4 # This file allows full customization of the user interface.
6 # The standard client looks for this file in:
8 # 2. <compiled CTDLDIR>/citadel.rc
10 # 4. <current directory>/citadel.rc
12 # Set ENCRYPT to yes to force SSL/TLS encryption when connecting to a
13 # Citadel server, even if the server is on the same machine as the
14 # client. Set it to no to disable SSL/TLS encryption. The default is to
15 # enable encryption for remote systems and to disable encryption for
16 # systems on the same machine as the client.
19 # Set FULLSCREEN to yes to (attempt to) use full-screen curses mode.
20 # This mode presents a status line and a few other niceties. Some
21 # people might not like this, so you can turn it off here or with the
22 # -s command line option. The default is to use full screen if the
23 # terminal supports it.
26 # Set EDITOR to the name of an external editor to be used for entering
27 # messages. If you want the external editor to be used by default, be sure
28 # to reflect this in the command set below.
32 # Or, you could have multiple editors available, like this:
33 # ("editor" and "editor0" are the same internally)
34 # You can go up to MAX_EDITORS number of editors (5 by default)
39 # If you define PRINTCMD, it will be a pipe through which messages are
40 # printed when the user hits the <P>rint key after a message.
44 # If you define EXPCMD, it will be a pipe through which any incoming
45 # express messages will be printed.
46 #expcmd=xmessage -title "Express Message" -center -buttons OK -file -
48 # If LOCAL_SCREEN_DIMENSIONS is set to 1, then the screen dimensions will
49 # be requested from the underlying operating system instead of asking the
50 # user. On modern networks this is almost always the case: telnet, SSH,
51 # xterm, and Unix/Linux consoles all properly report the screen dimensions.
52 # Set this option to 0 only if you are running the Citadel client on a
53 # direct-dial modem or hardwired terminals.
55 local_screen_dimensions=1
57 # ANSI_COLOR should be set to on/off/auto/user to control the use of
58 # color on the screen. If it is set to "auto" then an autodetect will be
59 # attempted. If it is set to "user" then it's a user-configurable option.
63 # USE_BACKGROUND controls Citadel's use of the background. If it is turned
64 # off, then Citadel will set the background to black. When it is turned on,
65 # the background will be unchanged. This is most useful with "transparent"
66 # terminals. Color must be on (see above) or this option has no effect.
70 # PROMPT_CONTROL should be set to on/off/user to control whether the <N>ext
71 # and <S>top keys are active when displaying the paginator prompt. If it
72 # is set to "user" then it's a user-configurable option.
76 # If DISPLAY_MESSAGE_NUMBERS is set to 1, then messages will be displayed
77 # with their message numbers in the header. This is ugly but some
78 # people seem to like it anyway...
80 display_message_numbers=0
82 # The FORCE_MAIL_PROMPTS directive causes mail rooms to always display a
83 # prompt after each message, even if the user has prompts turned off.
87 # USE_FLOORS determines whether the user sees floors, or a flat room space.
88 # Set it to YES to always use floors, NO to never use floors, or DEFAULT
89 # to use the setting in the user's configuration (which is normally the case).
93 # BEEP should be set to 1 if you wish the terminal to beep when an express
94 # message (page) comes in, otherwise set it to 0.
98 # ALLOW_ATTACHMENTS should be set to 1 if you wish the user to be able to
99 # attach files to messages and/or save attachments to disk while reading
100 # messages. (DANGER: do NOT enable this for "safe" public clients!)
104 # IDLE_THRESHOLD is the amount of time a user does nothing before being
105 # listed as "idle" on the who list. The default is 900 seconds (15 minutes).
109 # If you set REMEMBER_PASSWORDS to 1, the Citadel client will offer to
110 # remember your user name and password for every Citadel server you access,
111 # automatically logging in with them on subsequent visits.
112 # (DANGER: do NOT enable this for "safe" public clients!)
116 # Optionally, you can force the same username and password everywhere. This
117 # obviously isn't as robust as the password manager.
119 #username=My User Name
122 # If URLCMD is defined, users can hit 'U' after reading a message which
123 # contains embedded URL's, and the command will be executed. Usually this
124 # will be used to remote-control a web browser. (Do not enable this command
125 # for 'safe' public clients.)
127 # This one works on Linux and most other X11-based Unices. Specify the full
128 # path to Mozilla (or a Mozilla derivative like Netscape) if necessary.
129 #urlcmd=mozilla -remote "openURL(%s)"
131 # This one works really well on a Macintosh -- it opens URL's in whatever
132 # browser you have configured as the system default.
135 # If GOTMAILCMD is defined, the specified command will be executed. This
136 # might be nice for playing sounds or providing any other type of notification.
138 #gotmailcmd=play gotmail.wav
140 # If IMAGECMD is defined, users can hit 'I' to view images attached to a
141 # message. (Do not enable this command for public clients.)
143 # Possible image viewers follow
145 # XV - This is an oldie but goodie, shareware with source code included, no
146 # longer included with some Linux distributions due to licensing.
149 # The following 2 image viewers are included with KDE:
150 # KuickShow has a brightness/gamma option and is simple and ubobtrusive
151 #imagecmd=kuickshow "%s"
153 # KView has no brightness/gamma but can do some minimal cropping and clipboard
157 # Eye of Gnome, the Gnome/Nautilus image viewer component (bare bones
161 # GIMP is a free-software attempt at a PhotoShop-like application.
164 # Preview on Mac OS X
165 #imagecmd=/Applications/Preview.app/Contents/MacOS/Preview "%s"
167 # MESSAGE READING SEMANTICS (experimental)
169 # A new set of message reading semantics is now available. If you set
170 # alternate_semantics, the following changes are made:
172 # * Messages are marked as read when you read them, rather than when you
173 # leave the room. This means read <N>ew will display a new message
174 # at most once, unless last old on new is turned on.
175 # * Reading <F>orward or <R>everse does not mark messages as read.
176 # * When you leave a room with <G>oto, <J>ump, etc., only messages that
177 # were in the room when you arrived are marked as read. The original
178 # semantics mark all messages read that were in the room at the time
179 # you leave the room. This occasionally causes messages to be "lost."
180 # * When you leave with <T>erminate, no additional messages are marked
182 # * The <S>kip and <A>bandon commands are reversed.
184 # This set of semantics should make Citadel easier to use on very busy
185 # systems, where many messages may be posted while reading. Users
186 # accustomed to D.O.C. or its variants will want to set this option.
188 alternate_semantics=no
192 # COMMAND SET CONFIGURATION
194 # All lines starting with "cmd=" are considered to be commands. This allows
195 # mapping of keytstrokes to various functions of the client.
197 # Format of each line:
198 # cmd_num,access,keystrokes
200 # Keep a copy of the original version of this file around as a reference
201 # for the command numbers. They are not documented anywhere else.
203 # Access is: 0 (all users), 1 (aides or room aides), 2 (aides only).
204 # Please be aware that it is futile to attempt to gain unauthorized access to
205 # the administrative functions of the system by changing all the access levels
206 # to 0. If you do this, you'll simply be able to enter a lot of commands that
207 # will fail at the server ... so don't bother trying. :-)
209 # The actual key to be pressed should be prefaced with an & (ampersand)
210 # character. Ampersands are interesting and useful characters and you should
211 # use them as much as possible. Commands requiring more than one keystroke
212 # should be entered as multiple fields.
214 # If the last keystroke string ends with a : (colon), then the command
215 # will finish by allowing the user to enter a string.
217 # In keystroke names, the string ^r will be replaced by the name of the
218 # current room. The string ^c will be replaced by a comma.
220 # Commands may contain no more than five keystrokes.
222 # Note that the following characters are illegal in commands:
223 # , (comma) : (colon) ^ (caret) & (ampersand)
231 # If you want to use an external editor by default, set <E>nter message
232 # to command #46 (external editor) instead of #4 (built-in editor).
233 cmd=4,0,&Enter message
237 cmd=7,0,&Zap (forget) room
239 cmd=9,0,&Last five msgs
240 cmd=10,0,read &Forward
241 cmd=11,0,read &Reverse
244 cmd=14,0,read &Directory
248 cmd=17,0,&Who is online
249 cmd=47,0,&Abandon ^r^c goto...
250 #cmd=90,0,&Abandon ^r^c goto:
251 cmd=50,0,toggle e&Xpert mode
252 cmd=49,0,read &Info file
254 cmd=19,0,&.,list &Zapped rooms
255 cmd=52,0,&.,&Skip ^r^c goto:
256 cmd=56,0,&Page a user
260 # We implement both <.G>oto and <J>ump commands which do the same thing, in
261 # order to please a wider audience of users. Remove one if you want to.
267 cmd=22,1,&.,&Aide,&Kill this room
268 cmd=23,1,&.,&Aide,&Edit this room
269 cmd=24,0,&.,&Aide,&Who knows room
270 cmd=25,2,&.,&Aide,&User,&Edit
271 cmd=96,2,&.,&Aide,&User,&Delete
272 cmd=26,2,&.,&Aide,&Validate new users
273 cmd=48,1,&.,&Aide,enter &Info file
274 cmd=27,0,&.,&Aide,&Room,&Invite user
275 cmd=28,0,&.,&Aide,&Room,&Kick out user
276 cmd=51,1,&.,&Aide,&File,&Delete
277 cmd=53,1,&.,&Aide,&File,&Send over net
278 cmd=54,1,&.,&Aide,&File,&Move
279 cmd=70,2,&.,&Aide,&Message edit:
280 cmd=78,1,&.,&Aide,&Post
281 cmd=80,2,&.,&Aide,&System configuration,&General
282 cmd=82,2,&.,&Aide,&System configuration,&Internet
283 cmd=83,2,&.,&Aide,&System configuration,check &Message base
284 cmd=88,2,&.,&Aide,&System configuration,&Network
285 cmd=92,2,&.,&Aide,&System configuration,network &Filter list
286 cmd=85,2,&.,&Aide,&Terminate server,&Now
287 cmd=86,2,&.,&Aide,&Terminate server,&Scheduled
288 cmd=87,1,&.,&Aide,mailing &List recipients
289 cmd=94,1,&.,&Aide,mailing list &Digest recipients
290 cmd=89,1,&.,&Aide,&Network room sharing
292 cmd=29,0,&.,&Terminate,and &Quit
293 cmd=30,0,&.,&Terminate,and &Stay online
295 # The 'read user listing' command accepts two different formats. The one with
296 # the trailing colon allows the user to enter a few characters to search for
297 # users with a partial match.
299 #cmd=32,0,&.,&Read,&User listing
300 cmd=32,0,&.,&Read,&User listing:
302 cmd=33,0,&.,&Read,&Textfile formatted
304 # Command 55 allows the user to save a downloaded file directly to the
305 # computer running the client software. It is appropriate for a copy of
306 # this client running on the user's own computer. It is NOT appropriate for
307 # public copies of the client that people will be dialing into.
309 #cmd=55,0,&.,&Read,&File
311 # Commands 34, 43, and 45 are appropriate for public copies of the client for
312 # dialup use. They transfer downloaded files to a temporary file and then
313 # send them along to a dialup user using the popular protocols.
315 cmd=34,0,&.,&Read,file using &Xmodem
316 cmd=43,0,&.,&Read,file using &Ymodem
317 cmd=45,0,&.,&Read,file using &Zmodem
318 cmd=31,0,&.,&Read,&File unformatted
320 cmd=13,0,&.,&Read,&New messages
321 cmd=12,0,&.,&Read,&Old msgs reverse
322 cmd=71,0,&.,read &Last:
323 cmd=9,0,&.,&Read,&Last five msgs
324 cmd=14,0,&.,&Read,&Directory
325 cmd=49,0,&.,&Read,&Info file
326 cmd=35,0,&.,&Enter,&Password
327 cmd=36,0,&.,&Enter,&ASCII message
328 cmd=37,0,&.,&Enter,&Configuration
329 cmd=38,0,&.,&Enter,a new &Room
330 cmd=39,0,&.,&Enter,&Textfile
331 cmd=77,0,&.,&Enter,&Username
332 cmd=40,0,&.,&Enter,file using &Xmodem
333 cmd=42,0,&.,&Enter,file using &Ymodem
334 cmd=44,0,&.,&Enter,file using &Zmodem
336 # Command 57 is the local-file-upload command for users with their own
337 # copy of the clientware. Commands 72-74 are for image uploads.
339 #cmd=57,0,&.,&Enter,&File
340 #cmd=72,0,&.,&Enter,&Image,user &Picture
341 #cmd=73,0,&.,&Enter,&Image,&Room banner
342 #cmd=74,0,&.,&Enter,&Image,&Floor label
344 cmd=41,0,&.,&Enter,re&Gistration
345 cmd=4,0,&.,&Enter,&Message
347 # If you have an external editor defined, it will appear on command 46.
348 cmd=46,0,&.,&Enter,message with &Editor
350 # If you have multiple editors defined, they will appear on
351 # commands 46, 101, 102, 103... up to MAX_EDITORS (5 by default)
352 #cmd=101,0,&.,&Enter,message with &VI
353 #cmd=102,0,&.,&Enter,message with &Nano
355 cmd=59,0,&;,&Configure floor mode
356 cmd=60,0,&;,&Goto floor:
357 cmd=61,0,&;,&Skip to floor:
358 cmd=62,0,&;,&Zap (forget) floor
359 cmd=63,2,&;,&Aide,&Create floor
360 cmd=64,2,&;,&Aide,&Edit this floor
361 cmd=65,2,&;,&Aide,&Kill this floor
362 cmd=68,0,&;,&Known rooms
363 cmd=66,0,&.,&Enter,&Bio
364 cmd=67,0,&.,&Read,&Bio
366 cmd=79,0,&.,&Wholist,&Long
367 cmd=75,0,&.,&Wholist,&Roomname
368 cmd=76,0,&.,&Wholist,&Hostname
369 cmd=91,0,&.,&Wholist,&Active
370 cmd=93,0,&.,&Wholist,&Stealth mode
373 # Command 69 allows the user to enter a server command directly. It is
374 # primarily for testing and not intended for general use. Usually there
375 # is no need to enable it.
376 cmd=69,0,&@Server command:
378 # end of command set configuration