following slight differences:
-dnl - the *.in files are in ac_aux_dir,
-dnl - if the file haven't changed upon reconfigure, it's not touched,
-dnl - the evaluation of the third parameter enables a hack which computes
-dnl the actual value of $libdir,
-dnl - the user sees "executing intltool commands", instead of
-dnl "creating intltool-extract" and such.
-dnl
-dnl Nothing crucial here, and we could use AC_CONFIG_FILES, if there were
-dnl a reason for it.
+ifdef([AC_DIVERSION_ICMDS],[
+ AC_DIVERT_PUSH(AC_DIVERSION_ICMDS)
+ [mv -f po/POTFILES po/POTFILES.tmp
+ sed -e '/[[]encoding.*]/d' -e 's/[[].*] *//' < po/POTFILES.tmp > po/POTFILES
+ rm -f po/POTFILES.tmp
+ ]dnl
+ AC_DIVERT_POP()
+],[
+ ifdef([AC_CONFIG_COMMANDS_PRE],[
+ AC_CONFIG_COMMANDS_PRE([
+ [mv -f po/POTFILES po/POTFILES.tmp
+ sed -e '/[[]encoding.*]/d' -e 's/[[].*] *//' < po/POTFILES.tmp > po/POTFILES
+ rm -f po/POTFILES.tmp
+ ]dnl
+ ])
+ ])
+])
+
+# Manually sed perl in so people don't have to put the intltool scripts in AC_OUTPUT.
AC_CONFIG_COMMANDS([intltool], [
-for file in intltool-extract intltool-merge intltool-update; do
- sed -e "s|@INTLTOOL_EXTRACT@|`pwd`/intltool-extract|g" \
- -e "s|@INTLTOOL_LIBDIR@|${INTLTOOL_LIBDIR}|g" \
- -e "s|@INTLTOOL_ICONV@|${INTLTOOL_ICONV}|g" \
- -e "s|@INTLTOOL_MSGFMT@|${INTLTOOL_MSGFMT}|g" \
- -e "s|@INTLTOOL_MSGMERGE@|${INTLTOOL_MSGMERGE}|g" \
- -e "s|@INTLTOOL_XGETTEXT@|${INTLTOOL_XGETTEXT}|g" \
- -e "s|@INTLTOOL_PERL@|${INTLTOOL_PERL}|g" \
- < ${ac_aux_dir}/${file}.in > ${file}.out
- if cmp -s ${file} ${file}.out 2>/dev/null; then
- rm -f ${file}.out
- else
- mv -f ${file}.out ${file}
- fi
- chmod ugo+x ${file}
- chmod u+w ${file}
-done
+intltool_edit="-e 's#@INTLTOOL_EXTRACT@#`pwd`/intltool-extract#g' \
+ -e 's#@INTLTOOL_ICONV@#${INTLTOOL_ICONV}#g' \
+ -e 's#@INTLTOOL_MSGFMT@#${INTLTOOL_MSGFMT}#g' \
+ -e 's#@INTLTOOL_MSGMERGE@#${INTLTOOL_MSGMERGE}#g' \
+ -e 's#@INTLTOOL_XGETTEXT@#${INTLTOOL_XGETTEXT}#g' \
+ -e 's#@INTLTOOL_PERL@#${INTLTOOL_PERL}#g'"
+
+eval sed ${intltool_edit} < ${ac_aux_dir}/intltool-extract.in \
+ > intltool-extract.out
+if cmp -s intltool-extract intltool-extract.out 2>/dev/null; then
+ rm -f intltool-extract.out
+else
+ mv -f intltool-extract.out intltool-extract
+fi
+chmod ugo+x intltool-extract
+chmod u+w intltool-extract
-],
-[INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}'
-prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir"
-INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}' INTLTOOL_ICONV='${INTLTOOL_ICONV}'
-INTLTOOL_MSGFMT='${INTLTOOL_MSGFMT}' INTLTOOL_MSGMERGE='${INTLTOOL_MSGMERGE}'
-INTLTOOL_XGETTEXT='${INTLTOOL_XGETTEXT}'])
+eval sed ${intltool_edit} < ${ac_aux_dir}/intltool-merge.in \
+ > intltool-merge.out
+if cmp -s intltool-merge intltool-merge.out 2>/dev/null; then
+ rm -f intltool-merge.out
+else
+ mv -f intltool-merge.out intltool-merge
+fi
+chmod ugo+x intltool-merge
+chmod u+w intltool-merge
-])
+eval sed ${intltool_edit} < ${ac_aux_dir}/intltool-update.in \
+ > intltool-update.out
+if cmp -s intltool-update intltool-update.out 2>/dev/null; then
+ rm -f intltool-update.out
+else
+ mv -f intltool-update.out intltool-update
+fi
+chmod ugo+x intltool-update
+chmod u+w intltool-update
+], INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir=${ac_aux_dir}
+INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}' ICONV='${INTLTOOL_ICONV}'
+MSGFMT='${INTLTOOL_MSGFMT}' MSGMERGE='${INTLTOOL_MSGMERGE}'
+XGETTEXT='${INTLTOOL_XGETTEXT}')
-# IT_PO_SUBDIR(DIRNAME)
-# ---------------------
-# All po subdirs have to be declared with this macro; the subdir "po" is
-# declared by IT_PROG_INTLTOOL.
-#
-AC_DEFUN([IT_PO_SUBDIR],
-[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS.
-dnl
-dnl The following CONFIG_COMMANDS should be exetuted at the very end
-dnl of config.status.
-AC_CONFIG_COMMANDS_PRE([
- AC_CONFIG_COMMANDS([$1/stamp-it], [
- rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp"
- >"$1/stamp-it.tmp"
- [sed '/^#/d
- s/^[[].*] *//
- /^[ ]*$/d
- '"s|^| $ac_top_srcdir/|" \
- "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES"
- ]
- if test ! -f "$1/Makefile"; then
- AC_MSG_ERROR([$1/Makefile is not ready.])
- fi
- mv "$1/Makefile" "$1/Makefile.tmp"
- [sed '/^POTFILES =/,/[^\\]$/ {
- /^POTFILES =/!d
- r $1/POTFILES
- }
- ' "$1/Makefile.tmp" >"$1/Makefile"]
- rm -f "$1/Makefile.tmp"
- mv "$1/stamp-it.tmp" "$1/stamp-it"
- ])
-])dnl
])
-
# deprecated macros
-AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL])
-# A hint is needed for aclocal from Automake <= 1.9.4:
-# AC_DEFUN([AC_PROG_INTLTOOL], ...)
+AC_DEFUN([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL($@)])
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
+# serial 48 AC_PROG_LIBTOOL
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
dynamic_linker=no
;;
+kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
+
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
version_type=linux
need_lib_prefix=no
need_version=no
dynamic_linker='GNU/Linux ld.so'
;;
-netbsdelf*-gnu)
+knetbsd*-gnu)
version_type=linux
need_lib_prefix=no
need_version=no
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
+ dynamic_linker='GNU ld.so'
;;
netbsd*)
lt_cv_deplibs_check_method=pass_all
;;
-freebsd* | dragonfly*)
+freebsd* | kfreebsd*-gnu | dragonfly*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
lt_cv_deplibs_check_method=pass_all
;;
-netbsd* | netbsdelf*-gnu)
+netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
freebsd-elf*)
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
;;
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_AC_TAGVAR(ld_shlibs, $1)=yes
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
;;
esac
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
-linux* | k*bsd*-gnu)
+linux*)
if test "$host_cpu" = ia64; then
symcode='[[ABCDGIRSTW]]'
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
;;
esac
;;
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
;;
esac
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
;;
esac
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
;;
osf3* | osf4* | osf5*)
case $cc_basename in
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
- linux* | k*bsd*-gnu)
+ linux*)
case $cc_basename in
icc* | ecc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
cygwin* | mingw*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
;;
- linux* | k*bsd*-gnu)
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- ;;
*)
_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
- linux* | k*bsd*-gnu)
+ linux*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
tmp_addflag=
case $cc_basename,$host_cpu in
$echo "local: *; };" >> $output_objdir/$libname.ver~
$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
else
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
- netbsd* | netbsdelf*-gnu)
+ netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.9.6])])
+ [AM_AUTOMAKE_VERSION([1.9.5])])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
projects / citadel.git / blobdiff