created a separate developers.txt file for developer/client ID registry

[citadel.git] / citadel / techdoc / session.txt

                  SESSION LAYER PROTOCOL FOR CITADEL/UX
         (c) 1995-1998 by Art Cancro et. al.    All Rights Reserved
   
  
 INTRODUCTION
 ------------        

 This is an attempt to document the session layer protocol used by the
Citadel/UX system, beginning with version 4.00, which is the first version
to implement a client/server paradigm.  It is intended as a resource for
programmers who intend to develop their own Citadel clients, but it may have
other uses as well.
 
 
 IMPORTANT NOTE TO DEVELOPERS!
 -----------------------------
 
 Anyone who wants to add commands or other functionality to this protocol,
*please* get in touch so that these efforts can be coordinated.  New
commands added by other developers can be added to this document, so we
don't end up with new server commands from multiple developers which have
the same name but perform different functions.  If you don't coordinate new
developments ahead of time, please at least send in an e-mail documenting
what you did, so that your new commands can be added to this document.
 
 The coordinator of the Citadel/UX project is Art Cancro <ajc@uncnsrd.mt-kisco.ny.us>.
    
  
 CONNECTING TO A SERVER
 ----------------------
  
 The protocols used below the session layer are beyond the scope of this
document, but we will briefly cover a few of the currently used methods. 
Keep in mind that the server program itself does not speak any protocols
lower than the session layer.  Instead, it reads all input from stdin, and
writes all output to stdout.  This implies that it is the responsibility of
other programs to provide a usable transport to the client programs.
 
 One way to connect to a server is to use a set of pipes.  This does of
course assume that the client and server are running on the same computer. 
When the client starts up, the first thing that it does is create two pipes,
which it temporarily dup()'s to stdin and stdout.  Then it proceeds to
fork() and exec() to a copy of the server program, which inherits the
pipes as its standard input and output - exactly the desired effect.  The
client program can then re-connect its own stdin and stdout to where they're
supposed to be, and use the pipes to send and receive server messages.
 
 Another way is to use TCP/IP.  Under Unix-like systems this is easily
accomplished using the "inetd" superserver program, which can take programs
like the Citadel/UX server and offer connections to clients over a TCP or
UDP port.  See the install documentation (or the inetd documentation from
your OS) for information on how to do this.  Always use TCP ports for
Citadel/UX sessions.  Since our session layer assumes a clean, reliable,
sequenced connection, the use of UDP would render the server unstable and
unusable.  When operating in a TCP/IP environment, the port number officially
assigned to Citadel is 504.
   
   
 GENERAL INFORMATION ABOUT THE SERVER
 ------------------------------------
  
 The server is connection-oriented and stateful: each client requires its own
connection to a server process, and when a command is sent, the client must
read the response, and then transfer data or change modes if necessary.
 
 The session layer is very much like other Internet protocols such as SMTP
or NNTP.  A client program sends one-line commands to the server, and the
server responds with a three-digit numeric result code followed by a message
describing what happened.  This cycle continues until the end of the
session.
 
 Unlike protocols such as FTP, all data transfers occur in-band.  This means
that the same connection that is used for exchange of client/server
messages, will also be used to transfer data back and forth.  (FTP opens a
separate connection for data transfers.)  We do this to allow the server to
function over transports which can only handle one session at a time (such
as a dialup connection).
 
   
 RESULT CODES
 ------------
 
 The server will respond to all commands with a 3-digit result code, which
will be the first three characters on the line.  The rest of the line may
contain a human-readable string explaining what happened.  (Some client
software will display some of these strings to the user.)
 
 The first digit is the most important.  The following codes are defined for
this position: ERROR, OK, MORE_DATA, LISTING_FOLLOWS, and SEND_LISTING.
 
 The second and third digits may provide a reason as to why a command
succeeded or failed.  See ipcdef.h for the available codes.
 
 ERROR means the command did not complete.
 OK means the command executed successfully.
 MORE_DATA means the command executed partially.  Usually this means that
another command needs to be executed to complete the operation.  For example,
sending the USER command to log in a user usually results in a MORE_DATA
result code, because the client needs to execute a PASS command to send the
password and complete the login.
 LISTING_FOLLOWS means that after the server response, the server will
output a listing of some sort.  The client *must* read the listing, whether
it wants to or not.  The end of the listing is signified by the string
"000" on a line by itself.
 SEND_LISTING is the opposite of LISTING_FOLLOWS.  It means that the client
should begin sending a listing of some sort.  The client *must* send something,
even if it is an empty listing.  Again, the listing ends with "000" on a line
by itself.
  
  
 PARAMETERIZATION
 ----------------
 
 Zero or more parameters may be passed to a command.  When more than one
parameter is passed to a command, they should be separated by the "|"
symbol like this:
  SETU 80|24|260
 In this example, we're using the "SETU" command and passing three
parameters: 80, 24, and 260.
 
 When the server spits out data that has parameters, if more than one
parameter is returned, they will be separated by the "|" symbol like
this:
  200 80|24|260
 In this example, we just executed the "GETU" command, and it returned us
an OK result code (the '2' in the 200) and three parameters: 80, 24, and
260.
 
 
 COMMANDS
 --------
 
 This is a listing of all the commands that a Citadel/UX server can execute.
 
   
 NOOP   (NO OPeration)
 
 This command does nothing.  It takes no arguments and always returns
OK.  It is intended primarily for testing and development, but it might also
be used as a "keep alive" command to prevent the server from timing out, if
it's running over a transport that needs this type of thing.
 
   
 ECHO   (ECHO something)
 
 This command also does nothing.  It simply returns OK followed by whatever
its arguments are.
 
  
 QUIT   (QUIT)
  
 Terminate the server connection.  This command takes no arguments.  It
returns OK and closes the connection immediately.
 
 
 LOUT   (LogOUT)
 
 Log out the user without closing the server connection.  It always returns
OK even if no user is logged in.
 
  
 USER   (send USER name)
 
 The first step in logging in a user.  This command takes one argument: the
name of the user to be logged in.  If the user exists, a MORE_DATA return
code will be sent, which means the client should execute PASS as the next
command.  If the user does not exist, ERROR is returned.
 
 
 PASS   (send PASSword)
 
 The second step in logging in a user.  This command takes one argument: the
password for the user we are attempting to log in.  If the password doesn't
match the correct password for the user we specified for the USER command,
or if a USER command has not been executed yet, ERROR is returned.  If the
password is correct, OK is returned and the user is now logged in... and
most of the other server commands can now be executed.  Along with OK, the
following parameters are returned:
 
 0 - The user's name (in case the client wants the right upper/lower casing)
 1 - The user's current access level
 2 - Times called
 3 - Messages posted
 4 - Various flags (see citadel.h)
 5 - User number
 
 
 NEWU   (create NEW User account)
 
 This command creates a new user account and logs it in.  The argument to
this command will be the name of the account.  No case conversion is done
on the name.  Note that the new account is installed with a default
configuration, and no password, so the client should immediately prompt the
user for a password and install it with the SETP command as soon as this
command completes.  This command returns OK if the account was created and
logged in, or ERROR if another user already exists with this name.  If OK,
it will also return the same parameters that PASS returns.
 
  
 AUTO   (AUTOmatic login   **OBSLETE** )
   
 Citadel/UX no longer supports this type of authentication.  It was formerly
used to automatically authenticate a user based on the user ID under which
the server was running.  Due to the new multithreaded architecture of the
server, this is no longer possible.
  
   
 SETP   (SET new Password)
 
 This command sets a new password for the currently logged in user.  The
argument to this command will be the new password.  The command always
returns OK, unless the client is not logged in, in which case it will return
ERROR.
 
   
 LKRN   (List Known Rooms with New messages)
 
 List known rooms with new messages.  If the client is not logged in, ERROR
is returned.  Otherwise, LISTING_FOLLOWS is returned, followed by the room
listing.  Each line in the listing contains the full name of a room, followed
by the '|' symbol, and then a number that may contain the following bits:


#define QR_PERMANENT    1               /* Room does not purge              */
#define QR_PRIVATE      4               /* Set for any type of private room */
#define QR_PASSWORDED   8               /* Set if there's a password too    */
#define QR_GUESSNAME    16              /* Set if it's a guessname room     */
#define QR_DIRECTORY    32              /* Directory room                   */
#define QR_UPLOAD       64              /* Allowed to upload                */
#define QR_DOWNLOAD     128             /* Allowed to download              */
#define QR_VISDIR       256             /* Visible directory                */
#define QR_ANONONLY     512             /* Anonymous-Only room              */
#define QR_ANON2        1024            /* Anonymous-Option room            */
#define QR_NETWORK      2048            /* Shared network room              */
#define QR_PREFONLY     4096            /* Preferred status needed to enter */
#define QR_READONLY     8192            /* Aide status required to post     */


 Other bits may be defined in the future.  The listing terminates, as with
all listings, with "000" on a line by itself.
 
 Version 4.01 and above only:

 Starting with version 4.01 and above, floors are supported.  The first 
argument to LKRN should be the number of the floor to list rooms from.  Only
rooms from this floor will be listed.  If no arguments are passed to LKRN, or
if the floor number requested is (-1), rooms on all floors will be listed.
 
 The third field displayed on each line is the number of the floor the room
is on.  The LFLR command should be used to associate floor numbers with
floor names.

 
 
 LKRO   (List Known Rooms with Old [no new] messages)
 
 This follows the same usage and format as LKRN.
 
 
 LZRM   (List Zapped RooMs)
 
 This follows the same usage and format as LKRN and LKRO.
  
  
 LKRA   (List All Known Rooms)
 
 Same format.  Lists all known rooms, with or without new messages.
 
 
 LRMS   (List all accessible RooMS)
 
 Again, same format.  This command lists all accessible rooms, known and
forgotten, with and without new messages.  It does not, however, list
inaccessible private rooms.
  
 
 GETU   (GET User configuration)
 
 This command retrieves the screen dimensions and user options for the
currently logged in account.  ERROR will be returned if no user is logged
in, of course.  Otherwise, OK will be returned, followed by three parameters.
The first parameter is the user's screen width, the second parameter is the
user's screen height, and the third parameter is a bag of bits with the
following meanings:
  
 #define US_LASTOLD     16              /* Print last old message with new  */
 #define US_EXPERT      32              /* Experienced user                 */
 #define US_UNLISTED    64              /* Unlisted userlog entry           */
 #define US_NOPROMPT    128             /* Don't prompt after each message  */
 #define US_DISAPPEAR   512             /* Use "disappearing msg prompts"   */
 #define US_PAGINATOR   2048            /* Pause after each screen of text  */
 
 There are other bits, too, but they can't be changed by the user (see below).
 
 
 SETU   (SET User configuration)
 
 This command does the opposite of SETU: it takes the screen dimensions and
user options (which were probably obtained with a GETU command, and perhaps
modified by the user) and writes them to the user account.  This command
should be passed three parameters: the screen width, the screen height, and
the option bits (see above).
 
 Note that there exist bits here which are not listed in this document.  Some
are flags that can only be set by Aides or the system administrator.  SETU
will ignore attempts to toggle these bits.  There also may be more user 
settable bits added at a later date.  To maintain later downward compatibility,
the following procedure is suggested:
 
 1. Execute GETU to read the current flags
 2. Toggle the bits that we know we can toggle
 3. Execute SETU to write the flags
 
 If we are passed a bit whose meaning we don't know, it's best to leave it
alone, and pass it right back to the server.  That way we can use an old
client on a server that uses an unknown bit without accidentally clearing
it every time we set the user's configuration.
 
 
 GOTO   (GOTO a room)
 
 This command is used to goto a new room.  When the user first logs in (login
is completed after execution of the PASS command) this command is
automatically and silently executed to take the user to the first room in the
system (usually called the Lobby).
 
 This command can be passed one or two parameters.  The first parameter is,
of course, the name of the room.  Although it is not case sensitive, the
full name of the room must be used.  Wildcard matching or unique string
matching of room names should be the responsibility of the client.
 
 Note that the reserved room name "_BASEROOM_" can be passed to the server
to cause the goto command to take the user to the first room in the system,
traditionally known as the Lobby>.   As long as a user is logged in, a
GOTO command to _BASEROOM_ is guaranteed to succeed.  This is useful to
allow client software to return to the base room when it doesn't know
where else to go.
 
 Citadel/UX server v4.01 and above, also has two additional reserved room
names.  "_MAIL_" translates to the system's designated room for e-mail
messages, and "_BITBUCKET_" goes to whatever room has been chosen for messages
without a home.
 
 The second (and optional) parameter is a password, if one is required for
access to the room.  This allows for all types of rooms to be accessed via
this command: for public rooms, invitation-only rooms to which the user
has access, and preferred users only rooms to which the user has access, the
room will appear in a room listing.  For guess-name rooms, this command
will work transparently, adding the room to the user's known room list when
it completes.  For passworded rooms, access will be denied if the password
is not supplied or is incorrect, or the command will complete successfully
if the password is correct.
 
 The possible result codes are:
  
 OK    - The command completed successfully.  User is now in the room.
         (See the list of returned parameters below)
 
 ERROR - The command did not complete successfully.  Check the second and
third positions of the result code to find out what happened:
 
   NOT_LOGGED_IN     -  Of course you can't go there.  You didn't log in.
   PASSWORD_REQUIRED -  Either a password was not supplied, or the supplied
password was incorrect.
   NO_SUCH_ROOM      -  The requested room does not exist.
 
 The typical procedure for entering a passworded room would be:
 
 1. Execute a GOTO command without supplying any password.
 2. ERROR+PASSWORD_REQUIRED will be returned.  The client now knows that
the room is passworded, and prompts the user for a password.
 3. Execute a GOTO command, supplying both the room name and the password.
 4. If OK is returned, the command is complete.  If, however,
ERROR+PASSWORD_REQUIRED is still returned, tell the user that the supplied
password was incorrect.  The user remains in the room he/she was previously
in.
 
 When the command succeeds, these parameters are returned:
   0. The name of the room
   1. Number of unread messages in this room
   2. Total number of messages in this room
   3. Info flag: set to nonzero if the user needs to read this room's info
      file (see RINF command below)
   4. Various flags associated with this room.  (See LKRN cmd above)
   5. The highest message number present in this room
   6. The highest message number the user has read in this room
   7. Boolean flag: 1 if this is a Mail> room, 0 otherwise.
   8. Aide flag: 1 if the user is either the Room Aide for this room, *or* is
a regular Aide (this makes access checks easy).
 
  ...and in server 4.01 and above:
   9. The number of new Mail messages the user has (useful for alerting the
user to the arrival of new mail during a session)
  
  ...and in server 4.03 and above:
  10. The floor number this room resides on
  
  
 MSGS   (get pointers to MeSsaGeS in this room)
 
 This command obtains a listing of all the messages in the current room
which the client may request.  This command may be passed a single parameter:
either "all", "old", or "new" to request all messages, only old messages, or
new messages.  Or it may be passed two parameters: "last" plus a number, in which
case that many message pointers will be returned, or "first" plus a number, for
the corresponding effect.  If no parameters are specified, "all" is assumed.
 
 In Citadel/UX 5.00 and above, the client may also specify "gt" plus a number, to
list all messages in the current room with a message number greater than the one
specified.
 
 This command can return two possible results.  An ERROR code may be returned
if no user is currently logged in or if something else went wrong.  Otherwise,
LISTING_FOLLOWS will be returned, and the listing will consist of zero or
more message numbers, one per line.  The listing ends, as always, with the
string "000" alone on a line by itself.  The listed message numbers can be used
to request messages from the system.
 
 
 MSG0   (read MeSsaGe, mode 0)
   
 This is a command used to read the text of a message.  "Mode 0" implies that
other MSG commands (MSG1, MSG2, etc.) will probably be added later on to read
messages in more robust formats.  This command should be passed two arguments.
The first is the message number of the message being requested.  In server 
version 4.04 and above, the second argument may be set to either 0 to read the
entire message, or 1 to read the headers only.  In server version 6.00 and
above, the third argument may be set to the desired section of the message (if
there are attachments).
 
 The server should, of course, make sure that the client actually has access
to the message being requested before honoring this request.  Citadel/UX does
so by checking the message number against the contents of the current room.  If
it's not there, the request is denied.
 
 If the request is denied, an ERROR code will be returned.  Otherwise, the
LISTING_FOLLOWS code will be returned, followed by the contents of the message.
The following fields may be sent:
  
 type=   Formatting type.  Currently, there are two defined types.  Type 0 is
"traditional" Citadel formatting.  This means that newlines should be treated
as spaces UNLESS the first character on the next line is a space.  In other
words, only indented lines should generate a newline on the user's screen when
the message is being displayed.  This allows a message to be formatted to the
reader's screen width.  It also allows the use of proportional fonts.
Type 1 is a simple fixed-format message.  The message should be displayed to
the user's screen as is, preferably in a fixed-width font that will fit 80
columns on a screen.
  
 msgn=   The message ID of this message on the system it originated on.
 path=   An e-mailable path back to the user who wrote the message.

 time=   The date and time of the message, in Unix format (the number of
seconds since midnight on January 1, 1970, GMT).

 from=   The name of the author of the message.
 rcpt=   If the message is a private e-mail, this is the recipient.
 room=   The name of the room the message originated in.
 node=   The short node name of the system this message originated on.
 hnod=   The long node name of the system this message originated on.
 
 text    Note that there is no "=" after the word "text".  This string
signifies that the message text begins on the next line.
  
   
 WHOK   (WHO Knows room)
 
 This command is available only to Aides.  ERROR+HIGHER_ACCESS_REQUIRED will
be returned if the user is not an Aide.  Otherwise, it returns
LISTING_FOLLOWS and then lists, one user per line, every user who has
access to the current room.
 
 
 INFO   (get server INFO)
 
 This command will *always* return LISTING_FOLLOWS and then print out a
listing of zero or more strings.  Client software should be written to expect
anywhere from a null listing to an infinite number of lines, to allow later
backward compatibility.  The current implementation defines the following
parts of the listing:
 
 Line 1  - Your unique session ID on the server
 Line 2  - The node name of the server BBS
 Line 3  - Human-readable node name of the server BBS
 Line 4  - The fully-qualified domain name (FQDN) of the server
 Line 5  - The name of the server software, i.e. "Citadel/UX 4.00"
 Line 6  - (The revision level of the server code) * 100
 Line 7  - The geographical location of the BBS (for USA: city and state)
 Line 8  - The name of the system administrator
 Line 9  - A number identifying the server type (see below)
 Line 10 - The text of the system's paginator prompt
 
 (version 4.01 and above only)
 Line 11 - Floor Flag.  1 if the system supports floors, 0 otherwise.
 
 *** NOTE! ***   The "server type" code is intended to promote global
compatibility in a scenario in which developers have added proprietary
features to their servers or clients.  We are attempting to avoid a future
situation in which users need to keep different client software around for
each BBS they use.  *Please*, if you are a developer and plan to add
proprietary features:
 
 -> Your client programs should still be able to utilize servers other than
your own.
 -> Clients other than your own should still be able to utilize your server,
even if your proprietary extensions aren't supported.
 -> Please contact Art Cancro <ajc@uncnsrd.mt-kisco.ny.us> and obtain a unique
server type code, which can be assigned to your server program.
 -> If you document what you did in detail, perhaps it can be added to a
future release of the Citadel/UX program, so everyone can enjoy it.  Better
yet, just work with the Citadel development team on the main source tree.
 
 If everyone follows this scheme, we can avoid a chaotic situation with lots
of confusion about which client program works with which server, etc.  Client
software can simply check the server type (and perhaps the revision level)
to determine ahead of time what commands may be utilized. 
 
 Please refer to "developers.txt" for information on what codes belong to whom.

  
   
 RDIR   (Read room DIRectory)
 
 Use this command to read the directory of a directory room.  ERROR+NOT_HERE
will be returned if the room has no directory, or some other error; ERROR +
HIGHER_ACCESS_REQUIRED will be returned if the room's directory is not
visible and the user does not have Aide or Room Aide privileges; otherwise
LISTING_FOLLOWS will be returned, followed by the room's directory.  Each
line of the directory listing will contain three fields: a filename, the
length of the file, and a description.
 
 The server message contained on the same line with LISTING_FOLLOWS will
contain the name of the system and the name of the directory, such as:
  uncnsrd.mt-kisco.ny.us|/usr/bbs/files/my_room_directory
 
 
 SLRP   (Set Last-message-Read Pointer)
 
 This command is used to mark messages as having been read.  Its sole parameter
is the number of the last message that has been read.  This allows the pointer
to be set at any arbitrary point in the room.  Optionally, the parameter
"highest" may be used instead of a message number, to set the pointer to the
number of the highest message in the room, effectively marking all messages
in the room as having been read (ala the Citadel <G>oto command).

 The command will return OK if the pointer was set, or ERROR if something
went wrong.  If OK is returned, it will be followed by a single argument
containing the message number the last-read-pointer was set to.
 
 
 INVT   (INViTe a user to a room)
 
 This command may only be executed by Aides, or by the room aide for the
current room.  It is used primarily to add users to invitation-only rooms,
but it may also be used in other types of private rooms as well.  Its sole
parameter is the name of the user to invite.
 
 The command will return OK if the operation succeeded, or ERROR if it did
not.  ERROR+HIGHER_ACCESS_REQUIRED may also be returned if the operation
would have been possible if the user had higher access, and ERROR+NOT_HERE
may be returned if the room is not a private room.
 
 
 KICK   (KICK a user out of a room)
 
 This is the opposite of INVT: it is used to kick a user out of a private
room.  It can also be used to kick a user out of a public room, but the
effect will only be the same as if the user <Z>apped the room - a non-stupid
user can simply un-zap the room to get back in.
 
 
 GETR   (GET Room attributes)
 
 This command is used for editing the various attributes associated with a
room.  A typical "edit room" command would work like this:
 1. Use the GETR command to get the current attributes
 2. Change some of them around
 3. Use SETR (see below) to save the changes
 4. Possibly also change the room aide using the GETA and SETA commands
 
 GETR takes no arguments.  It will only return OK if the SETR command will
also return OK.  This allows client software to tell the user that he/she
can't edit the room *before* going through the trouble of actually doing the
editing.  Possible return codes are:
 
 ERROR+NOT_LOGGED_IN          - No user is logged in.
 ERROR+HIGHER_ACCESS_REQUIRED - Not enough access.  Typically, only aides
and the room aide associated with the current room, can access this command.
 ERROR+NOT_HERE               - Lobby>, Mail>, and Aide> cannot be edited.
 OK                           - Command succeeded.  Parameters are returned.
 
 If OK is returned, the following parameters will be returned as well:
 
 0. The name of the room
 1. The room's password (if it's a passworded room)
 2. The name of the room's directory (if it's a directory room)
 3. Various flags (bits) associated with the room (see LKRN cmd above)

 (And on server version 4.01 and above ... )
 4. The floor number on which the room resides
  
  
 SETR   (SET Room attributes)
 
 This command sets various attributes associated with the current room.  It
should be passed the following arguments:
 
 0. The name of the room
 1. The room's password (if it's a passworded room)
 2. The name of the room's directory (if it's a directory room)
 3. Various flags (bits) associated with the room (see LKRN cmd above)
 4. "Bump" flag (see below)
 
 (And on server version 4.01 and above, the client may also send ... )
 5. The floor number on which the room should reside
 
 *Important: You should always use GETR to retrieve the current attributes of
the room, then change what you want to change, and then use SETR to write it
all back.  This is particularly important with respect to the flags: if a
particular bit is set, and you don't know what it means, LEAVE IT ALONE and
only toggle the bits you want to toggle.  This will allow for upward
compatibility.
 
 If the room is a private room, you have the option of causing all users who
currently have access, to forget the room.  If you want to do this, set the
"bump" flag to 1, otherwise set it to 0.
 
 
 GETA
 
 This command is used to get the name of the Room Aide for the current room.
It will return ERROR+NOT_LOGGED_IN if no user is logged in, ERROR if there
is no current room, or OK if the command succeeded.  Along with OK there will
be returned one parameter: the name of the Room Aide.
   
  
 SETA
 
 The opposite of GETA, used to set the Room Aide for the current room.  One
parameter should be passed, which is the name of the user who is to be the
new Room Aide.  Under Citadel/UX, this command may only be executed by Aides
and by the *current* Room Aide for the room.  Return codes possible are:
 ERROR+NOT_LOGGED_IN            (Not logged in.)
 ERROR+HIGHER_ACCESS_REQUIRED   (Higher access required.)
 ERROR+NOT_HERE                 (No current room, or room cannot be edited.
Under Citadel/UX, the Lobby> Mail> and Aide> rooms are non-editable.)
 OK                             (Command succeeded.)
  
 
 ENT0   (ENTer message, mode 0)
  
 This command is used to enter messages into the system.  It accepts four
arguments:
 
  0  -  Post flag.  This should be set to 1 to post a message.  If it is
set to 0, the server only returns OK or ERROR (plus any flags describing
the error) without reading in a message.  Client software should, in fact,
perform this operation at the beginning of an "enter message" command
*before* starting up its editor, so the user does not end up typing a message
in vain that will not be permitted to be saved.  If it is set to 2, the
server will accept an "apparent" post name if the user is privileged enough. 
This post name is arg 4.
  1  -  Recipient.  This argument is utilized only for private mail messages.
It is ignored for public messages.  It contains, of course, the name of the
recipient of the message.
  2  -  Anonymous flag.  This argument is ignored unless the room allows
anonymous messages.  In such rooms, this flag may be set to 1 to flag a
message as anonymous, otherwise 0 for a normal message.
  3  -  Format type.  Any valid Citadel/UX format type may be used (this will
typically be 0; see the MSG0 command above).
  4  -  Post name.  When postflag is 2, this is the name you are posting as.
This is an Aide only command.
  5  -  Boundary string to be used when there are MIME attachments following
the normal message text.

 Possible result codes:
  OK  -  The request is valid.  (Client did not set the "post" flag, so the
server will not read in message text.)   If the message is an e-mail with
a recipient, the text that follows the OK code will contain the exact name
to which mail is being sent.  The client can display this to the user.  The
implication here is that the name that the server returns will contain the
correct upper and lower case characters.  In addition, if the recipient is
having his/her mail forwarded, the forwarding address will be returned.
  SEND_LISTING  -  The request is valid.  The client should now transmit
the text of the message (ending with a 000 on a line by itself, as usual).
  ERROR  -  Miscellaneous error.  (Explanation probably follows.)
  ERROR + NOT_LOGGED_IN  -  Not logged in.
  ERROR + HIGHER_ACCESS_REQUIRED  -  Higher access is required.  An
explanation follows, worded in a form that can be displayed to the user.
  ERROR + NO_SUCH_USER  -  The specified recipient does not exist.
 
 
 RINF   (read Room INFormation file)
 
 Each room has associated with it a text file containing a description of
the room, perhaps containing its intended purpose or other important
information.  The info file for the Lobby> (the system's base room) is
often used as a repository for system bulletins and the like.
 
 This command, which accepts no arguments, is simply used to read the info
file for the current room.  It will return LISTING_FOLLOWS followed by
the text of the message (always in format type 0) if the request can be
honored, or ERROR if no info file exists for the current room (which is
often the case).  Other error description codes may accompany this result.
 
 When should this command be used?  This is, of course, up to the discretion
of client software authors, but in Citadel it is executed in two situations:
the first time the user ever enters a room; and whenever the contents of the
file change.  The latter can be determined from the result of a GOTO command,
which will tell the client whether the file needs to be read (see GOTO above).
  
  
 DELE   (DELEte a message)
 
 Delete a message from the current room.  The one argument that should be
passed to this command is the message number of the message to be deleted.
The return value will be OK if the message was deleted, or an ERROR code.


 MOVE   (MOVE a message to a different room)
 
 Move a message to a different room.  The two arguments that should be passed
to this command are the message number of the message to be deleted, and the
name of the target room.  If the operation succeeds, the message will be
deleted from the current room and moved to the target room.  An ERROR code
usually means that either the user does not have permission to perform this
operation, or that the target room does not exist.
 

 KILL   (KILL current room)
 
 This command deletes the current room.  It accepts a single argument, which
should be nonzero to actually delete the room, or zero to merely check
whether the room can be deleted.
 
 Once the room is deleted, the current room is undefined.  It is suggested
that client software immediately GOTO another room (usually _BASEROOM_)
after this command completes.
 
 Possible return codes:
 
 OK  -  room has been deleted (or, if checking only, request is valid).
 ERROR+NOT_LOGGED_IN  -  no user is logged in.
 ERROR+HIGHER_ACCESS_REQUIRED  -  not enough access to delete rooms.
 ERROR+NOT_HERE  -  this room can not be deleted.
 
 
 CRE8   (CRE[ate] a new room)
 
 This command is used to create a new room.  Like some of the other
commands, it provides a mechanism to first check to see if a room can be
created before actually executing the command.  CRE8 accepts the following
arguments:
 
 0  -  Create flag.  Set this to 1 to actually create the room.  If it is
set to 0, the server merely checks that there is a free slot in which to
create a new room, and that the user has enough access to create a room.  It
returns OK if the client should go ahead and prompt the user for more info,
or ERROR or ERROR+HIGHER_ACCESS_REQUIRED if the command will not succeed.
 1  -  Name for new room.
 2  -  Access type for new room:
       0  -  Public
       1  -  Private; can be entered by guessing the room's name
       2  -  Private; can be entered by knowing the name *and* password
       3  -  Private; invitation only (sometimes called "exclusive")
 3  -  Password for new room (if it is a type 2 room)
 4  -  Floor number on which the room should reside (optional, and in server
       version 4.01 and above only)
 
 If the create flag is set to 1, the room is created (unless something
went wrong and an ERROR return is sent), and the server returns OK, but
the session is **not** automatically sent to that room.  The client still
must perform a GOTO command to go to the new room.
 
 
 FORG   (FORGet the current room)
 
 This command is used to forget (zap) the current room.  For those not
familiar with Citadel, this terminology refers to removing the room from
a user's own known rooms list, *not* removing the room itself.  After a
room is forgotten, it no longer shows up in the user's known room list,
but it will exist in the user's forgotten room list, and will return to the
known room list if the user goes to the room (in Citadel, this is
accomplished by explicitly typing the room's name in a <.G>oto command).
 
 The command takes no arguments.  If the command cannot execute for any
reason, ERROR will be returned.  ERROR+NOT_LOGGED_IN or ERROR+NOT_HERE may
be returned as they apply.
 
 If the command succeeds, OK will be returned.  At this point, the current
room is **undefined**, and the client software is responsible for taking
the user to another room before executing any other room commands (usually
this will be _BASEROOM_ since it is always there).
  
  
 MESG    (read system MESsaGe)
  
 This command is used to display system messages and/or help files.  The
single argument it accepts is the name of the file to display.  IT IS CASE
SENSITIVE.  Citadel/UX looks for these files first in the "messages"
subdirectory and then in the "help" subdirectory.
  
 If the file is found, LISTING_FOLLOWS is returned, followed by a pathname
to the file being displayed.  Then the message is printed, in format type 0
(see MSG0 command for more information on this).  If the file is not found,
ERROR is returned.
  
 There are some "well known" names of system messages which client software
may expect most servers to carry:
  
 hello        -  Welcome message, to be displayed before the user logs in.
 changepw     -  To be displayed whenever the user is prompted for a new
                 password.  Warns about picking guessable passwords and such.
 register     -  Should be displayed prior to the user entering registration.
                 Warnings about not getting access if not registered, etc.
 help         -  Main system help file.
 goodbye      -  System logoff banner; display when user logs off.
 roomaccess   -  Information about how public rooms and different types of
                 private rooms function with regards to access.
 unlisted     -  Tells users not to choose to be unlisted unless they're
                 really paranoid, and warns that aides can still see
                 unlisted userlog entries.
  
 Citadel/UX provides these for the Citadel/UX Unix text client.  They are
probably not very useful for other clients:
 
 mainmenu     -  Main menu (when in idiot mode).
 aideopt      -  .A?
 readopt      -  .R?
 entopt       -  .E?
 dotopt       -  .?
 saveopt      -  Options to save a message, abort, etc.
 entermsg     -  Displayed just before a message is entered, when in
                 idiot mode.
  
  
 GNUR   (Get Next Unvalidated User)
 
 This command shows the name of a user that needs to be validated.  If there
are no unvalidated users, OK is returned.  Otherwise, MORE_DATA is returned
along with the name of the first unvalidated user the server finds.  All of
the usual ERROR codes may be returned as well (for example, if the user is
not an Aide and cannot validate users).
 
 A typical "Validate New Users" command would keep executing this command,
and then validating each user it returns, until it returns OK when all new
users have been validated.
 
 
 GREG   (Get REGistration for user)
 
 This command retrieves the registration info for a user, whose name is the
command's sole argument.  All the usual error messages can be returned.  If
the command succeeds, LISTING_FOLLOWS is returned, followed by the user's name
(retrieved from the userlog, with the right upper and lower case etc.)  The
contents of the listing contains one field per line, followed by the usual
000 on the last line.  
 
 The following lines are defined.  Others WILL be added in the futre, so all
software should be written to read the lines it knows about and then ignore
all remaining lines: 
 
 Line 1:  User number
 Line 2:  Password
 Line 3:  Real name
 Line 4:  Street address or PO Box
 Line 5:  City/town/village/etc.
 Line 6:  State/province/etc.
 Line 7:  ZIP Code
 Line 8:  Telephone number
 Line 9:  Access level
 Line 10: Internet e-mail address
 
 Users without Aide privileges may retrieve their own registration using
this command.  This can be accomplished either by passing the user's own
name as the argument, or the string "_SELF_".  The command will always
succeed when used in this manner, unless no user is logged in.
 
  
 VALI   (VALIdate user)
 
 This command is used to validate users.  Obviously, it can only be executed
by users with Aide level access.  It should be passed two parameters: the
name of the user to validate, and the desired access level
 
 If the command succeeds, OK is returned.  The user's access level is changed
and the "need validation" bit is cleared.  If the command fails for any 
reason, ERROR, ERROR+NO_SUCH_USER, or ERROR+HIGHER_ACCESS_REQUIRED will be
returned.
   

 EINF   (Enter INFo file for room)
  
 Transmit the info file for the current room with this command.  EINF uses
a boolean flag (1 or 0 as the first and only argument to the command) to
determine whether the client actually wishes to transmit a new info file, or
is merely checking to see if it has permission to do so.
 
 If the command cannot succeed, it returns ERROR.
 If the client is only checking for permission, and permission will be
granted, OK is returned.
 If the client wishes to transmit the new info file, SEND_LISTING is
returned, and the client should transmit the text of the info file, ended
by the usual 000 on a line by itself.
   
   
 LIST   (user LISTing)
  
 This is a simple user listing.  It always succeeds, returning
LISTING_FOLLOWS followed by zero or more user records, 000 terminated.  The
fields on each line are as follows:
  
 1. User name
 2. Access level
 3. User number
 4. Date/time of last login (Unix format)
 5. Times called
 6. Messages posted
 7. Password (listed only if the user requesting the list is an Aide)
 
 Unlisted entries will also be listed to Aides logged into the server, but
not to ordinary users.
  
  
 REGI   (send REGIstration)
 
 Clients will use this command to transmit a user's registration info.  If
no user is logged in, ERROR+NOT_LOGGED_IN is returned.  Otherwise,
SEND_LISTING is returned, and the server will expect the following information
(terminated by 000 on a line by itself):
 
 Line 1:  Real name
 Line 2:  Street address or PO Box
 Line 3:  City/town/village/etc.
 Line 4:  State/province/etc.
 Line 5:  ZIP Code
 Line 6:  Telephone number
 Line 7:  e-mail address
 
 
 CHEK   (CHEcK various things)
 
 When logging in, there are various things that need to be checked.   This
command will return ERROR+NOT_LOGGED_IN if no user is logged in.  Otherwise
it returns OK and the following parameters:
 
 0: Number of new private messages in Mail>
 1: Nonzero if the user needs to register
 2: (Relevant to Aides only) Nonzero if new users require validation
 
 
 DELF   (DELete a File)
 
 This command deletes a file from the room's directory, if there is one.  The
name of the file to delete is the only parameter to be supplied.  Wildcards
are not acceptable, and any slashes in the filename will be converted to
underscores, to prevent unauthorized access to neighboring directories.  The
possible return codes are:
 
 OK                            -  Command succeeded.  The file was deleted.
 ERROR+NOT_LOGGED_IN           -  Not logged in.
 ERROR+HIGHER_ACCESS_REQUIRED  -  Not an Aide or Room Aide.
 ERROR+NOT_HERE                -  There is no directory in this room.
 ERROR+FILE_NOT_FOUND          -  Requested file was not found.
 
 
 MOVF   (MOVe a File)
 
 This command is similar to DELF, except that it moves a file (and its
associated file description) to another room.  It should be passed two
parameters: the name of the file to move, and the name of the room to move
the file to.  All of the same return codes as DELF may be returned, and also
one additional one: ERROR+NO_SUCH_ROOM, which means that the target room
does not exist.  ERROR+NOT_HERE could also mean that the target room does
not have a directory.
 
 
 NETF   (NETwork send a File)
 
 This command is similar to MOVF, except that it attempts to send a file over
the network to another system.  It should be passed two parameters: the name
of the file to send, and the node name of the system to send it to.  All of
the same return codes as MOVF may be returned, except for ERROR+NO_SUCH_ROOM.
Instead, ERROR+NO_SUCH_SYSTEM may be returned if the name of the target
system is invalid.
 
 The name of the originating room will be sent along with the file.  Most
implementations will look for a room with the same name at the receiving end
and attempt to place the file there, otherwise it goes into a bit bucket room
for miscellaneous files.  This is, however, beyond the scope of this document;
see elsewhere for more details.
 
 
 RWHO   (Read WHO's online)
 
 Displays a list of all users connected to the server.  No error codes are
ever returned.  LISTING_FOLLOWS will be returned, followed by zero or more
lines containing the following three fields:
 
 0 - Session ID.  Citadel/UX fills this with the pid of a server program.
 1 - User name.
 2 - The name of the room the user is currently in.  This field might not
be displayed (for example, if the user is in a private room) or it might
contain other information (such as the name of a file the user is
downloading).
 3 - (server v4.03 and above) The name of the host the client is connecting
from, or "localhost" if the client is local.
 4 - (server v4.04 and above) Description of the client software being used
 5 - The last time, locally to the server, that a command was received from
     this client (Note: NOOP's don't count)
 6 - The last command received from a client. (NOOP's don't count)
 7 - Session flags.  These are: + (spoofed address), - (STEALTH mode), *
     (posting) and . (idle).  (Citserver 5.02 and above)
 
 The listing is terminated, as always, with the string "000" on a line by
itself.
 
  
 OPEN   (OPEN a file for download)
 
 This command is used to open a file for downloading.  Only one download
file may be open at a time.  The only argument to this command is the name
of the file to be opened.  The user should already be in the room where the
file resides.  Possible return codes are:
 
 ERROR+NOT_LOGGED_IN
 ERROR+NOT_HERE                (no directory in this room)
 ERROR+FILE_NOT_FOUND          (could not open the file)
 ERROR                         (misc errors)
 OK                            (file is open)
 
 If the file is successfully opened, OK will be returned, along with the
size (in bytes) of the file, and (in version 5.00 and above) the time of last
modification.
 
 
 CLOS   (CLOSe the download file)
 
 This command is used to close the download file.  It returns OK if the
file was successfully closed, or ERROR if there wasn't any file open in the
first place.
 
 
 READ   (READ from the download file)

 Two arguments are passed to this command.  The first is the starting position
in the download file, and the second is the total number of bytes to be 
read.  If the operation can be performed, BINARY_FOLLOWS will be returned,
along with the number of bytes to follow.  Then, immediately following the
newline, will be that many bytes of binary data.  The client *must* read 
exactly that number of bytes, otherwise the client and server will get out
of sync.
 
 If the operation cannot be performed, any of the usual error codes will be
returned.
  
 
 UOPN   (OPeN a file for Uploading)
  
 This command is similar to OPEN, except that this one is used when the 
client wishes to upload a file to the server.  The first argument is the name
of the file to create, and the second argument is a one-line comment
describing the contents of the file.  Only one upload file may be open at a
time.  Possible return codes are:
 
 ERROR+NOT_LOGGED_IN
 ERROR+NOT_HERE               (no directory in this room)
 ERROR+FILE_NOT_FOUND         (a name must be specified)
 ERROR                        (miscellaneous errors)
 ERROR+ALREADY_EXISTS         (a file with the same name already exists)
 OK 
 
 If OK is returned, the command has succeeded and writes may be performed.
 
 
 UCLS   (CLoSe the Upload file)
 
 Close the file opened with UOPN.  An argument of "1" should be passed to
this command to close and save the file; otherwise, the transfer will be
considered aborted and the file will be deleted.  This command returns OK
if the operation succeeded or ERROR if it did not.
 
 
 WRIT   (WRITe to the upload file)
 
 If an upload file is open, this command may be used to write to it.  The
argument passed to this command is the number of bytes the client wishes to
transmit.  An ERROR code will be returned if the operation cannot be
performed.
 
 If the operation can be performed, SEND_BINARY will be returned, followed
by the number of bytes the server is expecting.  The client must then transmit
exactly that number of bytes.  Note that in the current implementation, the
number of bytes the server is expecting will always be the number of bytes
the client requested to transmit, but the client software should never assume
that this will always happen, in case changes are made later.
   
  
 QUSR   (Query for a USeR)
 
 This command is used to check to see if a particular user exists.  The only
argument to this command is the name of the user being searched for.  If
the user exists, OK is returned, along with the name of the user in the userlog
(so the client software can learn the correct upper/lower casing of the name
if necessary).  If the user does not exist, ERROR+NO_SUCH_USER is returned.
No login or current room is required to utilize this command.
 
 
 OIMG   (Open an IMaGe file)
 
 Open an image (graphics) file for downloading.  Once opened, the file can be
read as if it were a download file.  This implies that an image and a download
cannot be opened at the same time.  OIMG returns the same result codes as OPEN.
 
 All images will be in GIF (Graphics Interchange Format).  In the case of 
Citadel/UX, the server will convert the supplied filename to all lower case,
append the characters ".gif" to the filename, and look for it in the "images"
subdirectory.  As with the MESG command, there are several "well known"
images which are likely to exist on most servers:
 
 hello        - "Welcome" graphics to be displayed alongside MESG "hello"
 goodbye      - Logoff banner graphics to be displayed alongside MESG "goodbye"
 background   - Background image (usually tiled) for graphical clients
 
 The following "special" image names are defined in Citadel/UX server version
5.00 and above:
 
 _userpic_    - Picture of a user (send the username as the second argument)
 _floorpic_   - A graphical floor label (send the floor number as the second
                argument).  Clients which request a floor picture will display
                the picture *instead* of the floor name.
 _roompic_    - A graphic associated with the *current* room.  Clients which
                request a room picture will display the picture in *addition*
                to the room name (i.e. it's used for a room banner, as
                opposed to the floor picture's use in a floor listing).
 
   
  
 ---------------------------------------------------------------------------
 The following commands are available only in Citadel/UX server version 4.01
 and above.
 ---------------------------------------------------------------------------
 
 NETP   (authenticate as network session with system NET Password) 
 
 This command is used by client software to identify itself as a transport
session for IGnet/Open BBS to BBS networking.  It should be called with
two arguments: the node name of the calling system, and the system net 
password for the server.  If the authentication succeeds, NETP will return
OK, otherwise, it returns ERROR.
   
  
 NUOP   (Network Upload OPen file)
  
 Open a network spool file for uploading.  The client must have already
identified itself as a network session using the NETP command.  If the command
returns OK, the client may begin transmitting IGnet/Open spool data using
a series of WRIT commands.  When a UCLS command is issued, the spooled data
is entered into the BBS if the argument to UCLS is 1 or discarded if the
argument to UCLS is 0.  If the client has not authenticated itself with a
NETP command, ERROR+HIGHER_ACCESS_REQUIRED will be returned.
 
  
 NDOP   (Network Download OPen file)
 
 Open a network spool file for downloading.  The client must have already
identified itself as a network session using the NETP command.  If the command
returns OK, the client may begin receiving IGnet/Open spool data using
a series of READ commands.  When a CLOS command is issued, the spooled data
is deleted from the server and may not be read again.  If the client has not
authenticated itself with a NETP command, ERROR+HIGHER_ACCESS_REQUIRED will
be returned.
 
 
 LFLR   (List all known FLooRs)
 
 On systems supporting floors, this command lists all known floors.  The
command accepts no parameters.  It will return ERROR+NOT_LOGGED_IN if no
user is logged in.  Otherwise it returns LISTING_FOLLOWS and a list of 
the available floors, each line consisting of three fields:
 
 1. The floor number associated with the floor
 2. The name of the floor
 3. Reference count (number of rooms on this floor)
 
 
 CFLR   (Create a new FLooR)
 
 This command is used to create a new floor.  It should be passed two
arguments: the name of the new floor to be created, and a 1 or 0 depending
on whether the client is actually creating a floor or merely checking to
see if it has permission to create the floor.   The user must be logged in
and have Aide privileges to create a floor.
 
 If the command succeeds, it will return OK followed by the floor number
associated with the new floor.  Otherwise, it will return ERROR (plus perhaps
HIGHER_ACCESS_REQUIRED, ALREADY_EXISTS, or INVALID_FLOOR_OPERATION)
followed by a description of why the command failed.
 
 
 KFLR   (Kill a FLooR)
 
 This command is used to delete a floor.  It should be passed two
argument: the *number* of the floor to be deleted, and a 1 or 0 depending
on whether the client is actually deleting the floor or merely checking to
see if it has permission to delete the floor.  The user must be logged in
and have Aide privileges to delete a floor.
 
 Floors that contain rooms may not be deleted.  If there are rooms on a floor,
they must be either deleted or moved to different floors first.  This implies
that the Main Floor (floor 0) can never be deleted, since Lobby>, Mail>, and
Aide> all reside on the Main Floor and cannot be deleted.
 
 If the command succeeds, it will return OK.  Otherwise it will return
ERROR (plus perhaps HIGHER_ACCESS_REQUIRED or INVALID_FLOOR_OPERATION)
followed by a description of why the command failed.
 
 
 EFLR   (Edit a FLooR)
 
 Edit the parameters of a floor.  The client may pass one or more parameters
to this command:
 
 1. The number of the floor to be edited
 2. The desired new name 
 
 More parameters may be added in the future.  Any parameters not passed to
the server will remain unchanged.  A minimal command would be EFLR and a
floor number -- which would do nothing.  EFLR plus the floor number plus a
floor name would change the floor's name.
 
 If the command succeeds, it will return OK.  Otherwise it will return
ERROR (plus perhaps HIGHER_ACCESS_REQUIRED or INVALID_FLOOR_OPERATION)
  
 ---------------------------------------------------------------------------
 The following commands are available only in Citadel/UX server version 4.02
 and above.
 ---------------------------------------------------------------------------

IDEN (IDENtify the client software)

 The client software has the option to identify itself to the server.
Currently, the server does nothing with this information except to write
it to the syslog to satisfy the system administrator's curiosity.  Other
uses might become apparent in the future. 
 
 The IDEN command should contain five fields: a developer ID number (same as
the server developer ID numbers in the INFO command -- please obtain one if
you are a new developer), a client ID number (which does not have to be
globally unique - only unique within the domain of the developer number),
a version number, a free-form text string describing the client, and the name
of the host the user is located at.
 
 It is up to the server to determine whether to accept the host name or to
use the host name it has detected itself.  Generally, if the client is
running on a trusted host (either localhost or a well-known publically
accessible client) it should use the host name transmitted by IDEN,
otherwise it should use the host name it has detected itself.
 
 IDEN always returns OK, but since that's the only way it ever returns
there's no point in checking the result code.
  
 ---------------------------------------------------------------------------
 The following commands are available only in Citadel/UX server version 4.03
 and above.
 ---------------------------------------------------------------------------

IPGM (identify as an Internal ProGraM)
 
 IPGM is a low-level command that should not be used by normal user clients. 
It is used for various utilities to communicate with the server on the same
host.  For example, the networker (netproc.c) logs onto the server as an
internal program in order to fetch and store messages.  Since user clients
do not utilize this command (or any of its companion commands), developers
writing Citadel-compatible servers need not implement it.
 
 The sole argument to IPGM is the system's internal program password.  This
password is generated by the setup program and stored in the config file.
Since internal programs have access to the config file, they know the correct
password to use.
 
 IPGM returns OK for a correct authentication or ERROR otherwise.
 
 
CHAT (enter CHAT mode)
 
 This command functions differently from every other command in the system.  It
is used to implement multi-user chat.  For this to function, a new transfer
mode, called START_CHAT_MODE, is implemented.  If a client does not support
chat mode, it should never send a CHAT command!
 
 In chat mode, messages may arrive asynchronously from the server at any
time.  The client may send messages at any time.  This allows the arrival of
messages without the client having to poll for them.  Arriving messages will
be of the form  "user|message", where the "user" portion is, of course, the
name of the user sending the message, and "message" is the message text.
  
 Chat mode ends when the server says it ends.  The server will signal the end
of chat mode by transmitting "000" on a line by itself.  When the client reads
this line, it must immediately exit from chat mode without sending any
further traffic to the server.  The next transmission sent to the server
will be a regular server command.
 
 The Citadel/UX server understands the following commands:
 /quit   -   Exit from chat mode (causes the server to do an 000 end)
 /who    -   List users currently in chat
 /whobbs -   List users currently in chat and on the bbs
 /me     -   Do an irc-style action.
 /join   -   Join a new "room" in which all messages are only heard by
             people in that room.
 /msg    -   /msg <user> <msg> will send the msg to <user> only.
 /help   -   Print help information
 NOOP    -   Do nothing (silently)
 
 Any other non-empty string is treated as message text and will be broadcast
to other users currently in chat.
 
  
 SEXP   (Send EXPress messages)
 
 This is one of two commands which implement "express messages" (also known
as "paging").  An express message is a near-real-time message sent from one
logged in user to another.  When an express message is sent, it will be
displayed the next time the target user executes a PEXP command.
 
 The SEXP command accepts two arguments: the name of the user to send the
message to, and the text of the message.  If the message is successfully
transmitted, OK is returned.  If the target user is not logged in or if
anything else goes wrong, ERROR is returned.
 
 In Citadel/UX 5.00 and above, the reserved name "broadcast" may be used
instead of a user name, to broadcast an express message to all users
currently connected to the server.
 
 Do be aware that if an express message is transmitted to a user who is logged
in using a client that does not check for express messages, the message will
never be received.
 
 
 PEXP   (Print EXPress messages)
 
 This command, called without any arguments, simply dumps out the contents
of any waiting express messages.  It returns ERROR if there is a problem,
otherwise it returns LISTING_FOLLOWS followed by all messages.
 
 So how does the client know there are express messages waiting?  It could
execute a random PEXP every now and then.  Or, it can check the byte in
server return code messages, between the return code and the parameters.  In
much the same way as FTP uses "-" to signify a continuation, Citadel uses
an "*" in this position to signify the presence of waiting express messages.
  
 ---------------------------------------------------------------------------
 The following commands are available only in Citadel/UX server version 4.10
 and above.
 ---------------------------------------------------------------------------
 
 EBIO   (Enter BIOgraphy)
 
 Transmit to the server a free-form text file containing a little bit of
information about the user for other users to browse.  This is typically
referred to as a 'bio' online.  EBIO returns SEND_LISTING if it succeeds,
after which the client is expected to transmit the file, or any of the usual
ERROR codes if it fails.
 
 
 RBIO   (Read BIOgraphy)
 
 Receive from the server a named user's bio.  This command should be passed
a single argument - the name of the user whose bio is requested.  RBIO returns
LISTING_FOLLOWS plus the bio file if the user exists and has a bio on file,
ERROR+NO_SUCH_USER if the named user does not exist, or ERROR+FILE_NOT_FOUND
if the user exists but has no bio on file.
  
 ---------------------------------------------------------------------------
 The following commands are available only in Citadel/UX server version 4.11
 and above.
 ---------------------------------------------------------------------------
  
 STEL   (enter STEaLth mode)
 
 When in "stealth mode," a user will not show up in the "Who is online"
listing (the RWHO server command).  Only Aides may use stealth mode.  The
STEL command accepts one argument: a 1 indicating that the user wishes to
enter stealth mode, or a 0 indicating that the user wishes to exit stealth
mode.  STEL returns OK if the command succeeded, ERROR+NOT_LOGGED_IN if no
user is logged in, or ERROR+HIGHER_ACCESS_REQUIRED if the user is not an Aide.

The STEL command also makes it so a user does not show up in the chat room
/who.  
 
 
 LBIO   (List users who have BIOs on file)
 
 This command is self-explanatory.  Any user who has used EBIO to place a bio
on file is listed.  LBIO almost always returns LISTING_FOLLOWS followed by
this listing, unless it experiences an internal error in which case ERROR
is returned.
 
 
 MSG2   (read MeSsaGe, mode 2)
 
 MSG2 follows the same calling convention as MSG0.  The difference between
the two commands is that MSG2 outputs messages in standard RFC822 format
rather than in Citadel/UX proprietary format.
 
 This command was implemented in order to make various gateway programs
easier to implement, and to provide some sort of multimedia support in the
future.  Keep in mind that when this command is used, all messages will be
output in fixed 80-column format.
  
 ---------------------------------------------------------------------------
 The following commands are available only in Citadel/UX server version 5.00
 and above.
 ---------------------------------------------------------------------------
   
 MSG3   (read MeSsaGe, mode 3 -- internal command)
 
 MSG3 is for use by internal programs only and should not be utilized by
user-mode clients.  It does require IPGM authentication.  MSG3 follows the
same calling convention as the other MSG commands, but upon success returns
BINARY_FOLLOWS followed by a data block containing the _raw_ message format
on disk.
  
   
 ENT3   (ENTer message, mode 3 -- internal command)
 
 ENT3 is for use by internal programs only and should not be utilized by
user-mode clients.  It does require IPGM authentication.  This command posts
a raw message straight into the message base without modification or performing
any checks.   It accepts the following arguments:
 
  0  -  Post flag.  This should be set to 1 to post a message.  If it is
set to 0, the server only returns OK or ERROR (plus any flags describing
the error) without reading in a message.  This is used to verify the operation
before actually transmitting a message.
  1  -  Recipient.  This argument is utilized only for private mail messages.
It is ignored for public messages.  It contains, of course, the name of the
recipient of the message.
  2  -  The size (in bytes) of the message to be transmitted.

 ENT3 returns OK to tell the client that a message can be posted, ERROR if
there would be a problem with the operation, or SEND_BINARY followed by a byte
count if it is expecting the message to be transmitted.
  
  
 TERM   (TERMinate another session)
 
 In a multithreaded environment, it sometimes becomes necessary to terminate
a session that is unusable for whatever reason.  The TERM command performs
this task.  Naturally, only Aides can execute TERM.  The command should be
called with a single argument: the session ID (obtained from an RWHO command)
of the session to be terminated.
 
 TERM returns OK if the session was terminated, or ERROR otherwise.  Note that
a client program is prohibited from terminating the session it is currently
running on.
 
 
 NSET   (Network SETup commands)
 
 Aides may use this command to configure the networker.  This command's
parameters are passed directly to the 'netsetup' command line utility.   If
netsetup returns a non-zero exit code, ERROR is returned, along with the
error message (if any).  If netsetup returns a zero (success) exit code,
LISTING_FOLLOWS is returned, followed by zero or more lines of output (since
netsetup may have information to display, such as a room or node list) and
the usual '000' listing terminator.
 
 
 DOWN   (shut DOWN the server)
 
 This command, which may only be executed by an Aide, immediately shuts down
the server.  It is only implemented on servers on which such an operation is
possible, such as a multithreaded Citadel engine.  The server does not restart.
DOWN returns OK if the user is allowed to shut down the server, in which case
the client program should expect the connection to be immediately broken.
 
 
 SCDN   (Schedule or Cancel a shutDowN)
 
 SCDN sets or clears the "scheduled shutdown" flag.  Pass this command a 1 or
0 to respectively set or clear the flag.  When the "scheduled shutdown" flag is
set, the server will be shut down when there are no longer any users logged in.
Any value other than 0 or 1 will not change the flag, only report its state.
No users will be kicked off the system, and in fact the server is still available
for new connections.  The command returns ERROR if it fails; otherwise, it
returns OK followed by a number representing the current state of the flag.
 
 
 EMSG   (Enter a system MeSsaGe)
 
 This is the opposite of the MESG command - it allows the creation and editing
of system messages.  The only argument passed to EMSG is the name of the
file being transmitted.  If the file exists in any system message directory
on the server it will be overwritten, otherwise a new file is created.  EMSG
returns SEND_LISTING on success or ERROR+HIGHER_ACCESS_REQUIRED if the user
is not an Aide.
 
 Typical client software would use MESG to retrieve any existing message into
an edit buffer, then present an editor to the user and run EMSG if the changes
are to be saved.
 
 
 UIMG   (Upload an IMaGe file)
 
 UIMG is complemenary to OIMG; it is used to upload an image to the server.
The first parameter supplied to UIMG should be 0 if the client is only checking
for permission to upload, or 1 if the client is actually attempting to begin
the upload operation.  The second argument is the name of the file to be
transmitted.  In Citadel/UX, the filename is converted to all lower case,
appended with the characters ".gif", and stored in the "images" directory.
  
 UIMG returns OK if the client has permission to perform the requested upload,
or ERROR+HIGHER_ACCESS_REQUIRED otherwise.  If the client requested to begin
the operation (first parameter set to 1), an upload file is opened, and the
client should begin writing to it with WRIT commands, then close it with a
UCLS command.
 
 The supplied filename should be one of:
 
 ->  _userpic_   (Server will attempt to write to the user's online photo)
 ->  Any of the "well known" filenames described in the writeup for the 
     OIMG command.

----------------------------------------------
The following are for citserver 5.02 and above
----------------------------------------------

 HCHG   (Hostname CHanGe)

 HCHG is a command, usable by any user, that allows a user to change their RWHO
host value.  This will mask a client's originating hostname from normal
users; access level 6 and higher see an entry right underneath the spoofed
entry listing the actual hostname the user originates from.

 The format of an HCHG command is:

 HCHG <name>

 If a HCHG command is successful, the value OK (200) is returned.


 RCHG   (Roomname CHanGe)

 RCHG is a command, usable by any user, that allows a user to change their RWHO
room value.  This will mask a client's roomname from normal users; access
level 6 and higher see an entry right underneath the spoofed entry listing
the actual room the user is in.

 The format of an RCHG command is:

 RCHG <name>

 If a RCHG command is successful, the value OK (200) is returned.


 UCHG   (Username CHanGe)

 UCHG is an aide-level command which allows an aide to effectively change their
username.  If this value is blank, the user goes into stealth mode (see
STEL).  Posts
will show up as being from the real username in this mode, however.  In
addition, the RWHO listing will include both the spoofed and real usernames.

 The format of an UCHG command is:
 
 UCHG <name>

 If a UCHG command is successful, the value OK (200) is returned.


 TIME   (get server local TIME)

 TIME returns OK followed by the current time measured in seconds since
00:00:00 GMT, Jan 1, 1970.

 This is used in allowing a client to calculate idle times.


----------------------------------------------
The following are for citserver 5.50 and above
----------------------------------------------

 AGUP   (Administrative Get User Parameters)
 ASUP   (Administrative Set User Parameters)
  
 These commands are only executable by Aides and by server extensions running
at system-level.  They are used to get/set any and all parameters relating to
a user account.  AGUP requires only one argument: the name of the user in
question.  SGUP requires all of the parameters to be set.  The parameters are
as follows, and are common to both commands:
 
 0 - User name
 1 - Password
 2 - Flags (see citadel.h)
 3 - Times called
 4 - Messages posted
 5 - Access level
 6 - User number
 7 - Timestamp of last call
 8 - Purge time (in days) for this user (or 0 to use system default)

 Upon success, AGUP returns OK followed by all these parameters, and ASUP
simply returns OK.  If the client has insufficient access to perform the
requested operation, ERROR+HIGHER_ACCESS_REQUIRED is returned.  If the
requested user does not exist, ERROR+NO_SUCH_USER is returned.
 
 
 
 GPEX   (Get Policy for message EXpiration)
 
 Returns the policy of the current room, floor, or site regarding the automatic
purging (expiration) of messages.  The following policies are available:
   0  -  Fall back to the policy of the next higher level.  If this is a room,
         use the floor's default policy.  If this is a floor, use the system
         default policy.  This is an invalid value for the system policy.
   1  -  Do not purge messages automatically.
   2  -  Purge by message count.  (Requires a value: number of messages)
   3  -  Purge by message age.  (Requires a value: number of days)
 
 The format of this command is:  GPEX <which>
 The value of <which> must be one of: "room" "floor" "site"
 
 If successful, GPEX returns OK followed by <policy>|<value>.



 SPEX   (Set Polict for message EXpiration)
 
 Sets the policy of the current room, floor, or site regarding the automatic
purging (expiration) of messages.  See the writeup for the GPEX command for
the list of available policies.
 
 The format of this command is:  SPEX <which>|<policy>|<value>
 The value of <which> must be one of: "room" "floor" "site"
 
 If successful, GPEX returns OK; otherwise, an ERROR code is returned.
 
 
 
 CONF   (get or set global CONFiguration options)
 
 Retrieves or sets various system-wide configuration and policy options.  This
command is only available to Aides.  The sole parameter accepted is a command,
which should be either GET or SET.  If the GET command succeeds, CONF will
return LISTING_FOLLOWS followed by the fields described below, one line at a
time.  If the SET command succeeds, CONF will return SEND_LISTING and expect
the fields described below, one line at a time (don't worry about other fields
being added in the future; if a 'short' configuration list is sent, the missing
values at the end will be left unchanged on the system).  If either command
fails for any reason, ERROR is returned.
 
 The configuration lines are as follows:
 
 1. Node name
 2. Fully qualified domain name
 3. Human-readable node name
 4. Landline telephone number of this system
 5. Flag (0 or 1) - creator of private room automatically becomes room aide
 6. Server connection idle timeout (in seconds)
 7. Initial access level for new users
 8. Flag (0 or 1) - require registration for new users
 9. Flag (0 or 1) - automatically move Problem User messages to twit room
 10. Name of twit room
 11. Text of <more> prompt
 12. Flag (0 or 1) - restrict access to Internet mail
 13. Geographic location of this system
 14. Name of the system administrator
 15. Number of maximum concurrent sessions allowed on the server
 16. Password for server-to-server networking
 17. Default purge time (in days) for users
 18. Default purge time (in days) for rooms
 
  
 
 EXPI   (EXPIre system objects)
 
 Begins purge operations for objects which, according to site policy, are
"old" and should be removed.  EXPI should be called with one argument, one of:
 
    "messages"     (purge old messages out of each room)
    "users"        (purge old users from the userlog)
  
 EXPI returns OK (probably after a long delay while it does its work) if it
succeeds; otherwise it returns an ERROR code.
 
 This command is probably temporary, until we can work some sort of scheduler
into the system.  It is implemented in the serv_expire module.