# config.mk is generated by ./configure
include config.mk
-citserver: server/*.c server/modules/*/*.c config.mk
+all: citserver setup
+
+citserver: server/*.c server/modules/*/*.c config.mk server/*.h
cc ${CFLAGS} \
server/*.c server/modules/*/*.c \
${LDFLAGS} -lresolv -lcitadel -lpthread -lz -lical -lldap -lcrypt -lexpat -lcurl -ldb \
-o citserver
+setup: utils/setup.c server/citadel_dirs.c utils/*.h server/*.h
+ cc ${CFLAGS} utils/setup.c -lcitadel -o setup
+
config.mk: configure
./configure
+
+clean:
+ rm -vf citserver
+ find . -name *.o | xargs rm -vf
+ rm -vf config.mk
+
+# In conf-IG-ure, "distclean" is the same as "clean"
+distclean: clean
+++ /dev/null
-# CIT_STRUCT_TM
-# ------------------
-# Figure out how to get the current GMT offset. If `struct tm' has a
-# `tm_gmtoff' member, define `HAVE_STRUCT_TM_TM_GMTOFF'. Otherwise, if the
-# external variable `timezone' is found, define `HAVE_TIMEZONE'.
-AC_DEFUN([CIT_STRUCT_TM],
-[AC_REQUIRE([AC_STRUCT_TM])dnl
-AC_CHECK_MEMBERS([struct tm.tm_gmtoff],,,[#include <sys/types.h>
-#include <$ac_cv_struct_tm>
-])
-if test "$ac_cv_member_struct_tm_tm_gmtoff" != yes; then
- AC_CACHE_CHECK(for timezone, ac_cv_var_timezone,
-[AC_TRY_LINK(
-[#include <time.h>],
-[printf("%ld", (long)timezone);], ac_cv_var_timezone=yes, ac_cv_var_timezone=no)])
- if test $ac_cv_var_timezone = yes; then
- AC_DEFINE(HAVE_TIMEZONE, 1,
- [Define if you don't have `tm_gmtoff' but do have the external
- variable `timezone'.])
- fi
-fi
-])# CIT_STRUCT_TM
-
-AC_DEFUN([AC_CHECK_DB],[
-for lib in $1
-do
- AS_VAR_PUSHDEF([ac_tr_db], [ac_cv_db_lib_${lib}])dnl
- bogo_saved_LIBS="$LIBS"
- LIBS="$LIBS -l$lib"
- AC_CACHE_CHECK([for db_create in -l${lib}], ac_tr_db,
- [AC_TRY_LINK([#include <db.h>], [int foo=db_create((void *)0, (void *) 0,
-0 )],
- [AS_VAR_SET(ac_tr_db, yes)],
- [AS_VAR_SET(ac_tr_db, no)])
- ])
- AS_IF([test AS_VAR_GET(ac_tr_db) = yes],
- [$2
- LIBS="$bogo_saved_LIBS"
- SERVER_LIBS="$SERVER_LIBS -l$lib"
- db=yes],
- [LIBS="$bogo_saved_LIBS"
- db=no])
- AS_VAR_POPDEF([ac_tr_db])dnl
-test "$db" = "yes" && break
-done
-if test "$db" = "no"; then
-$3
-fi
-])# AC_CHECK_DB
-
+++ /dev/null
-// system-level password checking for host auth mode
-// by Nathan Bryant, March 1999
-// updated by Trey van Riper, June 2005
-//
-// Copyright (c) 1999-2016 by the citadel.org team
-//
-// This program is open source software. Use, duplication, or disclosure
-// is subject to the terms of the GNU General Public License, version 3.
-// The program is distributed without any warranty, expressed or implied.
-
-#if defined(__linux) || defined(__sun) // needed for crypt():
-#define _XOPEN_SOURCE
-#define _XOPEN_SOURCE_EXTENDED 1
-#endif
-
-#include <pwd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-
-#include "auth.h"
-#include "sysdep.h"
-
-#ifdef HAVE_GETSPNAM
-#include <shadow.h>
-#endif
-
-#ifdef HAVE_PAM_START
-#include <security/pam_appl.h>
-
-// struct appdata: passed to the conversation function
-struct appdata {
- const char *name;
- const char *pw;
-};
-
-// conv(): the PAM conversation function. this assumes that a
-// PAM_PROMPT_ECHO_ON is asking for a username, and a PAM_PROMPT_ECHO_OFF is
-// asking for a password. esoteric authentication modules will fail with this
-// code, but we can't really support them with the existing client protocol
-// anyway. the failure mode should be to deny access, in any case.
-static int conv(int num_msg, const struct pam_message **msg, struct pam_response **resp, void *appdata_ptr) {
- struct pam_response *temp_resp;
- struct appdata *data = appdata_ptr;
-
- if ((temp_resp =
- malloc(sizeof(struct pam_response[num_msg]))) == NULL)
- return PAM_CONV_ERR;
-
- while (num_msg--) {
- switch ((*msg)[num_msg].msg_style) {
- case PAM_PROMPT_ECHO_ON:
- temp_resp[num_msg].resp = strdup(data->name);
- break;
- case PAM_PROMPT_ECHO_OFF:
- temp_resp[num_msg].resp = strdup(data->pw);
- break;
- default:
- temp_resp[num_msg].resp = NULL;
- }
- temp_resp[num_msg].resp_retcode = 0;
- }
-
- *resp = temp_resp;
- return PAM_SUCCESS;
-}
-#endif // HAVE_PAM_START
-
-
-// check that `pass' is the correct password for `uid'
-// returns zero if no, nonzero if yes
-int validate_password(uid_t uid, const char *pass) {
- if (pass == NULL) {
- return (0);
- }
-#ifdef HAVE_PAM_START
- struct pam_conv pc;
- struct appdata data;
- pam_handle_t *ph;
- int i;
-#else
- char *crypted_pwd;
-#ifdef HAVE_GETSPNAM
- struct spwd *sp;
-#endif
-#endif
- struct passwd *pw;
- int retval = 0;
-
- pw = getpwuid(uid);
- if (pw == NULL) {
- return retval;
- }
-#ifdef HAVE_PAM_START
-
-#ifdef PAM_DATA_SILENT
- int flags = PAM_DATA_SILENT;
-#else
- int flags = 0;
-#endif
-
- pc.conv = conv;
- pc.appdata_ptr = &data;
- data.name = pw->pw_name;
- data.pw = pass;
- if (pam_start("citadel", pw->pw_name, &pc, &ph) != PAM_SUCCESS)
- return (0);
-
- if ((i = pam_authenticate(ph, flags)) == PAM_SUCCESS) {
- if ((i = pam_acct_mgmt(ph, flags)) == PAM_SUCCESS) {
- retval = -1;
- }
- }
-
- pam_end(ph, i | flags);
-#else
- crypted_pwd = pw->pw_passwd;
-
-#ifdef HAVE_GETSPNAM
- if (pw == NULL)
- return (0);
- if (pw->pw_name == NULL)
- return (0);
- if ((sp = getspnam(pw->pw_name)) != NULL) {
- crypted_pwd = sp->sp_pwdp;
- }
-#endif
-
- if (!strcmp(crypt(pass, crypted_pwd), crypted_pwd)) {
- retval = -1;
- }
-#endif // HAVE_PAM_START
-
- return retval;
-}
+++ /dev/null
-
-int validate_password(uid_t uid, const char *pass);
+++ /dev/null
-#ifndef AXDEFS
-
-char *axdefs[]={
- "Deleted",
- "New User",
- "Problem User",
- "Local User",
- "Network User",
- "Preferred User",
- "Admin",
- "Admin"
-};
-
-#define AXDEFS 1
-
-#else
-
-extern char *axdefs[];
-
-#endif
-
-
-
-
-#ifndef VIEWDEFS
-
-char *viewdefs[]={
- "Messages",
- "Summary",
- "Address book",
- "Calendar",
- "Tasks"
-};
-
-#define VIEWDEFS 1
-
-#else
-
-extern char *viewdefs[];
-
-#endif
-
#
# run me after checking Citadel out of the source code repository.
-echo ... running aclocal ...
-aclocal -I m4
-
-echo ... running autoconf ...
-autoconf
-
-# If your autoconf version changes, the autom4te.cache stuff will mess you up.
-# Get rid of it.
-echo ... removing autoheader cache files ...
-rm -rf autom4te*.cache
-
-echo ... running autoheader ...
-autoheader
-
echo ... running mk_svn_revision.sh ...
./scripts/mk_svn_revision.sh
-echo ... running mk_module_init.sh ...
-./scripts/mk_module_init.sh
-
grep '#define REV_LEVEL' citadel.h | sed 's/[^0-9]*//g' >package-version.txt
-
-echo
-echo This script has been tested with autoconf 2.53 and
-echo automake 1.5. Other versions may work, but we recommend
-echo the latest echo compatible versions of these.
-echo
-echo Also note that autoconf and automake should be configured
-echo with the same prefix.
-echo
+++ /dev/null
-//
-// Copyright (c) 1987-2022 by the citadel.org team
-//
-// This program is open source software. Use, duplication, or disclosure
-// is subject to the terms of the GNU General Public License, version 3.
-// The program is distributed without any warranty, expressed or implied.
-
-#include <errno.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <pwd.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <string.h>
-#include <limits.h>
-#include <dirent.h>
-
-
-#include "citadel.h"
-#include "sysdep.h"
-#include "citadel_dirs.h"
-/* These pipes are used to talk to the chkpwd daemon, which is forked during startup */
-int chkpwd_write_pipe[2];
-int chkpwd_read_pipe[2];
-
-/*
- * Validate a password on the host unix system by talking to the chkpwd daemon
- */
-static int validpw(uid_t uid, const char *pass)
-{
- char buf[256];
- int rv;
-
- rv = write(chkpwd_write_pipe[1], &uid, sizeof(uid_t));
- if (rv == -1) {
- printf( "Communicatino with chkpwd broken: %s\n", strerror(errno));
- return 0;
- }
-
- rv = write(chkpwd_write_pipe[1], pass, 256);
- if (rv == -1) {
- printf( "Communicatino with chkpwd broken: %s\n", strerror(errno));
- return 0;
- }
- rv = read(chkpwd_read_pipe[0], buf, 4);
- if (rv == -1) {
- printf( "Communicatino with chkpwd broken: %s\n", strerror(errno));
- return 0;
- }
- if (!strncmp(buf, "PASS", 4)) {
- printf("pass\n");
- return(1);
- }
-
- printf("fail\n");
- return 0;
-}
-
-/*
- * Start up the chkpwd daemon so validpw() has something to talk to
- */
-void start_chkpwd_daemon(void) {
- pid_t chkpwd_pid;
- struct stat filestats;
- int i;
-
- printf("Starting chkpwd daemon for host authentication mode\n");
-
- if ((stat(file_chkpwd, &filestats)==-1) ||
- (filestats.st_size==0)){
- printf("didn't find chkpwd daemon in %s: %s\n", file_chkpwd, strerror(errno));
- abort();
- }
- if (pipe(chkpwd_write_pipe) != 0) {
- printf("Unable to create pipe for chkpwd daemon: %s\n", strerror(errno));
- abort();
- }
- if (pipe(chkpwd_read_pipe) != 0) {
- printf("Unable to create pipe for chkpwd daemon: %s\n", strerror(errno));
- abort();
- }
-
- chkpwd_pid = fork();
- if (chkpwd_pid < 0) {
- printf("Unable to fork chkpwd daemon: %s\n", strerror(errno));
- abort();
- }
- if (chkpwd_pid == 0) {
- dup2(chkpwd_write_pipe[0], 0);
- dup2(chkpwd_read_pipe[1], 1);
- for (i=2; i<256; ++i) close(i);
- execl(file_chkpwd, file_chkpwd, NULL);
- printf("Unable to exec chkpwd daemon: %s\n", strerror(errno));
- abort();
- exit(errno);
- }
-}
-
-
-
-int main(int argc, char **argv) {
- char buf[256];
- struct passwd *p;
- int uid;
-
- printf("\n\n ** host auth mode test utility **\n\n");
- start_chkpwd_daemon();
-
- if (getuid() != 0){
- printf("\n\nERROR: you need to be root to run this!\n\n");
- return(1);
- }
- while(1) {
- printf("\n\nUsername: ");
- fgets(buf, sizeof buf, stdin);
- buf[strlen(buf)-1] = 0;
- p = getpwnam(buf);
- if (p == NULL) {
- printf("Not found\n");
- }
- else {
- uid = p->pw_uid;
- printf(" uid: %d\n", uid);
- printf("Password: ");
- fgets(buf, sizeof buf, stdin);
- buf[strlen(buf)-1] = 0;
- validpw(uid, buf);
- }
- }
-
- return(0);
-}
+++ /dev/null
-//
-// a setuid helper program for machines which use shadow passwords
-// by Nathan Bryant, March 1999
-//
-// Copyright (c) 1987-2012 by the citadel.org team
-//
-// This program is open source software. Use, duplication, or disclosure
-// is subject to the terms of the GNU General Public License, version 3.
-// The program is distributed without any warranty, expressed or implied.
-
-#include <pwd.h>
-#include <stdio.h>
-#include <limits.h>
-#include <stdlib.h>
-#include <string.h>
-#include <syslog.h>
-#include <unistd.h>
-#include <sys/types.h>
-
-#include <libcitadel.h>
-
-#include "auth.h"
-#include "config.h"
-#include "citadel_dirs.h"
-#include "citadel.h"
-
-int main(void)
-{
- uid_t uid;
- char buf[SIZ];
-
- while (1) {
- buf[0] = '\0';
- read(0, &uid, sizeof(uid_t)); /* uid */
- read(0, buf, 256); /* password */
-
- if (buf[0] == '\0')
- return (0);
- if (validate_password(uid, buf)) {
- write(1, "PASS", 4);
- }
- else {
- write(1, "FAIL", 4);
- }
- }
-
- return(0);
-}
+++ /dev/null
-#%PAM-1.0
-#
-# /etc/pam.d/citadel: PAM configuration file for Linux-PAM.
-#
-auth include system-auth
-account include system-auth
-session include system-auth
+++ /dev/null
-// This program attempts to act like a local MDA if you're using sendmail or
-// some other non-Citadel MTA. It basically just contacts the Citadel LMTP
-// listener on a unix domain socket and transmits the message. Really though,
-// if your MTA supports LMTP then you definitely should be using that instead.
-//
-// Copyright (c) 1987-2022 by the citadel.org team
-//
-// This program is open source software. Use, duplication, or disclosure
-// is subject to the terms of the GNU General Public License, version 3.
-// The program is distributed without any warranty, expressed or implied.
-
-#include "sysdep.h"
-#include <stdlib.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <signal.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#include <netdb.h>
-#include <string.h>
-#include <pwd.h>
-#include <errno.h>
-#include <stdarg.h>
-#include <limits.h>
-#include <libcitadel.h>
-#include "citadel.h"
-#include "citadel_dirs.h"
-
-int serv_sock;
-int debug = 0;
-
-void strip_trailing_nonprint(char *buf) {
- while ( (!IsEmptyStr(buf)) && (!isprint(buf[strlen(buf) - 1])) ) {
- buf[strlen(buf) - 1] = 0;
- }
-}
-
-
-void timeout(int signum) {
- exit(signum);
-}
-
-
-int uds_connectsock(char *sockpath) {
- int s;
- struct sockaddr_un addr;
-
- memset(&addr, 0, sizeof(addr));
- addr.sun_family = AF_UNIX;
- strcpy(addr.sun_path, sockpath);
-
- s = socket(AF_UNIX, SOCK_STREAM, 0);
- if (s < 0) {
- fprintf(stderr, "citmail: Can't create socket: %s\n",
- strerror(errno));
- exit(3);
- }
-
- if (connect(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
- fprintf(stderr, "citmail: can't connect: %s\n",
- strerror(errno));
- close(s);
- exit(3);
- }
-
- return s;
-}
-
-
-// input binary data from socket
-void serv_read(char *buf, int bytes) {
- int len, rlen;
-
- len = 0;
- while (len < bytes) {
- rlen = read(serv_sock, &buf[len], bytes - len);
- if (rlen < 1) {
- return;
- }
- len = len + rlen;
- }
-}
-
-
-// send binary to server
-void serv_write(char *buf, int nbytes) {
- int bytes_written = 0;
- int retval;
- while (bytes_written < nbytes) {
- retval = write(serv_sock, &buf[bytes_written],
- nbytes - bytes_written);
- if (retval < 1) {
- return;
- }
- bytes_written = bytes_written + retval;
- }
-}
-
-
-// input string from socket - implemented in terms of serv_read()
-void serv_gets(char *buf) {
- int i;
-
- // Read one character at a time.
- for (i = 0;; i++) {
- serv_read(&buf[i], 1);
- if (buf[i] == '\n' || i == (SIZ-1))
- break;
- }
-
- // If we got a long line, discard characters until the newline.
- if (i == (SIZ-1))
- while (buf[i] != '\n')
- serv_read(&buf[i], 1);
-
- // Strip all trailing nonprintables (crlf)
- buf[i] = 0;
- strip_trailing_nonprint(buf);
- if (debug) fprintf(stderr, "> %s\n", buf);
-}
-
-
-// send line to server - implemented in terms of serv_write()
-void serv_puts(char *buf) {
- if (debug) fprintf(stderr, "< %s\n", buf);
- serv_write(buf, strlen(buf));
- serv_write("\n", 1);
-}
-
-
-void cleanup(int exitcode) {
- char buf[1024];
-
- if (exitcode != 0) {
- fprintf(stderr, "citmail: error #%d occurred while sending mail.\n", exitcode);
- fprintf(stderr, "Please check your Citadel configuration.\n");
- }
- serv_puts("QUIT");
- serv_gets(buf);
- exit(exitcode);
-}
-
-
-int main(int argc, char **argv) {
- char buf[1024];
- char fromline[1024];
- FILE *fp;
- int i;
- struct passwd *pw;
- int from_header = 0;
- int in_body = 0;
- char ctdldir[PATH_MAX]=CTDLDIR;
- char *sp, *ep;
- char hostname[256];
- char **recipients = NULL;
- int num_recipients = 0;
- int to_or_cc = 0;
- int read_recipients_from_headers = 0;
- char *add_these_recipients = NULL;
-
- for (i=1; i<argc; ++i) {
- if (!strcmp(argv[i], "-d")) {
- debug = 1;
- }
- else if (!strcmp(argv[i], "-t")) {
- read_recipients_from_headers = 1;
- }
- else if (!strncmp(argv[i], "-h", 2)) {
- safestrncpy(ctdldir, &argv[i][2], sizeof ctdldir);
- }
- else if (argv[i][0] != '-') {
- ++num_recipients;
- recipients = realloc(recipients, (num_recipients * sizeof (char *)));
- recipients[num_recipients - 1] = strdup(argv[i]);
- }
- }
-
- if (chdir(ctdldir) != 0) {
- fprintf(stderr, "sendcommand: %s: %s\n", ctdldir, strerror(errno));
- exit(errno);
- }
-
- pw = getpwuid(getuid());
-
- fp = tmpfile();
- if (fp == NULL) return(errno);
- serv_sock = uds_connectsock(file_lmtp_socket);
- serv_gets(buf);
- if (buf[0] != '2') {
- fprintf(stderr, "%s\n", &buf[4]);
- if (debug) fprintf(stderr, "citmail: could not connect to LMTP socket.\n");
- cleanup(1);
- }
-
- sp = strchr (buf, ' ');
- if (sp == NULL) {
- if (debug) fprintf(stderr, "citmail: could not calculate hostname.\n");
- cleanup(2);
- }
- sp ++;
- ep = strchr (sp, ' ');
- if (ep == NULL) {
- if (debug) fprintf(stderr, "citmail: error parsing hostname\n");
- cleanup(3);
- }
- else
- *ep = '\0';
-
- strncpy(hostname, sp, sizeof hostname);
-
- snprintf(fromline, sizeof fromline, "From: %s@%s", pw->pw_name, hostname);
- while (fgets(buf, 1024, stdin) != NULL) {
- if ( ( (buf[0] == 13) || (buf[0] == 10)) && (in_body == 0) ) {
- in_body = 1;
- if (from_header == 0) {
- fprintf(fp, "%s%s", fromline, buf);
- }
- }
- if (in_body == 0 && !strncasecmp(buf, "From:", 5)) {
- strcpy(fromline, buf);
- from_header = 1;
- }
-
- if (read_recipients_from_headers) {
- add_these_recipients = NULL;
- if ((isspace(buf[0])) && (to_or_cc)) {
- add_these_recipients = buf;
- }
- else {
- if ((!strncasecmp(buf, "To:", 3)) || (!strncasecmp(buf, "Cc:", 3))) {
- to_or_cc = 1;
- }
- else {
- to_or_cc = 0;
- }
- if (to_or_cc) {
- add_these_recipients = &buf[3];
- }
- }
-
- if (add_these_recipients) {
- int num_recp_on_this_line;
- char this_recp[256];
-
- num_recp_on_this_line = num_tokens(add_these_recipients, ',');
- for (i=0; i<num_recp_on_this_line; ++i) {
- extract_token(this_recp, add_these_recipients,
- i, ',', sizeof this_recp);
- striplt(this_recp);
- if (!IsEmptyStr(this_recp)) {
- ++num_recipients;
- recipients = realloc(recipients,
- (num_recipients * sizeof (char *)));
- recipients[num_recipients - 1] = strdup(this_recp);
- }
- }
- }
- }
-
- fprintf(fp, "%s", buf);
- }
- strip_trailing_nonprint(fromline);
-
- sprintf(buf, "LHLO %s", hostname);
- serv_puts(buf);
- do {
- serv_gets(buf);
- strcat(buf, " ");
- } while (buf[3] == '-');
- if (buf[0] != '2') {
- if (debug) fprintf(stderr, "citmail: LHLO command failed\n");
- cleanup(4);
- }
-
- snprintf(buf, sizeof buf, "MAIL %s", fromline);
- serv_puts(buf);
- serv_gets(buf);
- if (buf[0] != '2') {
- if (debug) fprintf(stderr, "citmail: MAIL command failed\n");
- cleanup(5);
- }
-
- for (i=0; i<num_recipients; ++i) {
- snprintf(buf, sizeof buf, "RCPT To: %s", recipients[i]);
- serv_puts(buf);
- serv_gets(buf);
- free(recipients[i]);
- }
- free(recipients);
-
- serv_puts("DATA");
- serv_gets(buf);
- if (buf[0]!='3') {
- if (debug) fprintf(stderr, "citmail: DATA command failed\n");
- cleanup(6);
- }
-
- rewind(fp);
- while (fgets(buf, sizeof buf, fp) != NULL) {
- strip_trailing_nonprint(buf);
- serv_puts(buf);
- }
- serv_puts(".");
- serv_gets(buf);
- if (buf[0] != '2') {
- fprintf(stderr, "%s\n", &buf[4]);
- cleanup(7);
- }
- else {
- cleanup(0);
- }
-
- // We won't actually reach this statement but the compiler will
- // display a spurious warning about an invalid return type if
- // we don't return an int.
- return(0);
-}
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-echo
echo
echo Running the configure script to create config.mk
echo
--prefix)
PREFIX=$v
;;
- --bindir)
- BINDIR=$v
- ;;
--ctdldir)
CTDLDIR=$v
;;
echo $0 : unknown option $k
echo
echo Valid options are:
- echo ' --prefix=PREFIX Install files in PREFIX [/usr/local]'
- echo ' --bindir=DIR Install executables in DIR [PREFIX/bin]'
- echo ' --ctdldir=DIR Look for Citadel server in DIR [/usr/local/citadel]'
+ echo ' --ctdldir=DIR Install Citadel server to DIR [/usr/local/citadel]'
echo ' --with-ssl Force build with OpenSSL support [normally autodetected]'
echo ' --without-ssl Force build without OpenSSL support [normally autodetected]'
exit 1
# Set any missing values (FIXME remove the ultra-fatal -W options when finished converting from autotools)
-[ "$PREFIX" = "" ] && PREFIX=/usr/local/citadel
-[ "$BINDIR" = "" ] && BINDIR=${PREFIX}
-[ "$CTDLDIR" = "" ] && CTDLDIR=${PREFIX}
+# Accept PREFIX as a substitute for CTDLDIR, but only if CTDLDIR is not already set
+[ "$CTDLDIR" = "" ] && [ "$PREFIX" != "" ] && CTDLDIR=$PREFIX
+
+# Configure the directory into which Citadel Server will be installed.
+[ "$CTDLDIR" = "" ] && CTDLDIR=/usr/local/citadel
+
+# Permit override of CFLAGS and LDFLAGS using environment variables
[ "$CFLAGS" = "" ] && CFLAGS='-ggdb -Werror -Wfatal-errors -Wno-discarded-qualifiers'
[ "$LDFLAGS" = "" ] && LDFLAGS=''
# Output the config.mk
(
+ echo # config.mk is generated by configure
+ echo "CTDLDIR := ${CTDLDIR}"
echo "CFLAGS := ${CFLAGS}"
echo "LDFLAGS := ${LDFLAGS}"
- echo "PREFIX := ${PREFIX}"
- echo "BINDIR := ${BINDIR}"
- echo "CTDLDIR := ${CTDLDIR}"
) >config.mk
cat config.mk
+
+
+
+FAIL FAIL FAIL
+
+THIS IS THE OLD CONFIGURE SCRIPT
+
+KEEPING IT HERE FOR REFERENCE AS WE BUILD THE NEW ONE
+
+DONT RUN THIS
+
+
+
+
+
dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.52)
+++ /dev/null
-// Across-the-wire migration utility for Citadel
-//
-// Copyright (c) 2009-2021 citadel.org
-//
-// This program is open source software; you can redistribute it and/or modify
-// it under the terms of the GNU General Public License version 3.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/wait.h>
-#include <signal.h>
-#include <netdb.h>
-#include <errno.h>
-#include <limits.h>
-#include <pwd.h>
-#include <time.h>
-#include <readline/readline.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#include <libcitadel.h>
-#include "citadel.h"
-#include "axdefs.h"
-#include "sysdep.h"
-#include "config.h"
-#include "citadel_dirs.h"
-
-
-// support for getz() -- (globals would not be appropriate in a multithreaded program)
-static int gmaxlen = 0;
-static char *gdeftext = NULL;
-
-
-// support function for getz()
-static int limit_rl(FILE *dummy) {
- if (rl_end > gmaxlen) {
- return '\b';
- }
- return rl_getc(dummy);
-}
-
-
-// support function for getz()
-static int getz_deftext(void) {
- if (gdeftext) {
- rl_insert_text(gdeftext);
- gdeftext = NULL;
- rl_startup_hook = NULL;
- }
- return 0;
-}
-
-
-// Replacement for gets() that uses libreadline.
-void getz(char *buf, int maxlen, char *default_value, char *prompt) {
- rl_startup_hook = getz_deftext;
- rl_getc_function = limit_rl;
- gmaxlen = maxlen;
- gdeftext = default_value;
- strcpy(buf, readline(prompt));
-}
-
-
-// Exit from the program while displaying an error code
-void ctdlmigrate_exit(int cmdexit) {
- printf("\n\n\033[3%dmExit code %d\033[0m\n", (cmdexit ? 1 : 2), cmdexit);
- exit(cmdexit);
-}
-
-
-// Connect to a Citadel on a remote host using a TCP/IP socket
-static int tcp_connectsock(char *host, char *service) {
- struct in6_addr serveraddr;
- struct addrinfo hints;
- struct addrinfo *res = NULL;
- struct addrinfo *ai = NULL;
- int rc = (-1);
- int sock = (-1);
-
- if ((host == NULL) || IsEmptyStr(host)) {
- return(-1);
- }
- if ((service == NULL) || IsEmptyStr(service)) {
- return(-1);
- }
-
- memset(&hints, 0x00, sizeof(hints));
- hints.ai_flags = AI_NUMERICSERV;
- hints.ai_family = AF_UNSPEC;
- hints.ai_socktype = SOCK_STREAM;
-
- // Handle numeric IPv4 and IPv6 addresses
- rc = inet_pton(AF_INET, host, &serveraddr);
- if (rc == 1) { // dotted quad
- hints.ai_family = AF_INET;
- hints.ai_flags |= AI_NUMERICHOST;
- } else {
- rc = inet_pton(AF_INET6, host, &serveraddr);
- if (rc == 1) { // IPv6 address
- hints.ai_family = AF_INET6;
- hints.ai_flags |= AI_NUMERICHOST;
- }
- }
-
- // Begin the connection process
- rc = getaddrinfo(host, service, &hints, &res);
- if (rc != 0) {
- fprintf(stderr, "ctdlmigrate: %s\n", strerror(errno));
- return (-1);
- }
-
- // Try all available addresses until we connect to one or until we run out.
- for (ai = res; ai != NULL; ai = ai->ai_next) {
- sock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol);
- if (sock < 0) {
- fprintf(stderr, "ctdlmigrate: %s\n", strerror(errno));
- return (-1);
- }
-
- rc = connect(sock, ai->ai_addr, ai->ai_addrlen);
- if (rc >= 0) {
- return (sock); // Connected!
- }
- else {
- fprintf(stderr, "ctdlmigrate: %s\n", strerror(errno));
- close(sock); // Failed. Close the socket to avoid fd leak!
- }
- }
- return (-1);
-}
-
-
-// Connect to a Citadel on a remote host using a unix domaion socket
-int uds_connectsock(char *sockpath) {
- int s;
- struct sockaddr_un addr;
-
- memset(&addr, 0, sizeof(addr));
- addr.sun_family = AF_UNIX;
- strcpy(addr.sun_path, sockpath);
-
- s = socket(AF_UNIX, SOCK_STREAM, 0);
- if (s < 0) {
- fprintf(stderr, "ctdlmigrate: Can't create socket: %s\n", strerror(errno));
- return(-1);
- }
-
- if (connect(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
- fprintf(stderr, "ctdlmigrate: can't connect: %s\n", strerror(errno));
- close(s);
- return(-1);
- }
-
- return s;
-}
-
-
-// input binary data from socket
-void serv_read(int serv_sock, char *buf, int bytes) {
- int len = 0;
- int rlen = 0;
-
- while (len < bytes) {
- rlen = read(serv_sock, &buf[len], bytes - len);
- if (rlen < 1) {
- return;
- }
- len = len + rlen;
- }
-}
-
-
-// send binary to server
-void serv_write(int serv_sock, char *buf, int nbytes) {
- int bytes_written = 0;
- int retval;
- while (bytes_written < nbytes) {
- retval = write(serv_sock, &buf[bytes_written], nbytes - bytes_written);
- if (retval < 1) {
- return;
- }
- bytes_written = bytes_written + retval;
- }
-}
-
-
-// input string from socket - implemented in terms of serv_read()
-void serv_gets(int serv_sock, char *buf) {
- int i;
-
- // Read one character at a time.
- for (i = 0;; i++) {
- serv_read(serv_sock, &buf[i], 1);
- if (buf[i] == '\n' || i == (SIZ-1))
- break;
- }
-
- // If we got a long line, discard characters until the newline.
- if (i == (SIZ-1)) {
- while (buf[i] != '\n') {
- serv_read(serv_sock, &buf[i], 1);
- }
- }
-
- // Strip all trailing nonprintables (crlf)
- buf[i] = 0;
-}
-
-
-// send line to server - implemented in terms of serv_write()
-void serv_puts(int serv_sock, char *buf) {
- serv_write(serv_sock, buf, strlen(buf));
- serv_write(serv_sock, "\n", 1);
-}
-
-
-// send formatted printable data to the server
-void serv_printf(int serv_sock, const char *format, ...) {
- va_list arg_ptr;
- char buf[1024];
-
- va_start(arg_ptr, format);
- if (vsnprintf(buf, sizeof buf, format, arg_ptr) == -1)
- buf[sizeof buf - 2] = '\n';
- serv_write(serv_sock, buf, strlen(buf));
- va_end(arg_ptr);
-}
-
-
-// You know what main() does. If you don't, you shouldn't be trying to understand this program.
-int main(int argc, char *argv[]) {
- char ctdldir[PATH_MAX]=CTDLDIR;
- char yesno[2];
- int cmdexit = 0; // when something fails, set cmdexit to nonzero, and skip to the end
- char buf[PATH_MAX];
-
- char remote_user[128];
- char remote_host[128];
- char remote_pass[128];
- char *remote_port = "504";
-
- int linecount = 0;
- int a;
- int remote_server_socket = (-1);
- int local_admin_socket = (-1);
- int progress = 0;
-
- // Parse command line
- while ((a = getopt(argc, argv, "h:")) != EOF) {
- switch (a) {
- case 'h':
- strcpy(ctdldir, optarg);
- break;
- default:
- fprintf(stderr, "ctdlmigrate: usage: ctdlmigrate [-h server_dir]\n");
- return(1);
- }
- }
-
- if (chdir(ctdldir) != 0) {
- fprintf(stderr, "ctdlmigrate: %s: %s\n", ctdldir, strerror(errno));
- exit(errno);
- }
-
- signal(SIGINT, ctdlmigrate_exit);
- signal(SIGQUIT, ctdlmigrate_exit);
- signal(SIGTERM, ctdlmigrate_exit);
- signal(SIGSEGV, ctdlmigrate_exit);
- signal(SIGHUP, ctdlmigrate_exit);
- signal(SIGPIPE, ctdlmigrate_exit);
-
- printf( "\033[2J\033[H\n"
- " \033[32m╔═══════════════════════════════════════════════╗\n"
- " ║ ║\n"
- " ║ \033[33mCitadel over-the-wire migration utility \033[32m║\n"
- " ║ ║\n"
- " ╚═══════════════════════════════════════════════╝\033[0m\n"
- "\n"
- "This utility is designed to migrate your Citadel installation\n"
- "to a new host system via a network connection, without disturbing\n"
- "the source system. The target may be a different CPU architecture\n"
- "and/or operating system. The source system should be running\n"
- "Citadel version \033[33m%d\033[0m or newer, and the target system should be running\n"
- "either the same version or a newer version.\n"
- "\n"
- "You must run this utility on the TARGET SYSTEM. Any existing data\n"
- "on this system will be ERASED. Your target system will be on this\n"
- "host in %s.\n"
- "\n",
- EXPORT_REV_MIN, ctdldir
- );
-
- getz(yesno, 1, NULL, "Do you wish to continue? ");
- puts(yesno);
- if (tolower(yesno[0]) != 'y') {
- cmdexit = 101;
- }
-
- if (!cmdexit) {
- printf( "\033[2J\033[H\n"
- "\033[32m╔═══════════════════════════════════════════════╗\n"
- "║ ║\n"
- "║ \033[33mValidate source and target systems\033[32m ║\n"
- "║ ║\n"
- "╚═══════════════════════════════════════════════╝\033[0m\n"
- "\n\n");
-
- printf("First we must validate that the local target system is running\n");
- printf("and ready to receive data.\n");
- printf("Checking connectivity to Citadel in %s...\n", ctdldir);
- local_admin_socket = uds_connectsock("citadel-admin.socket");
- if (local_admin_socket < 0) {
- cmdexit = 102;
- }
- }
-
- if (!cmdexit) {
- serv_gets(local_admin_socket, buf);
- puts(buf);
- if (buf[0] != '2') {
- cmdexit = 103;
- }
- }
-
- if (!cmdexit) {
- serv_puts(local_admin_socket, "ECHO Connection to Citadel Server succeeded.");
- serv_gets(local_admin_socket, buf);
- puts(buf);
- if (buf[0] != '2') {
- cmdexit = 104;
- }
- }
-
- if (!cmdexit) {
- printf("\n");
- printf("OK, this side is ready to go. Now we must connect to the source system.\n\n");
-
- getz(remote_host, sizeof remote_host, NULL, "Enter the name or IP address of the source system: ");
- getz(remote_user, sizeof remote_user, "admin", " Enter the user name of an administrator account: ");
- getz(remote_pass, sizeof remote_pass, NULL, " Enter the password for this account: ");
-
- remote_server_socket = tcp_connectsock(remote_host, remote_port);
- if (remote_server_socket < 0) {
- cmdexit = 105;
- }
- }
-
- if (!cmdexit) {
- serv_gets(remote_server_socket, buf);
- puts(buf);
- if (buf[0] != '2') {
- cmdexit = 106;
- }
- }
-
- if (!cmdexit) {
- serv_printf(remote_server_socket, "USER %s\n", remote_user);
- serv_gets(remote_server_socket, buf);
- puts(buf);
- if (buf[0] != '3') {
- cmdexit = 107;
- }
- }
-
- if (!cmdexit) {
- serv_printf(remote_server_socket, "PASS %s\n", remote_pass);
- serv_gets(remote_server_socket, buf);
- puts(buf);
- if (buf[0] != '2') {
- cmdexit = 108;
- }
- }
-
- if (!cmdexit) {
- printf( "\033[2J\033[H\n"
- "\033[32m╔═══════════════════════════════════════════════════════════════════╗\n"
- "║ ║\n"
- "║ \033[33mMigrating from: %-50s\033[32m║\n"
- "║ ║\n"
- "╠═══════════════════════════════════════════════════════════════════╣\n"
- "║ ║\n"
- "║ Lines received: 0 Percent complete: 0 ║\n"
- "║ ║\n"
- "╚═══════════════════════════════════════════════════════════════════╝\033[0m\n"
- "\n", remote_host
- );
- }
-
- if (!cmdexit) {
- serv_puts(remote_server_socket, "MIGR export");
- serv_gets(remote_server_socket, buf);
- if (buf[0] != '1') {
- printf("\n\033[31m%s\033[0m\n", buf);
- cmdexit = 109;
- }
- }
-
- if (!cmdexit) {
- serv_puts(local_admin_socket, "MIGR import");
- serv_gets(local_admin_socket, buf);
- if (buf[0] != '4') {
- printf("\n\033[31m%s\033[0m\n", buf);
- cmdexit = 110;
- }
- }
-
- if (!cmdexit) {
- char *ptr;
- time_t last_update = time(NULL);
-
- while (serv_gets(remote_server_socket, buf), strcmp(buf, "000")) {
- ptr = strchr(buf, '\n');
- if (ptr) *ptr = 0; // remove the newline character
- ++linecount;
- if (!strncasecmp(buf, "<progress>", 10)) {
- progress = atoi(&buf[10]);
- printf("\033[8;65H\033[33m%d\033[0m\033[12;0H\n", progress);
- }
- if (time(NULL) != last_update) {
- last_update = time(NULL);
- printf("\033[8;19H\033[33m%d\033[0m\033[12;0H\n", linecount);
- }
- serv_puts(local_admin_socket, buf);
- }
-
- serv_puts(local_admin_socket, "000");
- }
-
- if ( (cmdexit == 0) && (progress < 100) ) {
- printf("\033[31mERROR: source stream ended before 100 percent of data was received.\033[0m\n");
- cmdexit = 111;
- }
-
- if (!cmdexit) {
- printf("\033[36mMigration is complete. Restarting the target server.\033[0m\n");
- serv_puts(local_admin_socket, "DOWN 1");
- serv_gets(local_admin_socket, buf);
- puts(buf);
- printf("\033[36mIt is recommended that you shut down the source server now.\033[0m\n");
- printf("\033[36mRemember to copy over your SSL keys and file libraries if appropriate.\033[0m\n");
- }
-
- close(remote_server_socket);
- close(local_admin_socket);
- ctdlmigrate_exit(cmdexit);
-}
+++ /dev/null
-#!/bin/bash
-
-die () {
- echo Exiting.
- exit 1
-}
-
-DATA_DIR="/usr/local/citadel"
-
-usage() {
- echo "Usage: database_cleanup.sh [ -h citadel_dir ]"
- exit 2
-}
-
-PARSED_ARGUMENTS=$(getopt -a -n database_cleanup.sh -o h: -- "$@")
-VALID_ARGUMENTS=$?
-if [ "$VALID_ARGUMENTS" != "0" ]; then
- usage
-fi
-
-eval set -- "$PARSED_ARGUMENTS"
-while :
-do
- case "$1" in
- -h | --alpha)
- DATA_DIR=${2}
- shift 2
- ;;
- # -- means the end of the arguments; drop this, and break out of the while loop
- --) shift; break ;;
- # If invalid options were passed, then getopt should have reported an error,
- # which we checked as VALID_ARGUMENTS when getopt was called...
- *) echo "Unexpected option: $1 - this should not happen."
- usage
- ;;
- esac
-done
-
-DATA_DIR=$DATA_DIR/data
-
-# If we're on a Docker or Easy Install system, use our own db_ tools.
-if [ -x /usr/local/ctdlsupport/bin/db_dump ] ; then
- export PATH=/usr/local/ctdlsupport/bin:$PATH
- RECOVER=/usr/local/ctdlsupport/bin/db_recover
- DUMP=/usr/local/ctdlsupport/bin/db_dump
- LOAD=/usr/local/ctdlsupport/bin/db_load
-
-# otherwise look in /usr/local
-elif [ -x /usr/local/bin/db_dump ] ; then
- export PATH=/usr/local/bin:$PATH
- RECOVER=/usr/local/bin/db_recover
- DUMP=/usr/local/bin/db_dump
- LOAD=/usr/local/bin/db_load
-
-# usual install
-else
- if test -f /usr/bin/db_dump; then
- RECOVER=/usr/bin/db_recover
- DUMP=/usr/bin/db_dump
- LOAD=/usr/bin/db_load
- else
- if test -n "`ls /usr/bin/db?*recover`"; then
- # seems we have something debian alike thats adding version in the filename
- if test "`ls /usr/bin/db*recover |wc -l`" -gt "1"; then
- echo "Warning: you have more than one version of the Berkeley DB utilities installed." 1>&2
- echo "Using the latest one." 1>&2
- RECOVER=`ls /usr/bin/db*recover |sort |tail -n 1`
- DUMP=`ls /usr/bin/db*dump |sort |tail -n 1`
- LOAD=`ls /usr/bin/db*load |sort |tail -n 1`
- else
- RECOVER=`ls /usr/bin/db*recover`
- DUMP=`ls /usr/bin/db*dump`
- LOAD=`ls /usr/bin/db*load`
- fi
- else
- echo "database_cleanup.sh cannot find the Berkeley DB utilities. Exiting." 1>&2
- die
- fi
-
- fi
-fi
-
-# Ok, let's begin.
-
-clear
-cat <<!
-
-Citadel Database Cleanup
----------------------------
-
-This script exports, deletes, and re-imports your database. If you have
-any data corruption issues, this program may be able to clean them up for you.
-
-Please note that this program does a Berkeley DB dump/load, not a Citadel
-export. The export files are not generated by the Citadel export module.
-
-WARNING #1:
- MAKE A BACKUP OF YOUR DATA BEFORE ATTEMPTING THIS. There is no guarantee
- that this will work (in case of disk full, power failure, program crash)!
-
-WARNING #2:
- citserver must NOT be running while you do this.
-
-WARNING #3:
- Please try "cd $DATA_DIR; $RECOVER -c" first. Run citserver afterwards to
- revalidate whether its fixed or not, No news might be good news. Use this
- tool only if that one fails to fix your problem.
-
-WARNING #4:
- You must have an amount of free space in /tmp that is at least twice
- the size of your database. see the following output:
-
-`df -h`
-
-you will need `du -sh $DATA_DIR|sed "s;/.*;;"` of free space.
-
-!
-
-echo We will attempt to look for a Citadel database in $DATA_DIR
-echo -n "Do you want to continue? "
-
-read yesno
-case "$yesno" in
- "y" | "Y" | "yes" | "YES" | "Yes" )
- echo
- echo DO NOT INTERRUPT THIS PROCESS.
- echo
- ;;
- * )
- exit
-esac
-
-for x in 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
-do
- filename=cdb.$x
- echo Dumping $filename
- $DUMP -h $DATA_DIR $filename >/tmp/CitaDump.$x || {
- echo error $?
- die
- }
- rm -vf $DATA_DIR/$filename
-done
-
-echo Removing old databases
-rm -vf $DATA_DIR/*
-
-for x in 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
-do
- filename=cdb.$x
- echo Loading $filename
- $LOAD -h $DATA_DIR $filename </tmp/CitaDump.$x && {
- rm -f /tmp/CitaDump.$x
- }
-done
-
-echo
-echo Dump/load operation complete. Start your Citadel server now.
-echo
+++ /dev/null
-#!/bin/sh
-
-# guesstimezone.sh - an ugly hack of a script to try to guess the time
-# zone currently in use on the host system, and output its name.
-
-# Copyright (c) by Art Cancro
-
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the Free
-# Software Foundation; either version 3 of the License, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 675 Mass Ave, Cambridge, MA 02139, USA.
-
-convert_timezone()
-{
- case "$1" in
- (right/*|posix/*)
- convert_timezone "${1#*/}"
- ;;
- ("Africa/Asmera")
- echo "Africa/Asmara"
- ;;
- ("America/Argentina/ComodRivadavia"|"America/Catamarca")
- echo "America/Argentina/Catamarca"
- ;;
- ("America/Buenos_Aires")
- echo "America/Argentina/Buenos_Aires"
- ;;
- ("America/Cordoba"|"America/Rosario")
- echo "America/Argentina/Cordoba"
- ;;
- ("America/Jujuy")
- echo "America/Argentina/Jujuy"
- ;;
- ("America/Mendoza")
- echo "America/Argentina/Mendoza"
- ;;
- ("Antarctica/South_Pole")
- echo "Antarctica/McMurdo"
- ;;
- "Asia/Ashkhabad")
- echo "Asia/Ashgabat"
- ;;
- ("Asia/Calcutta")
- echo "Asia/Kolkata"
- ;;
- "Asia/Chungking")
- echo "Asia/Chongqing"
- ;;
- "Asia/Dacca")
- echo "Asia/Dhaka"
- ;;
- ("Asia/Katmandu")
- echo "Asia/Kathmandu"
- ;;
- "Asia/Macao")
- echo "Asia/Macau"
- ;;
- ("Asia/Saigon")
- echo "Asia/Ho_Chi_Minh"
- ;;
- "Asia/Thimbu")
- echo "Asia/Thimphu"
- ;;
- "Asia/Ulan_Bator")
- echo "Asia/Ulaanbaatar"
- ;;
- "Atlantic/Faeroe")
- echo "Atlantic/Faroe"
- ;;
- "Australia/ACT" | "Australia/NSW")
- echo "Australia/Sydney"
- ;;
- "Australia/LHI")
- echo "Australia/Lord_Howe"
- ;;
- "Australia/North")
- echo "Australia/Darwin"
- ;;
- "Australia/Queensland")
- echo "Australia/Brisbane"
- ;;
- "Australia/South")
- echo "Australia/Adelaide"
- ;;
- "Australia/Tasmania")
- echo "Australia/Hobart"
- ;;
- "Australia/Victoria")
- echo "Australia/Melbourne"
- ;;
- "Australia/West")
- echo "Australia/Perth"
- ;;
- "Brazil/Acre")
- echo "America/Rio_Branco"
- ;;
- "Brazil/DeNoronha")
- echo "America/Noronha"
- ;;
- "Brazil/East")
- echo "America/Sao_Paulo"
- ;;
- "Brazil/West")
- echo "America/Manaus"
- ;;
- "Canada/Atlantic")
- echo "America/Halifax"
- ;;
- "Canada/Central")
- echo "America/Winnipeg"
- ;;
- "Canada/East-Saskatchewan")
- echo "America/Regina"
- ;;
- "Canada/Eastern")
- echo "America/Toronto"
- ;;
- "Canada/Mountain")
- echo "America/Edmonton"
- ;;
- "Canada/Newfoundland")
- echo "America/St_Johns"
- ;;
- "Canada/Pacific")
- echo "America/Vancouver"
- ;;
- "Canada/Saskatchewan")
- echo "America/Regina"
- ;;
- "Canada/Yukon")
- echo "America/Whitehorse"
- ;;
- "CET")
- echo "Europe/Paris"
- ;;
- "Chile/Continental")
- echo "America/Santiago"
- ;;
- "Chile/EasterIsland")
- echo "Pacific/Easter"
- ;;
- "CST6CDT")
- echo "SystemV/CST6CDT"
- ;;
- "Cuba")
- echo "America/Havana"
- ;;
- "EET")
- echo "Europe/Helsinki"
- ;;
- "Egypt")
- echo "Africa/Cairo"
- ;;
- "Eire")
- echo "Europe/Dublin"
- ;;
- "EST")
- echo "SystemV/EST5"
- ;;
- "EST5EDT")
- echo "SystemV/EST5EDT"
- ;;
- "GB")
- echo "Europe/London"
- ;;
- "GB-Eire")
- echo "Europe/London"
- ;;
- "GMT")
- echo "Etc/GMT"
- ;;
- "GMT0")
- echo "Etc/GMT0"
- ;;
- "GMT-0")
- echo "Etc/GMT-0"
- ;;
- "GMT+0")
- echo "Etc/GMT+0"
- ;;
- "Greenwich")
- echo "Etc/Greenwich"
- ;;
- "Hongkong")
- echo "Asia/Hong_Kong"
- ;;
- "HST")
- echo "Pacific/Honolulu"
- ;;
- "Iceland")
- echo "Atlantic/Reykjavik"
- ;;
- "Iran")
- echo "Asia/Tehran"
- ;;
- "Israel")
- echo "Asia/Tel_Aviv"
- ;;
- "Jamaica")
- echo "America/Jamaica"
- ;;
- "Japan")
- echo "Asia/Tokyo"
- ;;
- "Kwajalein")
- echo "Pacific/Kwajalein"
- ;;
- "Libya")
- echo "Africa/Tripoli"
- ;;
- "MET")
- echo "Europe/Paris"
- ;;
- "Mexico/BajaNorte")
- echo "America/Tijuana"
- ;;
- "Mexico/BajaSur")
- echo "America/Mazatlan"
- ;;
- "Mexico/General")
- echo "America/Mexico_City"
- ;;
- "Mideast/Riyadh87")
- echo "Asia/Riyadh87"
- ;;
- "Mideast/Riyadh88")
- echo "Asia/Riyadh88"
- ;;
- "Mideast/Riyadh89")
- echo "Asia/Riyadh89"
- ;;
- "MST")
- echo "SystemV/MST7"
- ;;
- "MST7MDT")
- echo "SystemV/MST7MDT"
- ;;
- "Navajo")
- echo "America/Denver"
- ;;
- "NZ")
- echo "Pacific/Auckland"
- ;;
- "NZ-CHAT")
- echo "Pacific/Chatham"
- ;;
- "Poland")
- echo "Europe/Warsaw"
- ;;
- "Portugal")
- echo "Europe/Lisbon"
- ;;
- "PRC")
- echo "Asia/Shanghai"
- ;;
- "PST8PDT")
- echo "SystemV/PST8PDT"
- ;;
- "ROC")
- echo "Asia/Taipei"
- ;;
- "ROK")
- echo "Asia/Seoul"
- ;;
- "Singapore")
- echo "Asia/Singapore"
- ;;
- "Turkey")
- echo "Europe/Istanbul"
- ;;
- "UCT")
- echo "Etc/UCT"
- ;;
- "Universal")
- echo "Etc/UTC"
- ;;
- "US/Alaska")
- echo "America/Anchorage"
- ;;
- "US/Aleutian")
- echo "America/Adak"
- ;;
- "US/Arizona")
- echo "America/Phoenix"
- ;;
- "US/Central")
- echo "America/Chicago"
- ;;
- "US/East-Indiana")
- echo "America/Indianapolis"
- ;;
- "US/Eastern")
- echo "America/New_York"
- ;;
- "US/Hawaii")
- echo "Pacific/Honolulu"
- ;;
- "US/Indiana-Starke")
- echo "America/Indianapolis"
- ;;
- "US/Michigan")
- echo "America/Detroit"
- ;;
- "US/Mountain")
- echo "America/Denver"
- ;;
- "US/Pacific")
- echo "America/Los_Angeles"
- ;;
- "US/Samoa")
- echo "Pacific/Pago_Pago"
- ;;
- "UTC")
- echo "Etc/UTC"
- ;;
- "WET")
- echo "Europe/Lisbon"
- ;;
- "W-SU")
- echo "Europe/Moscow"
- ;;
- "Zulu")
- echo "Etc/UTC"
- ;;
- *)
- echo "$1"
- ;;
- esac
-}
-
-md5sum </dev/null >/dev/null 2>/dev/null || exit 1
-
-# this check will find the timezone if /etc/localtime is a link to the right timezone file
-# or that file has been copied to /etc/localtime and not changed afterwards
-LOCALTIMESUM=`md5sum /etc/localtime | awk ' { print $1 } ' 2>/dev/null`
-find /usr/share/zoneinfo -type f -print | while read filename
-do
- THISTIMESUM=`md5sum $filename | awk ' { print $1 } '`
- if [ $LOCALTIMESUM = $THISTIMESUM ] ; then
- echo $filename | cut -c21-
- exit 0
- fi
-done 2>/dev/null
-
-# seems we haven't found the timezone yet, let's see whether /etc/timezone has some info
-
-if [ -e /etc/timezone ]; then
- TIMEZONE="$(head -n 1 /etc/timezone)"
- TIMEZONE="${TIMEZONE%% *}"
- TIMEZONE="${TIMEZONE##/}"
- TIMEZONE="${TIMEZONE%%/}"
- TIMEZONE="$(convert_timezone $TIMEZONE)"
- if [ -f "/usr/share/zoneinfo/$TIMEZONE" ] ; then
- echo $TIMEZONE
- exit 0
- fi
-fi
-
-exit 2
+++ /dev/null
-#! /bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- else
- instcmd=mkdir
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
+++ /dev/null
-void LoadInternetConfig(void);
-int IsHostLocal(char *WhichHost);
+++ /dev/null
-# Check if "struct ucred" is available. If not, try harder with
-# _GNU_SOURCE.
-#
-# heavily inspired by: http://git.musicpd.org/cgit/master/mpd.git/tree/m4/ucred.m4
-# Author: Max Kellermann <max@duempel.org>
-
-AC_DEFUN([STRUCT_UCRED],[
- AC_MSG_CHECKING([for struct ucred])
- AC_CACHE_VAL(mpd_cv_have_struct_ucred, [
- AC_TRY_COMPILE([#include <sys/socket.h>],
- [struct ucred cred;],
- mpd_cv_have_struct_ucred=yes,
- mpd_cv_have_struct_ucred=no)
- if test x$mpd_cv_have_struct_ucred = xno; then
- # glibc 2.8 forces _GNU_SOURCE on us
- AC_TRY_COMPILE(
- [#define _GNU_SOURCE
- #include <sys/socket.h>],
- [struct ucred cred;],
- mpd_cv_have_struct_ucred=yes,
- mpd_cv_have_struct_ucred=no)
- if test x$mpd_cv_have_struct_ucred = xyes; then
- # :(
- MPD_CFLAGS="$MPD_CFLAGS -D_GNU_SOURCE"
- fi
- fi
- ])
-
- AC_MSG_RESULT($mpd_cv_have_struct_ucred)
- if test x$mpd_cv_have_struct_ucred = xyes; then
- AC_DEFINE(HAVE_STRUCT_UCRED, 1, [Define if struct ucred is present from sys/socket.h])
- fi
-])
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-
-CITDIR=`pwd`
-OUTDIR=${CITDIR}/../../coverage/citadel
-ln -s parsedate.c y.tab.c
-
-# if we call citserver with ./citserver, we don't need these:
-#cd ${CITDIR}/utillib/; ln -s . utillib; cd ..
-#cd ${CITDIR}/modules
-#for i in *; do cd $CITDIR/modules/$i; ln -s . modules; ln -s . $i; ln -s ../../user_ops.h .; done
-
-cd ${CITDIR}
-
-mkdir -p ${OUTDIR}
-lcov --base-directory ${CITDIR} --directory . --capture --output-file ${OUTDIR}/citadel.info $@
-genhtml --output-directory ${OUTDIR} ${OUTDIR}/citadel.info
-
-
-
-#exit
-#rm y.tab.c
-
-find -type l -exec rm {} \;
-rm -f .#user_ops.h.gcov
\ No newline at end of file
+++ /dev/null
-#!/bin/sh
-#
-# Script to generate $C_FILE
-#
-
-ECHO=/usr/bin/printf
-SED=/usr/bin/sed
-
-#MINUS_e=X`$ECHO -n -e`
-#if [ $MINUS_e != "X" ] ; then
-# MINUS_e=""
-#else
-# MINUS_e="-e"
-#fi
-
-#MINUS_E=X`$ECHO -n -E`
-#if [ $MINUS_E != "X" ] ; then
-# MINUS_E=""
-#else
-# MINUS_E="-E"
-#fi
-
-
-CUR_DIR=`pwd`
-C_FILE="$CUR_DIR/modules_init.c"
-H_FILE="$CUR_DIR/modules_init.h"
-MOD_FILE="$CUR_DIR/Make_modules"
-SRC_FILE="$CUR_DIR/Make_sources"
-U_FILE="$CUR_DIR/modules_upgrade.c"
-
-/usr/bin/printf "Scanning extension modules for entry points.\n"
-
-STATIC_FIRST_MODULES="control modules euidindex msgbase database"
-DYNAMIC_MODULES=`grep CTDL_MODULE_INIT modules/*/*.c |$SED 's;.*(\(.*\));\1;'`
-if test -d user_modules; then
- USER_MODULES=`grep CTDL_MODULE_INIT user_modules/*/*.c |$SED 's;.*(\(.*\));\1;'`
-else
- USER_MODULES=
-fi
-STATIC_LAST_MODULES="netconfig"
-
-###############################################################################
-# start the c file #
-###############################################################################
-
-cat <<EOF >$C_FILE
-/*
- * $C_FILE
- * Auto generated by mk_modules_init.sh DO NOT EDIT THIS FILE
- */
-
-
-
-#include "sysdep.h"
-#include <stdlib.h>
-#include <time.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <unistd.h>
-#include <libcitadel.h>
-#include "citadel.h"
-#include "modules_init.h"
-#include "sysdep_decls.h"
-#include "serv_extensions.h"
-
-
-void LogPrintMessages(long err);
-extern long DetailErrorFlags;
-
-void initialise_modules (int threading)
-{
- long filter;
- const char *pMod;
-
- syslog(LOG_DEBUG, "modules: initializing, CtdlThreads %s", (threading ? "enabled" : "not yet enabled"));
-
-EOF
-
-
-for i in ${STATIC_FIRST_MODULES} ${DYNAMIC_MODULES} ${USER_MODULES} ${STATIC_LAST_MODULES}; do
-cat <<EOF >> $C_FILE
- pMod = CTDL_INIT_CALL($i);
- syslog(LOG_DEBUG, "modules: loaded %s", pMod);
-EOF
-
-done
-cat <<EOF >> $C_FILE
-
- for (filter = 1; filter != 0; filter = filter << 1)
- if ((filter & DetailErrorFlags) != 0)
- LogPrintMessages(filter);
-}
-
-EOF
-
-
-
-
-
-###############################################################################
-# start the header file #
-###############################################################################
-cat <<EOF > $H_FILE
-/*
- * $H_FILE
- * Auto generated by mk_modules_init.sh DO NOT EDIT THIS FILE
- */
-
-
-#ifndef MODULES_INIT_H
-#define MODULES_INIT_H
-#include "ctdl_module.h"
-extern size_t nSizErrmsg;
-void initialise_modules (int threading);
-void upgrade_modules(void);
-
-EOF
-
-for i in ${STATIC_FIRST_MODULES} ${DYNAMIC_MODULES} ${USER_MODULES} ${STATIC_LAST_MODULES}; do
-# Add this entry point to the .h file
-cat <<EOF >> $H_FILE
- CTDL_MODULE_INIT($i);
-EOF
-done
-
-grep CTDL_MODULE_UPGRADE *.c modules/*/*.c |$SED 's;.*(\(.*\));\CTDL_MODULE_UPGRADE(\1)\;\n;' >> $H_FILE
-
-cat <<EOF >> $H_FILE
-
-
-#endif /* MODULES_INIT_H */
-
-EOF
-
-
-###############################################################################
-# u start the Makefile included file for $SERV_MODULES #
-###############################################################################
-cat <<EOF >$MOD_FILE
-#
-# Make_modules
-# This file is to be included by Makefile to dynamically add modules to the build process
-# THIS FILE WAS AUTO GENERATED BY mk_modules_init.sh DO NOT EDIT THIS FILE
-#
-
-SERV_MODULES = \\
-EOF
-
-echo modules/*/*.c | $SED -e "s;\.c ;.o \\\\\n;g" -e "s;\.c;.o;" >> $MOD_FILE
-echo >> $MOD_FILE
-
-
-###############################################################################
-# start of the files which inturn removes any existing file #
-###############################################################################
-
-
-# start the Makefile included file for $SOURCES
-cat <<EOF >$SRC_FILE
-#
-# Make_sources
-# This file is to be included by Makefile to dynamically add modules to the build process
-# THIS FILE WAS AUTO GENERATED BY mk_modules_init.sh DO NOT EDIT THIS FILE
-#
-
-SOURCES = \\
-EOF
-
-echo modules/*/*.c | $SED "s;\.c ;.c \\\\\n;g" >> $SRC_FILE
-echo >> $SRC_FILE
-
-
-
-###############################################################################
-# start the upgrade file #
-###############################################################################
-cat <<EOF >$U_FILE
-/*
- * $U_FILE
- * Auto generated by mk_modules_init.sh DO NOT EDIT THIS FILE
- */
-
-
-
-#include "sysdep.h"
-#include <stdlib.h>
-#include <unistd.h>
-#include <time.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <unistd.h>
-#include <libcitadel.h>
-#include "citadel.h"
-#include "modules_init.h"
-#include "sysdep_decls.h"
-#include "serv_extensions.h"
-
-
-
-void upgrade_modules (void)
-{
- const char *pMod;
-
- syslog(LOG_INFO, "modules: upgrading.");
-
-EOF
-
-# Add this entry point to the .c file
-
-grep CTDL_MODULE_UPGRADE *.c modules/*/*.c |$SED 's;.*(\(.*\));\tpMod = CTDL_UPGRADE_CALL(\1)\;\n\tsyslog(LOG_INFO, "modules: %s\\n", pMod)\;\n;' >> $U_FILE
-
-#close the upgrade file
-/usr/bin/printf "}\n" >> $U_FILE
+++ /dev/null
-{
- blargtest ion_name_here
- Memcheck:Cond
- obj:/lib/libc-2.11.2.so
- fun:ERR_load_ERR_strings
- fun:ERR_load_crypto_strings
- fun:SSL_load_error_strings
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- obj:/lib/libc-2.11.2.so
- fun:ERR_load_ERR_strings
- fun:ERR_load_crypto_strings
- fun:SSL_load_error_strings
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- fun:__GI_strlen
- obj:/usr/lib/libcrypto.so.0.9.8
- fun:BIO_gets
- fun:PEM_read_bio
- fun:PEM_bytes_read_bio
- fun:PEM_ASN1_read_bio
- fun:SSL_CTX_use_certificate_chain_file
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- fun:PEM_read_bio
- fun:PEM_bytes_read_bio
- fun:PEM_ASN1_read_bio
- fun:SSL_CTX_use_certificate_chain_file
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-
-
-
-
-
-
-
-
-
-{
- some openssl initializationshit
- Memcheck:Cond
- ...
- fun:SSL_load_error_strings
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-{
- some openssl shit
- Memcheck:Value8
- ...
- fun:SSL_load_error_strings
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-# obj:/lib/libc-*
-
-{
- more openssl library shit
- Memcheck:Leak
- ...
- fun:SSL_library_init
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-
-{
- more openssl library shit
- Memcheck:Cond
- ...
- fun:SSL_CTX_use_certificate_chain_file
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-{
- more openssl library shit
- Memcheck:Cond
- ...
- fun:SSL_CTX_use_PrivateKey_file
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-{
- more openssl library shit
- Memcheck:Value8
- ...
- fun:SSL_CTX_use_PrivateKey_file
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- ...
- fun:SSL_CTX_use_certificate_chain_file
- fun:init_ssl
- fun:init_sysdep
- fun:main
-}
-
-
-
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- ...
- fun:_dl_start
- obj:/lib/ld-2.11.2.so
- obj:*
- obj:*
- obj:*
-}
-
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- ...
- fun:dl_main
- fun:_dl_sysdep_start
- fun:_dl_start
- obj:/lib/ld-2.11.2.so
- obj:*
- obj:*
-}
-
-{
- <insert_a_suppression_name_here>
- Memcheck:Addr8
- ...
- fun:__env_open
- fun:open_databases
- fun:master_startup
- fun:main
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- ...
- fun:__env_open
- fun:open_databases
- fun:master_startup
- fun:main
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- ...
- fun:__env_open
- fun:open_databases
- fun:master_startup
- fun:main
-}
-
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- ...
- fun:__env_open
- fun:open_databases
- fun:master_startup
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- ...
- fun:__db_open_pp
- fun:open_databases
- fun:master_startup
- fun:main
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- ...
- fun:__env_open
- fun:open_databases
- fun:master_startup
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- ...
- fun:__db_open_pp
- fun:open_databases
- fun:master_startup
- fun:main
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- ...
- fun:__db_open_pp
- fun:open_databases
- fun:master_startup
- fun:main
-}
-
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- ...
- fun:__db_open_pp
- fun:open_databases
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- ...
- fun:__db_open_pp
- fun:open_databases
- fun:master_startup
-}
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- ...
- fun:__db_open_pp
- fun:open_databases
-}
-
-
-
-{
- <insert_a_suppression_name_here>
- Memcheck:Value8
- fun:CtdlRegisterServiceHook
- ...
-}
-
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- fun:__GI_strlen
- fun:CtdlRegisterServiceHook
- ...
-}
-
-
-
-
-
-# close
-{
- <insert_a_suppression_name_here>
- Memcheck:Cond
- ...
- fun:close_databases
- fun:master_cleanup
- fun:main
-}
+++ /dev/null
-/*
- * Command-line utility to transmit a server command.
- *
- * Copyright (c) 1987-2021 by the citadel.org team
- *
- * This program is open source software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <string.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <signal.h>
-#include <errno.h>
-#include <limits.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#include "citadel.h"
-#include "citadel_dirs.h"
-#include <libcitadel.h>
-
-int serv_sock = (-1);
-
-int uds_connectsock(char *sockpath) {
- int s;
- struct sockaddr_un addr;
-
- memset(&addr, 0, sizeof(addr));
- addr.sun_family = AF_UNIX;
- strncpy(addr.sun_path, sockpath, sizeof addr.sun_path);
-
- s = socket(AF_UNIX, SOCK_STREAM, 0);
- if (s < 0) {
- fprintf(stderr, "sendcommand: Can't create socket: %s\n", strerror(errno));
- exit(3);
- }
-
- if (connect(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
- fprintf(stderr, "sendcommand: can't connect: %s\n", strerror(errno));
- close(s);
- exit(3);
- }
-
- return s;
-}
-
-
-/*
- * input binary data from socket
- */
-void serv_read(char *buf, int bytes) {
- int len, rlen;
-
- len = 0;
- while (len < bytes) {
- rlen = read(serv_sock, &buf[len], bytes - len);
- if (rlen < 1) {
- return;
- }
- len = len + rlen;
- }
-}
-
-
-/*
- * send binary to server
- */
-void serv_write(char *buf, int nbytes) {
- int bytes_written = 0;
- int retval;
- while (bytes_written < nbytes) {
- retval = write(serv_sock, &buf[bytes_written], nbytes - bytes_written);
- if (retval < 1) {
- return;
- }
- bytes_written = bytes_written + retval;
- }
-}
-
-
-/*
- * input string from socket - implemented in terms of serv_read()
- */
-void serv_gets(char *buf) {
- int i;
-
- /* Read one character at a time.
- */
- for (i = 0;; i++) {
- serv_read(&buf[i], 1);
- if (buf[i] == '\n' || i == (SIZ-1))
- break;
- }
-
- /* If we got a long line, discard characters until the newline.
- */
- if (i == (SIZ-1)) {
- while (buf[i] != '\n') {
- serv_read(&buf[i], 1);
- }
- }
-
- /* Strip all trailing nonprintables (crlf)
- */
- buf[i] = 0;
-}
-
-
-/*
- * send line to server - implemented in terms of serv_write()
- */
-void serv_puts(char *buf) {
- serv_write(buf, strlen(buf));
- serv_write("\n", 1);
-}
-
-
-/*
- * Main loop. Do things and have fun.
- */
-int main(int argc, char **argv) {
- int a;
- int watchdog = 60;
- char buf[SIZ];
- int xfermode = 0;
- char ctdldir[PATH_MAX]=CTDLDIR;
-
- /* Parse command line */
- while ((a = getopt(argc, argv, "h:w:")) != EOF) {
- switch (a) {
- case 'h':
- strncpy(ctdldir, optarg, sizeof ctdldir);
- break;
- case 'w':
- watchdog = atoi(optarg);
- break;
- default:
- fprintf(stderr, "sendcommand: usage: sendcommand [-h server_dir] [-w watchdog_timeout]\n");
- return(1);
- }
- }
-
- fprintf(stderr, "sendcommand: started (pid=%d) connecting to Citadel server with data directory %s\n",
- (int) getpid(),
- ctdldir
- );
- fflush(stderr);
-
- if (chdir(ctdldir) != 0) {
- fprintf(stderr, "sendcommand: %s: %s\n", ctdldir, strerror(errno));
- exit(errno);
- }
-
- alarm(watchdog);
- serv_sock = uds_connectsock(file_citadel_admin_socket);
- serv_gets(buf);
- fprintf(stderr, "%s\n", buf);
-
- strcpy(buf, "");
- for (a=optind; a<argc; ++a) {
- if (a != optind) {
- strcat(buf, " ");
- }
- strcat(buf, argv[a]);
- }
-
- fprintf(stderr, "%s\n", buf);
- serv_puts(buf);
- serv_gets(buf);
- fprintf(stderr, "%s\n", buf);
-
- xfermode = buf[0];
-
- if ((xfermode == '4') || (xfermode == '8')) { /* send text */
- while (fgets(buf, sizeof buf, stdin) > 0) {
- if (buf[strlen(buf)-1] == '\n') {
- buf[strlen(buf)-1] = 0;
- }
- serv_puts(buf);
- }
- serv_puts("000");
- }
-
- if ((xfermode == '1') || (xfermode == '8')) { /* receive text */
- while(serv_gets(buf), strcmp(buf, "000")) {
- printf("%s\n", buf);
- }
- }
-
- if (xfermode == '6') { /* receive binary */
- size_t len = atoi(&buf[4]);
- size_t bytes_remaining = len;
-
- while (bytes_remaining > 0) {
- size_t this_block = bytes_remaining;
- if (this_block > SIZ) this_block = SIZ;
- serv_read(buf, this_block);
- fwrite(buf, this_block, 1, stdout);
- bytes_remaining -= this_block;
- }
- }
-
- close(serv_sock);
- alarm(0); /* cancel the watchdog timer */
-
- fprintf(stderr, "sendcommand: processing ended.\n");
- if (xfermode == '5') {
- return(1);
- }
- return(0);
-}
+++ /dev/null
-/*
- * Citadel setup utility
- *
- * Copyright (c) 1987-2021 by the citadel.org team
- *
- * This program is open source software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 3.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define SHOW_ME_VAPPEND_PRINTF
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/wait.h>
-#include <signal.h>
-#include <netdb.h>
-#include <errno.h>
-#include <limits.h>
-#include <pwd.h>
-#include <time.h>
-#include <sys/socket.h>
-#include <sys/un.h>
-#include <assert.h>
-#include <libcitadel.h>
-#include "citadel.h"
-#include "axdefs.h"
-#include "sysdep.h"
-#include "citadel_dirs.h"
-
-#ifdef ENABLE_NLS
-#ifdef HAVE_XLOCALE_H
-#include <xlocale.h>
-#endif
-#include <libintl.h>
-#include <locale.h>
-#define _(string) gettext(string)
-#else
-#define _(string) (string)
-#endif
-
-#define SERVICE_NAME "citadel"
-#define PROTO_NAME "tcp"
-#define NSSCONF "/etc/nsswitch.conf"
-
-typedef enum _SetupStep {
- eCitadelHomeDir = 0,
- eSysAdminName = 1,
- eSysAdminPW = 2,
- eUID = 3,
- eIP_ADDR = 4,
- eCTDL_Port = 5,
- eAuthType = 6,
- eLDAP_Host = 7,
- eLDAP_Port = 8,
- eLDAP_Base_DN = 9,
- eLDAP_Bind_DN = 10,
- eLDAP_Bind_PW = 11,
- eMaxQuestions = 12
-} eSetupStep;
-
-///"CREATE_XINETD_ENTRY";
-/* Environment variables, don't translate! */
-const char *EnvNames [eMaxQuestions] = {
- "HOME_DIRECTORY",
- "SYSADMIN_NAME",
- "SYSADMIN_PW",
- "CITADEL_UID",
- "IP_ADDR",
- "CITADEL_PORT",
- "ENABLE_UNIX_AUTH",
- "LDAP_HOST",
- "LDAP_PORT",
- "LDAP_BASE_DN",
- "LDAP_BIND_DN",
- "LDAP_BIND_PW"
-};
-
-int setup_type = (-1);
-int enable_home = 1;
-char admin_name[SIZ];
-char admin_pass[SIZ];
-char admin_cmd[SIZ];
-int serv_sock = (-1) ;
-
-const char *setup_titles[eMaxQuestions];
-const char *setup_text[eMaxQuestions];
-
-char *program_title;
-
-void SetTitles(void)
-{
- int have_run_dir;
-#ifndef HAVE_RUN_DIR
- have_run_dir = 1;
-#else
- have_run_dir = 0;
-#endif
-
-#ifdef ENABLE_NLS
- setlocale(LC_MESSAGES, getenv("LANG"));
- bindtextdomain("citadel-setup", LOCALEDIR"/locale");
- textdomain("citadel-setup");
- bind_textdomain_codeset("citadel-setup","UTF8");
-#endif
-
- setup_titles[eCitadelHomeDir] = _("Citadel Home Directory");
- if (have_run_dir)
- setup_text[eCitadelHomeDir] = _(
-"Enter the full pathname of the directory in which the Citadel\n"
-"installation you are creating or updating resides. If you\n"
-"specify a directory other than the default, you will need to\n"
-"specify the -h flag to the server when you start it up.\n");
- else
- setup_text[eCitadelHomeDir] = _(
-"Enter the subdirectory name for an alternate installation of "
-"Citadel. To do a default installation just leave it blank."
-"If you specify a directory other than the default, you will need to\n"
-"specify the -h flag to the server when you start it up.\n"
-"note that it may not have a leading /");
-
- setup_titles[eSysAdminName] = _("Citadel administrator username:");
- setup_text[eSysAdminName] = _(
-"Please enter the name of the Citadel user account that should be granted "
-"administrative privileges once created. If using internal authentication "
-"this user account will be created if it does not exist. For external "
-"authentication this user account has to exist.");
-
- setup_titles[eSysAdminPW] = _("Administrator password:");
- setup_text[eSysAdminPW] = _(
-"Enter a password for the system administrator. When setup\n"
-"completes it will attempt to create the administrator user\n"
-"and set the password specified here.\n");
-
- setup_titles[eUID] = _("Citadel User ID:");
- setup_text[eUID] = _(
-"Citadel needs to run under its own user ID. This would\n"
-"typically be called \"citadel\", but if you are running Citadel\n"
-"as a public site, you might also call it \"bbs\" or \"guest\".\n"
-"The server will run under this user ID. Please specify that\n"
-"user ID here. You may specify either a user name or a numeric\n"
-"UID.\n");
-
- setup_titles[eIP_ADDR] = _("Listening address for the Citadel server:");
- setup_text[eIP_ADDR] = _(
-"Please specify the IP address which the server should be listening to. "
-"You can name a specific IPv4 or IPv6 address, or you can specify\n"
-"\"*\" for \"any address\", \"::\" for \"any IPv6 address\", or \"0.0.0.0\"\n"
-"for \"any IPv4 address\". If you leave this blank, Citadel will\n"
-"listen on all addresses. "
-"This can usually be left to the default unless multiple instances of Citadel "
-"are running on the same computer.");
-
- setup_titles[eCTDL_Port] = _("Server port number:");
- setup_text[eCTDL_Port] = _(
-"Specify the TCP port number on which your server will run.\n"
-"Normally, this will be port 504, which is the official port\n"
-"assigned by the IANA for Citadel servers. You will only need\n"
-"to specify a different port number if you run multiple instances\n"
-"of Citadel on the same computer and there is something else\n"
-"already using port 504.\n");
-
- setup_titles[eAuthType] = _("Authentication method to use:");
- setup_text[eAuthType] = _(
-"Please choose the user authentication mode. By default Citadel will use its "
-"own internal user accounts database. If you choose Host, Citadel users will "
-"have accounts on the host system, authenticated via /etc/passwd or a PAM "
-"source. LDAP chooses an RFC 2307 compliant directory server, the last option "
-"chooses the nonstandard MS Active Directory LDAP scheme."
-"\n"
-"Do not change this option unless you are sure it is required, since changing "
-"back requires a full reinstall of Citadel."
-"\n"
-" 0. Self contained authentication\n"
-" 1. Host system integrated authentication\n"
-" 2. External LDAP - RFC 2307 POSIX schema\n"
-" 3. External LDAP - MS Active Directory schema\n"
-"\n"
-"For help: http://www.citadel.org/doku.php/faq:installation:authmodes\n"
-"\n"
-"ANSWER \"0\" UNLESS YOU COMPLETELY UNDERSTAND THIS OPTION.\n");
-
- setup_titles[eLDAP_Host] = _("LDAP host:");
- setup_text[eLDAP_Host] = _(
-"Please enter the host name or IP address of your LDAP server.\n");
-
- setup_titles[eLDAP_Port] = _("LDAP port number:");
- setup_text[eLDAP_Port] = _(
-"Please enter the port number of the LDAP service (usually 389).\n");
-
- setup_titles[eLDAP_Base_DN] = _("LDAP base DN:");
- setup_text[eLDAP_Base_DN] = _(
-"Please enter the Base DN to search for authentication\n"
-"(for example: dc=example,dc=com)\n");
-
- setup_titles[eLDAP_Bind_DN] = _("LDAP bind DN:");
- setup_text[eLDAP_Bind_DN] = _(
-"Please enter the DN of an account to use for binding to the LDAP server for "
-"performing queries. The account does not require any other privileges. If "
-"your LDAP server allows anonymous queries, you can leave this blank.\n");
-
- setup_titles[eLDAP_Bind_PW] = _("LDAP bind password:");
- setup_text[eLDAP_Bind_PW] = _(
-"If you entered a Bind DN in the previous question, you must now enter\n"
-"the password associated with that account. Otherwise, you can leave this\n"
-"blank.\n");
-
-#if 0
-// Debug loading of locales... Strace does a better job though.
- printf("Message catalog directory: %s\n", bindtextdomain("citadel-setup", LOCALEDIR"/locale"));
- printf("Text domain: %s\n", textdomain("citadel-setup"));
- printf("Text domain Charset: %s\n", bind_textdomain_codeset("citadel-setup","UTF8"));
- {
- int i;
- for (i = 0; i < eMaxQuestions; i++)
- printf("%s - %s\n", setup_titles[i], _(setup_titles[i]));
- exit(0);
- }
-#endif
-}
-
-
-void title(const char *text) {
- printf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n<%s>\n", text);
-}
-
-
-int yesno(const char *question, int default_value) {
- int answer = 0;
- char buf[SIZ];
-
- do {
- printf("%s\n%s [%s] --> ", question, _("Yes/No"), ( default_value ? _("Yes") : _("No") ));
- if (fgets(buf, sizeof buf, stdin)) {
- answer = tolower(buf[0]);
- if ((buf[0]==0) || (buf[0]==13) || (buf[0]==10)) {
- answer = default_value;
- }
- else if (answer == 'y') {
- answer = 1;
- }
- else if (answer == 'n') {
- answer = 0;
- }
- }
- } while ((answer < 0) || (answer > 1));
- return (answer);
-}
-
-
-void important_message(const char *title, const char *msgtext) {
- char buf[SIZ];
-
- printf("\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n");
- printf(" %s \n\n%s\n\n", title, msgtext);
- printf("%s", _("Press return to continue..."));
- if (fgets(buf, sizeof buf, stdin)) {
- ;
- }
-}
-
-
-void important_msgnum(int msgnum) {
- important_message(_("Important Message"), setup_text[msgnum]);
-}
-
-
-void display_error(char *error_message_format, ...) {
- StrBuf *Msg;
- va_list arg_ptr;
-
- Msg = NewStrBuf();
- va_start(arg_ptr, error_message_format);
- StrBufVAppendPrintf(Msg, error_message_format, arg_ptr);
- va_end(arg_ptr);
-
- important_message(_("Error"), ChrPtr(Msg));
- FreeStrBuf(&Msg);
-}
-
-
-void progress(char *text, long int curr, long int cmax) {
- static long dots_printed = 0L;
- long a = 0;
-
- if (curr == 0) {
- printf("%s\n", text);
- printf("....................................................");
- printf("..........................\r");
- dots_printed = 0;
- } else if (curr == cmax) {
- printf("\r%79s\n", "");
- } else {
- a = (curr * 100) / cmax;
- a = a * 78;
- a = a / 100;
- while (dots_printed < a) {
- printf("*");
- ++dots_printed;
- }
- }
- fflush(stdout);
-}
-
-
-int uds_connectsock(char *sockpath) {
- int s;
- struct sockaddr_un addr;
-
- memset(&addr, 0, sizeof(addr));
- addr.sun_family = AF_UNIX;
- strcpy(addr.sun_path, sockpath);
-
- s = socket(AF_UNIX, SOCK_STREAM, 0);
- if (s < 0) {
- return(-1);
- }
-
- if (connect(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
- close(s);
- return(-1);
- }
-
- return s;
-}
-
-
-/*
- * input binary data from socket
- */
-void serv_read(char *buf, int bytes) {
- int len, rlen;
-
- len = 0;
- while (len < bytes) {
- rlen = read(serv_sock, &buf[len], bytes - len);
- if (rlen < 1) {
- return;
- }
- len = len + rlen;
- }
-}
-
-
-/*
- * send binary to server
- */
-void serv_write(char *buf, int nbytes) {
- int bytes_written = 0;
- int retval;
- while (bytes_written < nbytes) {
- retval = write(serv_sock, &buf[bytes_written], nbytes - bytes_written);
- if (retval < 1) {
- return;
- }
- bytes_written = bytes_written + retval;
- }
-}
-
-
-/*
- * input string from socket - implemented in terms of serv_read()
- */
-void serv_gets(char *buf) {
- int i;
-
- /* Read one character at a time.
- */
- for (i = 0;; i++) {
- serv_read(&buf[i], 1);
- if (buf[i] == '\n' || i == (SIZ-1))
- break;
- }
-
- /* If we got a long line, discard characters until the newline.
- */
- if (i == (SIZ-1)) {
- while (buf[i] != '\n') {
- serv_read(&buf[i], 1);
- }
- }
-
- /* Strip all trailing nonprintables (crlf)
- */
- buf[i] = 0;
-}
-
-
-/*
- * send line to server - implemented in terms of serv_write()
- */
-void serv_puts(char *buf) {
- serv_write(buf, strlen(buf));
- serv_write("\n", 1);
-}
-
-
-/*
- * Convenience functions to get/set system configuration entries
- */
-void getconf_str(char *buf, char *key) {
- char cmd[SIZ];
- char ret[SIZ];
-
- sprintf(cmd, "CONF GETVAL|%s", key);
- serv_puts(cmd);
- serv_gets(ret);
- if (ret[0] == '2') {
- extract_token(buf, &ret[4], 0, '|', SIZ);
- }
- else {
- strcpy(buf, "");
- }
-}
-
-
-int getconf_int(char *key) {
- char buf[SIZ];
- getconf_str(buf, key);
- return atoi(buf);
-}
-
-
-void setconf_str(char *key, char *val) {
- char buf[SIZ];
-
- sprintf(buf, "CONF PUTVAL|%s|%s", key, val);
- serv_puts(buf);
- serv_gets(buf);
-}
-
-
-void setconf_int(char *key, int val) {
- char buf[SIZ];
-
- sprintf(buf, "CONF PUTVAL|%s|%d", key, val);
- serv_puts(buf);
- serv_gets(buf);
-}
-
-
-/*
- * On systems which use xinetd, see if we can offer to install Citadel as
- * the default telnet target.
- */
-void check_xinetd_entry(void)
-{
- char *filename = "/etc/xinetd.d/telnet";
- FILE *fp;
- char buf[SIZ];
- int already_citadel = 0;
- int rv;
-
- fp = fopen(filename, "r+");
- if (fp == NULL) return; /* Not there. Oh well... */
-
- while (fgets(buf, sizeof buf, fp) != NULL) {
- if (strstr(buf, "/citadel") != NULL) {
- already_citadel = 1;
- }
- }
- fclose(fp);
- if (already_citadel) return; /* Already set up this way. */
-
- /* Otherwise, prompt the user to create an entry. */
- if (getenv("CREATE_XINETD_ENTRY") != NULL) {
- if (strcasecmp(getenv("CREATE_XINETD_ENTRY"), "yes")) {
- return;
- }
- }
- else {
- snprintf(buf, sizeof buf,
- _("Setup can configure the \"xinetd\" service to automatically\n"
- "connect incoming telnet sessions to Citadel, bypassing the\n"
- "host system login: prompt. Would you like to do this?\n"
- )
- );
- if (yesno(buf, 1) == 0) {
- return;
- }
- }
-
- fp = fopen(filename, "w");
- fprintf(fp,
- "# description: telnet service for Citadel users\n"
- "service telnet\n"
- "{\n"
- " disable = no\n"
- " flags = REUSE\n"
- " socket_type = stream\n"
- " wait = no\n"
- " user = root\n"
- " server = /usr/sbin/in.telnetd\n"
- " server_args = -h -L %s/citadel\n"
- " log_on_failure += USERID\n"
- "}\n",
- ctdl_bin_dir
- );
- fclose(fp);
-
- /* Now try to restart the service. This will not have the intended effect on Solaris, but who uses Solaris anymore? */
- rv = system("systemctl restart xinetd >/dev/null 2>&1");
- if (rv != 0) {
- rv = system("service xinetd restart >/dev/null 2>&1");
- }
- if (rv != 0) {
- display_error(_("failed to restart xinetd.\n"));
- }
-}
-
-
-void strprompt(const char *prompt_title, const char *prompt_text, char *Target, char *DefValue)
-{
- char buf[SIZ] = "";
- char setupmsg[SIZ];
-
- strcpy(setupmsg, "");
-
- title(prompt_title);
- printf("\n%s\n", prompt_text);
- printf("%s\n%s\n", _("This is currently set to:"), Target);
- printf("%s\n", _("Enter new value or press return to leave unchanged:"));
- if (fgets(buf, sizeof buf, stdin)) {
- buf[strlen(buf) - 1] = 0;
- }
- if (!IsEmptyStr(buf)) {
- strcpy(Target, buf);
- }
-}
-
-
-void set_bool_val(int msgpos, int *ip, char *DefValue) {
- title(setup_titles[msgpos]);
- *ip = yesno(setup_text[msgpos], *ip);
-}
-
-
-void set_str_val(int msgpos, char *Target, char *DefValue)
-{
- strprompt(setup_titles[msgpos],
- setup_text[msgpos],
- Target,
- DefValue
- );
-}
-
-
-/* like set_str_val() but for numeric values */
-void set_int_val(int msgpos, int *target, char *default_value)
-{
- char buf[32];
- sprintf(buf, "%d", *target);
- do {
- set_str_val(msgpos, buf, default_value);
- } while ( (strcmp(buf, "0")) && (atoi(buf) == 0) );
- *target = atoi(buf);
-}
-
-
-void edit_value(int curr)
-{
- struct passwd *pw = NULL;
- char ctdluidname[256];
- char buf[SIZ];
- char *default_value = NULL;
- int ctdluid = 0;
- int portnum = 0;
- int auth = 0;
- int lportnum = 0;
-
- if (default_value == NULL) {
- default_value = "";
- }
-
- switch (curr) {
-
- case eSysAdminName:
- getconf_str(admin_name, "c_sysadm");
- set_str_val(curr, admin_name, default_value);
- setconf_str("c_sysadm", admin_name);
- break;
-
- case eSysAdminPW:
- set_str_val(curr, admin_pass, default_value);
- break;
-
- case eUID:
- ctdluid = getconf_int("c_ctdluid");
- pw = getpwuid(ctdluid);
- if (pw == NULL) {
- set_int_val(curr, &ctdluid, default_value);
- }
- else {
- strcpy(ctdluidname, pw->pw_name);
- set_str_val(curr, ctdluidname, default_value);
- pw = getpwnam(ctdluidname);
- if (pw != NULL) {
- ctdluid = pw->pw_uid;
- }
- else if (atoi(ctdluidname) > 0) {
- ctdluid = atoi(ctdluidname);
- }
- }
- setconf_int("c_ctdluid", ctdluid);
- break;
-
- case eIP_ADDR:
- getconf_str(buf, "c_ip_addr");
- set_str_val(curr, buf, default_value);
- setconf_str("c_ip_addr", buf);
- break;
-
- case eCTDL_Port:
- portnum = getconf_int("c_port_number");
- set_int_val(curr, &portnum, default_value);
- setconf_int("c_port_number", portnum);
- break;
-
- case eAuthType:
- auth = getconf_int("c_auth_mode");
- set_int_val(curr, &auth, default_value);
- setconf_int("c_auth_mode", auth);
- break;
-
- case eLDAP_Host:
- getconf_str(buf, "c_ldap_host");
- if (IsEmptyStr(buf)) {
- strcpy(buf, "localhost");
- }
- set_str_val(curr, buf, default_value);
- setconf_str("c_ldap_host", buf);
- break;
-
- case eLDAP_Port:
- lportnum = getconf_int("c_ldap_port");
- if (lportnum == 0) {
- lportnum = 389;
- }
- set_int_val(curr, &lportnum, default_value);
- setconf_int("c_ldap_port", lportnum);
- break;
-
- case eLDAP_Base_DN:
- getconf_str(buf, "c_ldap_base_dn");
- set_str_val(curr, buf, default_value);
- setconf_str("c_ldap_base_dn", buf);
- break;
-
- case eLDAP_Bind_DN:
- getconf_str(buf, "c_ldap_bind_dn");
- set_str_val(curr, buf, default_value);
- setconf_str("c_ldap_bind_dn", buf);
- break;
-
- case eLDAP_Bind_PW:
- getconf_str(buf, "c_ldap_bind_pw");
- set_str_val(curr, buf, default_value);
- setconf_str("c_ldap_bind_pw", buf);
- break;
- }
-}
-
-
-/*
- * Messages that are no longer in use.
- * We keep them here so we don't lose the translations if we need them later.
- */
-#if 0
-important_message(_("Setup finished"),
-_("Setup of the Citadel server is complete.\n"
-"If you will be using WebCit, please run its\n"
-"setup program now; otherwise, run './citadel'\n"
-"to log in.\n"));
-important_message(_("Setup failed"),
-_("Setup is finished, but the Citadel server failed to start.\n"
-"Go back and check your configuration.\n");
-important_message(_("Setup finished"),
-_("Setup is finished. You may now start the server."));
-#endif
-
-
-int main(int argc, char *argv[])
-{
- int a, i;
- int curr;
- char buf[1024];
- char aaa[128];
- char ctdldir[PATH_MAX]=CTDLDIR;
- struct passwd *pw;
- gid_t gid;
- char *activity = NULL;
-
- /* Keep a mild groove on */
- program_title = _("Citadel setup program");
-
- /* set an invalid setup type */
- setup_type = (-1);
-
- /* parse command line args */
- for (a = 0; a < argc; ++a) {
- if (!strncmp(argv[a], "-u", 2)) {
- strcpy(aaa, argv[a]);
- strcpy(aaa, &aaa[2]);
- setup_type = atoi(aaa);
- }
- else if (!strncmp(argv[a], "-h", 2)) {
- safestrncpy(ctdldir, &argv[a][2], sizeof ctdldir);
- }
- }
-
- if (chdir(ctdldir) != 0) {
- fprintf(stderr, "sendcommand: %s: %s\n", ctdldir, strerror(errno));
- exit(errno);
- }
-
- SetTitles();
-
- /*
- * Connect to the running Citadel server.
- */
- char *connectingmsg = _("Connecting to Citadel server");
- for (i=0; ((i<30) && (serv_sock < 0)) ; ++i) { /* wait for server to start up */
- progress(connectingmsg, i, 30);
- serv_sock = uds_connectsock(file_citadel_admin_socket);
- sleep(1);
- }
- progress(connectingmsg, 30, 30);
-
- if (serv_sock < 0) {
- display_error(
- "%s: %s %s\n",
- _("Setup could not connect to a running Citadel server."),
- strerror(errno), file_citadel_admin_socket
- );
- exit(1);
- }
-
- /*
- * read the server greeting
- */
- serv_gets(buf);
- if (buf[0] != '2') {
- display_error("%s\n", buf);
- exit(2);
- }
-
- /*
- * Are we connected to the correct Citadel server?
- */
- serv_puts("INFO");
- serv_gets(buf);
- if (buf[0] != '1') {
- display_error("%s\n", buf);
- exit(3);
- }
- a = 0;
- while (serv_gets(buf), strcmp(buf, "000")) {
- if (a == 5) {
- if (atoi(buf) != REV_LEVEL) {
- display_error("%s\n",
- _("Your setup program and Citadel server are from different versions.")
- );
- exit(4);
- }
- }
- ++a;
- }
-
- printf("\n\n\n *** %s ***\n\n", program_title);
-
- /* Go through a series of dialogs prompting for config info */
- for (curr = 1; curr < eMaxQuestions; ++curr) {
- edit_value(curr);
-
- if ( (curr == eAuthType)
- && (getconf_int("c_auth_mode") != AUTHMODE_LDAP)
- && (getconf_int("c_auth_mode") != AUTHMODE_LDAP_AD)
- ) {
- curr += 5; /* skip LDAP questions if we're not authenticating against LDAP */
- }
-
- if (curr == eSysAdminName) {
- if (getconf_int("c_auth_mode") == AUTHMODE_NATIVE) {
- /* for native auth mode, fetch the admin's existing pw */
- snprintf(buf, sizeof buf, "AGUP %s", admin_name);
- serv_puts(buf);
- serv_gets(buf);
- if (buf[0] == '2') {
- extract_token(admin_pass, &buf[4], 1, '|', sizeof admin_pass);
- }
- }
- else {
- ++curr; /* skip the password question for non-native auth modes */
- }
- }
- }
-
- if ((pw = getpwuid( getconf_int("c_ctdluid") )) == NULL) {
- gid = getgid();
- } else {
- gid = pw->pw_gid;
- }
-
- if (create_run_directories(getconf_int("c_ctdluid"), gid) != 0) {
- display_error("%s\n", _("failed to create directories"));
- }
-
- activity = _("Reconfiguring Citadel server");
- progress(activity, 0, 5);
- sleep(1); /* Let the message appear briefly */
-
- /*
- * Create the administrator account. It's ok if the command fails if this user already exists.
- */
- if (getconf_int("c_auth_mode") == AUTHMODE_NATIVE) {
- progress(activity, 1, 5);
- snprintf(buf, sizeof buf, "CREU %s|%s", admin_name, admin_pass);
- serv_puts(buf);
- progress(activity, 2, 5);
- serv_gets(buf);
- }
- progress(activity, 3, 5);
-
- /*
- * Assign the desired password and access level to the administrator account.
- */
- if (getconf_int("c_auth_mode") == AUTHMODE_NATIVE) {
- snprintf(buf, sizeof buf, "AGUP %s", admin_name);
- serv_puts(buf);
- progress(activity, 4, 5);
- serv_gets(buf);
- if (buf[0] == '2') {
- int admin_flags = extract_int(&buf[4], 2);
- int admin_times_called = extract_int(&buf[4], 3);
- int admin_msgs_posted = extract_int(&buf[4], 4);
- snprintf(buf, sizeof buf, "ASUP %s|%s|%d|%d|%d|6",
- admin_name, admin_pass, admin_flags, admin_times_called, admin_msgs_posted
- );
- serv_puts(buf);
- serv_gets(buf);
- }
- }
- progress(activity, 5, 5);
-
- check_xinetd_entry(); /* Check /etc/xinetd.d/telnet */
-
- /*
- * Restart citserver
- */
- activity = _("Restarting Citadel server to apply changes");
- progress(activity, 0, 51);
-
- serv_puts("TIME");
- serv_gets(buf);
- long original_start_time = extract_long(&buf[4], 3);
-
- progress(activity, 1, 51);
- serv_puts("DOWN 1");
- progress(activity, 2, 51);
- serv_gets(buf);
- if (buf[0] != '2') {
- display_error("%s\n", buf);
- exit(6);
- }
-
- close(serv_sock);
- serv_sock = (-1);
-
- for (i=3; i<=6; ++i) { /* wait for server to shut down */
- progress(activity, i, 51);
- sleep(1);
- }
-
- for (i=7; ((i<=48) && (serv_sock < 0)) ; ++i) { /* wait for server to start up */
- progress(activity, i, 51);
- serv_sock = uds_connectsock(file_citadel_admin_socket);
- sleep(1);
- }
-
- progress(activity, 49, 51);
- serv_gets(buf);
-
- progress(activity, 50, 51);
- serv_puts("TIME");
- serv_gets(buf);
- long new_start_time = extract_long(&buf[4], 3);
-
- close(serv_sock);
- progress(activity, 51, 51);
-
- if ((original_start_time == new_start_time) || (new_start_time <= 0)) {
- display_error("%s\n", _("Setup failed to restart Citadel server. Please restart it manually."));
- exit(7);
- }
-
- exit(0);
- return 0;
-}
--- /dev/null
+// system-level password checking for host auth mode
+// by Nathan Bryant, March 1999
+// updated by Trey van Riper, June 2005
+//
+// Copyright (c) 1999-2016 by the citadel.org team
+//
+// This program is open source software. Use, duplication, or disclosure
+// is subject to the terms of the GNU General Public License, version 3.
+// The program is distributed without any warranty, expressed or implied.
+
+#if defined(__linux) || defined(__sun) // needed for crypt():
+#define _XOPEN_SOURCE
+#define _XOPEN_SOURCE_EXTENDED 1
+#endif
+
+#include <pwd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+
+#include "auth.h"
+#include "sysdep.h"
+
+#ifdef HAVE_GETSPNAM
+#include <shadow.h>
+#endif
+
+#ifdef HAVE_PAM_START
+#include <security/pam_appl.h>
+
+// struct appdata: passed to the conversation function
+struct appdata {
+ const char *name;
+ const char *pw;
+};
+
+// conv(): the PAM conversation function. this assumes that a
+// PAM_PROMPT_ECHO_ON is asking for a username, and a PAM_PROMPT_ECHO_OFF is
+// asking for a password. esoteric authentication modules will fail with this
+// code, but we can't really support them with the existing client protocol
+// anyway. the failure mode should be to deny access, in any case.
+static int conv(int num_msg, const struct pam_message **msg, struct pam_response **resp, void *appdata_ptr) {
+ struct pam_response *temp_resp;
+ struct appdata *data = appdata_ptr;
+
+ if ((temp_resp =
+ malloc(sizeof(struct pam_response[num_msg]))) == NULL)
+ return PAM_CONV_ERR;
+
+ while (num_msg--) {
+ switch ((*msg)[num_msg].msg_style) {
+ case PAM_PROMPT_ECHO_ON:
+ temp_resp[num_msg].resp = strdup(data->name);
+ break;
+ case PAM_PROMPT_ECHO_OFF:
+ temp_resp[num_msg].resp = strdup(data->pw);
+ break;
+ default:
+ temp_resp[num_msg].resp = NULL;
+ }
+ temp_resp[num_msg].resp_retcode = 0;
+ }
+
+ *resp = temp_resp;
+ return PAM_SUCCESS;
+}
+#endif // HAVE_PAM_START
+
+
+// check that `pass' is the correct password for `uid'
+// returns zero if no, nonzero if yes
+int validate_password(uid_t uid, const char *pass) {
+ if (pass == NULL) {
+ return (0);
+ }
+#ifdef HAVE_PAM_START
+ struct pam_conv pc;
+ struct appdata data;
+ pam_handle_t *ph;
+ int i;
+#else
+ char *crypted_pwd;
+#ifdef HAVE_GETSPNAM
+ struct spwd *sp;
+#endif
+#endif
+ struct passwd *pw;
+ int retval = 0;
+
+ pw = getpwuid(uid);
+ if (pw == NULL) {
+ return retval;
+ }
+#ifdef HAVE_PAM_START
+
+#ifdef PAM_DATA_SILENT
+ int flags = PAM_DATA_SILENT;
+#else
+ int flags = 0;
+#endif
+
+ pc.conv = conv;
+ pc.appdata_ptr = &data;
+ data.name = pw->pw_name;
+ data.pw = pass;
+ if (pam_start("citadel", pw->pw_name, &pc, &ph) != PAM_SUCCESS)
+ return (0);
+
+ if ((i = pam_authenticate(ph, flags)) == PAM_SUCCESS) {
+ if ((i = pam_acct_mgmt(ph, flags)) == PAM_SUCCESS) {
+ retval = -1;
+ }
+ }
+
+ pam_end(ph, i | flags);
+#else
+ crypted_pwd = pw->pw_passwd;
+
+#ifdef HAVE_GETSPNAM
+ if (pw == NULL)
+ return (0);
+ if (pw->pw_name == NULL)
+ return (0);
+ if ((sp = getspnam(pw->pw_name)) != NULL) {
+ crypted_pwd = sp->sp_pwdp;
+ }
+#endif
+
+ if (!strcmp(crypt(pass, crypted_pwd), crypted_pwd)) {
+ retval = -1;
+ }
+#endif // HAVE_PAM_START
+
+ return retval;
+}
--- /dev/null
+
+int validate_password(uid_t uid, const char *pass);
--- /dev/null
+#ifndef AXDEFS
+
+char *axdefs[]={
+ "Deleted",
+ "New User",
+ "Problem User",
+ "Local User",
+ "Network User",
+ "Preferred User",
+ "Admin",
+ "Admin"
+};
+
+#define AXDEFS 1
+
+#else
+
+extern char *axdefs[];
+
+#endif
+
+
+
+
+#ifndef VIEWDEFS
+
+char *viewdefs[]={
+ "Messages",
+ "Summary",
+ "Address book",
+ "Calendar",
+ "Tasks"
+};
+
+#define VIEWDEFS 1
+
+#else
+
+extern char *viewdefs[];
+
+#endif
+
--- /dev/null
+//
+// Copyright (c) 1987-2022 by the citadel.org team
+//
+// This program is open source software. Use, duplication, or disclosure
+// is subject to the terms of the GNU General Public License, version 3.
+// The program is distributed without any warranty, expressed or implied.
+
+#include <errno.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <pwd.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <string.h>
+#include <limits.h>
+#include <dirent.h>
+
+
+#include "citadel.h"
+#include "sysdep.h"
+#include "citadel_dirs.h"
+/* These pipes are used to talk to the chkpwd daemon, which is forked during startup */
+int chkpwd_write_pipe[2];
+int chkpwd_read_pipe[2];
+
+/*
+ * Validate a password on the host unix system by talking to the chkpwd daemon
+ */
+static int validpw(uid_t uid, const char *pass)
+{
+ char buf[256];
+ int rv;
+
+ rv = write(chkpwd_write_pipe[1], &uid, sizeof(uid_t));
+ if (rv == -1) {
+ printf( "Communicatino with chkpwd broken: %s\n", strerror(errno));
+ return 0;
+ }
+
+ rv = write(chkpwd_write_pipe[1], pass, 256);
+ if (rv == -1) {
+ printf( "Communicatino with chkpwd broken: %s\n", strerror(errno));
+ return 0;
+ }
+ rv = read(chkpwd_read_pipe[0], buf, 4);
+ if (rv == -1) {
+ printf( "Communicatino with chkpwd broken: %s\n", strerror(errno));
+ return 0;
+ }
+ if (!strncmp(buf, "PASS", 4)) {
+ printf("pass\n");
+ return(1);
+ }
+
+ printf("fail\n");
+ return 0;
+}
+
+/*
+ * Start up the chkpwd daemon so validpw() has something to talk to
+ */
+void start_chkpwd_daemon(void) {
+ pid_t chkpwd_pid;
+ struct stat filestats;
+ int i;
+
+ printf("Starting chkpwd daemon for host authentication mode\n");
+
+ if ((stat(file_chkpwd, &filestats)==-1) ||
+ (filestats.st_size==0)){
+ printf("didn't find chkpwd daemon in %s: %s\n", file_chkpwd, strerror(errno));
+ abort();
+ }
+ if (pipe(chkpwd_write_pipe) != 0) {
+ printf("Unable to create pipe for chkpwd daemon: %s\n", strerror(errno));
+ abort();
+ }
+ if (pipe(chkpwd_read_pipe) != 0) {
+ printf("Unable to create pipe for chkpwd daemon: %s\n", strerror(errno));
+ abort();
+ }
+
+ chkpwd_pid = fork();
+ if (chkpwd_pid < 0) {
+ printf("Unable to fork chkpwd daemon: %s\n", strerror(errno));
+ abort();
+ }
+ if (chkpwd_pid == 0) {
+ dup2(chkpwd_write_pipe[0], 0);
+ dup2(chkpwd_read_pipe[1], 1);
+ for (i=2; i<256; ++i) close(i);
+ execl(file_chkpwd, file_chkpwd, NULL);
+ printf("Unable to exec chkpwd daemon: %s\n", strerror(errno));
+ abort();
+ exit(errno);
+ }
+}
+
+
+
+int main(int argc, char **argv) {
+ char buf[256];
+ struct passwd *p;
+ int uid;
+
+ printf("\n\n ** host auth mode test utility **\n\n");
+ start_chkpwd_daemon();
+
+ if (getuid() != 0){
+ printf("\n\nERROR: you need to be root to run this!\n\n");
+ return(1);
+ }
+ while(1) {
+ printf("\n\nUsername: ");
+ fgets(buf, sizeof buf, stdin);
+ buf[strlen(buf)-1] = 0;
+ p = getpwnam(buf);
+ if (p == NULL) {
+ printf("Not found\n");
+ }
+ else {
+ uid = p->pw_uid;
+ printf(" uid: %d\n", uid);
+ printf("Password: ");
+ fgets(buf, sizeof buf, stdin);
+ buf[strlen(buf)-1] = 0;
+ validpw(uid, buf);
+ }
+ }
+
+ return(0);
+}
--- /dev/null
+//
+// a setuid helper program for machines which use shadow passwords
+// by Nathan Bryant, March 1999
+//
+// Copyright (c) 1987-2012 by the citadel.org team
+//
+// This program is open source software. Use, duplication, or disclosure
+// is subject to the terms of the GNU General Public License, version 3.
+// The program is distributed without any warranty, expressed or implied.
+
+#include <pwd.h>
+#include <stdio.h>
+#include <limits.h>
+#include <stdlib.h>
+#include <string.h>
+#include <syslog.h>
+#include <unistd.h>
+#include <sys/types.h>
+
+#include <libcitadel.h>
+
+#include "auth.h"
+#include "config.h"
+#include "citadel_dirs.h"
+#include "citadel.h"
+
+int main(void)
+{
+ uid_t uid;
+ char buf[SIZ];
+
+ while (1) {
+ buf[0] = '\0';
+ read(0, &uid, sizeof(uid_t)); /* uid */
+ read(0, buf, 256); /* password */
+
+ if (buf[0] == '\0')
+ return (0);
+ if (validate_password(uid, buf)) {
+ write(1, "PASS", 4);
+ }
+ else {
+ write(1, "FAIL", 4);
+ }
+ }
+
+ return(0);
+}
--- /dev/null
+#%PAM-1.0
+#
+# /etc/pam.d/citadel: PAM configuration file for Linux-PAM.
+#
+auth include system-auth
+account include system-auth
+session include system-auth
--- /dev/null
+// This program attempts to act like a local MDA if you're using sendmail or
+// some other non-Citadel MTA. It basically just contacts the Citadel LMTP
+// listener on a unix domain socket and transmits the message. Really though,
+// if your MTA supports LMTP then you definitely should be using that instead.
+//
+// Copyright (c) 1987-2022 by the citadel.org team
+//
+// This program is open source software. Use, duplication, or disclosure
+// is subject to the terms of the GNU General Public License, version 3.
+// The program is distributed without any warranty, expressed or implied.
+
+#include "sysdep.h"
+#include <stdlib.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <stdio.h>
+#include <signal.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <netdb.h>
+#include <string.h>
+#include <pwd.h>
+#include <errno.h>
+#include <stdarg.h>
+#include <limits.h>
+#include <libcitadel.h>
+#include "citadel.h"
+#include "citadel_dirs.h"
+
+int serv_sock;
+int debug = 0;
+
+void strip_trailing_nonprint(char *buf) {
+ while ( (!IsEmptyStr(buf)) && (!isprint(buf[strlen(buf) - 1])) ) {
+ buf[strlen(buf) - 1] = 0;
+ }
+}
+
+
+void timeout(int signum) {
+ exit(signum);
+}
+
+
+int uds_connectsock(char *sockpath) {
+ int s;
+ struct sockaddr_un addr;
+
+ memset(&addr, 0, sizeof(addr));
+ addr.sun_family = AF_UNIX;
+ strcpy(addr.sun_path, sockpath);
+
+ s = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (s < 0) {
+ fprintf(stderr, "citmail: Can't create socket: %s\n",
+ strerror(errno));
+ exit(3);
+ }
+
+ if (connect(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
+ fprintf(stderr, "citmail: can't connect: %s\n",
+ strerror(errno));
+ close(s);
+ exit(3);
+ }
+
+ return s;
+}
+
+
+// input binary data from socket
+void serv_read(char *buf, int bytes) {
+ int len, rlen;
+
+ len = 0;
+ while (len < bytes) {
+ rlen = read(serv_sock, &buf[len], bytes - len);
+ if (rlen < 1) {
+ return;
+ }
+ len = len + rlen;
+ }
+}
+
+
+// send binary to server
+void serv_write(char *buf, int nbytes) {
+ int bytes_written = 0;
+ int retval;
+ while (bytes_written < nbytes) {
+ retval = write(serv_sock, &buf[bytes_written],
+ nbytes - bytes_written);
+ if (retval < 1) {
+ return;
+ }
+ bytes_written = bytes_written + retval;
+ }
+}
+
+
+// input string from socket - implemented in terms of serv_read()
+void serv_gets(char *buf) {
+ int i;
+
+ // Read one character at a time.
+ for (i = 0;; i++) {
+ serv_read(&buf[i], 1);
+ if (buf[i] == '\n' || i == (SIZ-1))
+ break;
+ }
+
+ // If we got a long line, discard characters until the newline.
+ if (i == (SIZ-1))
+ while (buf[i] != '\n')
+ serv_read(&buf[i], 1);
+
+ // Strip all trailing nonprintables (crlf)
+ buf[i] = 0;
+ strip_trailing_nonprint(buf);
+ if (debug) fprintf(stderr, "> %s\n", buf);
+}
+
+
+// send line to server - implemented in terms of serv_write()
+void serv_puts(char *buf) {
+ if (debug) fprintf(stderr, "< %s\n", buf);
+ serv_write(buf, strlen(buf));
+ serv_write("\n", 1);
+}
+
+
+void cleanup(int exitcode) {
+ char buf[1024];
+
+ if (exitcode != 0) {
+ fprintf(stderr, "citmail: error #%d occurred while sending mail.\n", exitcode);
+ fprintf(stderr, "Please check your Citadel configuration.\n");
+ }
+ serv_puts("QUIT");
+ serv_gets(buf);
+ exit(exitcode);
+}
+
+
+int main(int argc, char **argv) {
+ char buf[1024];
+ char fromline[1024];
+ FILE *fp;
+ int i;
+ struct passwd *pw;
+ int from_header = 0;
+ int in_body = 0;
+ char ctdldir[PATH_MAX]=CTDLDIR;
+ char *sp, *ep;
+ char hostname[256];
+ char **recipients = NULL;
+ int num_recipients = 0;
+ int to_or_cc = 0;
+ int read_recipients_from_headers = 0;
+ char *add_these_recipients = NULL;
+
+ for (i=1; i<argc; ++i) {
+ if (!strcmp(argv[i], "-d")) {
+ debug = 1;
+ }
+ else if (!strcmp(argv[i], "-t")) {
+ read_recipients_from_headers = 1;
+ }
+ else if (!strncmp(argv[i], "-h", 2)) {
+ safestrncpy(ctdldir, &argv[i][2], sizeof ctdldir);
+ }
+ else if (argv[i][0] != '-') {
+ ++num_recipients;
+ recipients = realloc(recipients, (num_recipients * sizeof (char *)));
+ recipients[num_recipients - 1] = strdup(argv[i]);
+ }
+ }
+
+ if (chdir(ctdldir) != 0) {
+ fprintf(stderr, "sendcommand: %s: %s\n", ctdldir, strerror(errno));
+ exit(errno);
+ }
+
+ pw = getpwuid(getuid());
+
+ fp = tmpfile();
+ if (fp == NULL) return(errno);
+ serv_sock = uds_connectsock(file_lmtp_socket);
+ serv_gets(buf);
+ if (buf[0] != '2') {
+ fprintf(stderr, "%s\n", &buf[4]);
+ if (debug) fprintf(stderr, "citmail: could not connect to LMTP socket.\n");
+ cleanup(1);
+ }
+
+ sp = strchr (buf, ' ');
+ if (sp == NULL) {
+ if (debug) fprintf(stderr, "citmail: could not calculate hostname.\n");
+ cleanup(2);
+ }
+ sp ++;
+ ep = strchr (sp, ' ');
+ if (ep == NULL) {
+ if (debug) fprintf(stderr, "citmail: error parsing hostname\n");
+ cleanup(3);
+ }
+ else
+ *ep = '\0';
+
+ strncpy(hostname, sp, sizeof hostname);
+
+ snprintf(fromline, sizeof fromline, "From: %s@%s", pw->pw_name, hostname);
+ while (fgets(buf, 1024, stdin) != NULL) {
+ if ( ( (buf[0] == 13) || (buf[0] == 10)) && (in_body == 0) ) {
+ in_body = 1;
+ if (from_header == 0) {
+ fprintf(fp, "%s%s", fromline, buf);
+ }
+ }
+ if (in_body == 0 && !strncasecmp(buf, "From:", 5)) {
+ strcpy(fromline, buf);
+ from_header = 1;
+ }
+
+ if (read_recipients_from_headers) {
+ add_these_recipients = NULL;
+ if ((isspace(buf[0])) && (to_or_cc)) {
+ add_these_recipients = buf;
+ }
+ else {
+ if ((!strncasecmp(buf, "To:", 3)) || (!strncasecmp(buf, "Cc:", 3))) {
+ to_or_cc = 1;
+ }
+ else {
+ to_or_cc = 0;
+ }
+ if (to_or_cc) {
+ add_these_recipients = &buf[3];
+ }
+ }
+
+ if (add_these_recipients) {
+ int num_recp_on_this_line;
+ char this_recp[256];
+
+ num_recp_on_this_line = num_tokens(add_these_recipients, ',');
+ for (i=0; i<num_recp_on_this_line; ++i) {
+ extract_token(this_recp, add_these_recipients,
+ i, ',', sizeof this_recp);
+ striplt(this_recp);
+ if (!IsEmptyStr(this_recp)) {
+ ++num_recipients;
+ recipients = realloc(recipients,
+ (num_recipients * sizeof (char *)));
+ recipients[num_recipients - 1] = strdup(this_recp);
+ }
+ }
+ }
+ }
+
+ fprintf(fp, "%s", buf);
+ }
+ strip_trailing_nonprint(fromline);
+
+ sprintf(buf, "LHLO %s", hostname);
+ serv_puts(buf);
+ do {
+ serv_gets(buf);
+ strcat(buf, " ");
+ } while (buf[3] == '-');
+ if (buf[0] != '2') {
+ if (debug) fprintf(stderr, "citmail: LHLO command failed\n");
+ cleanup(4);
+ }
+
+ snprintf(buf, sizeof buf, "MAIL %s", fromline);
+ serv_puts(buf);
+ serv_gets(buf);
+ if (buf[0] != '2') {
+ if (debug) fprintf(stderr, "citmail: MAIL command failed\n");
+ cleanup(5);
+ }
+
+ for (i=0; i<num_recipients; ++i) {
+ snprintf(buf, sizeof buf, "RCPT To: %s", recipients[i]);
+ serv_puts(buf);
+ serv_gets(buf);
+ free(recipients[i]);
+ }
+ free(recipients);
+
+ serv_puts("DATA");
+ serv_gets(buf);
+ if (buf[0]!='3') {
+ if (debug) fprintf(stderr, "citmail: DATA command failed\n");
+ cleanup(6);
+ }
+
+ rewind(fp);
+ while (fgets(buf, sizeof buf, fp) != NULL) {
+ strip_trailing_nonprint(buf);
+ serv_puts(buf);
+ }
+ serv_puts(".");
+ serv_gets(buf);
+ if (buf[0] != '2') {
+ fprintf(stderr, "%s\n", &buf[4]);
+ cleanup(7);
+ }
+ else {
+ cleanup(0);
+ }
+
+ // We won't actually reach this statement but the compiler will
+ // display a spurious warning about an invalid return type if
+ // we don't return an int.
+ return(0);
+}
--- /dev/null
+// Across-the-wire migration utility for Citadel
+//
+// Copyright (c) 2009-2021 citadel.org
+//
+// This program is open source software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License version 3.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/utsname.h>
+#include <sys/wait.h>
+#include <signal.h>
+#include <netdb.h>
+#include <errno.h>
+#include <limits.h>
+#include <pwd.h>
+#include <time.h>
+#include <readline/readline.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <libcitadel.h>
+#include "citadel.h"
+#include "axdefs.h"
+#include "sysdep.h"
+#include "config.h"
+#include "citadel_dirs.h"
+
+
+// support for getz() -- (globals would not be appropriate in a multithreaded program)
+static int gmaxlen = 0;
+static char *gdeftext = NULL;
+
+
+// support function for getz()
+static int limit_rl(FILE *dummy) {
+ if (rl_end > gmaxlen) {
+ return '\b';
+ }
+ return rl_getc(dummy);
+}
+
+
+// support function for getz()
+static int getz_deftext(void) {
+ if (gdeftext) {
+ rl_insert_text(gdeftext);
+ gdeftext = NULL;
+ rl_startup_hook = NULL;
+ }
+ return 0;
+}
+
+
+// Replacement for gets() that uses libreadline.
+void getz(char *buf, int maxlen, char *default_value, char *prompt) {
+ rl_startup_hook = getz_deftext;
+ rl_getc_function = limit_rl;
+ gmaxlen = maxlen;
+ gdeftext = default_value;
+ strcpy(buf, readline(prompt));
+}
+
+
+// Exit from the program while displaying an error code
+void ctdlmigrate_exit(int cmdexit) {
+ printf("\n\n\033[3%dmExit code %d\033[0m\n", (cmdexit ? 1 : 2), cmdexit);
+ exit(cmdexit);
+}
+
+
+// Connect to a Citadel on a remote host using a TCP/IP socket
+static int tcp_connectsock(char *host, char *service) {
+ struct in6_addr serveraddr;
+ struct addrinfo hints;
+ struct addrinfo *res = NULL;
+ struct addrinfo *ai = NULL;
+ int rc = (-1);
+ int sock = (-1);
+
+ if ((host == NULL) || IsEmptyStr(host)) {
+ return(-1);
+ }
+ if ((service == NULL) || IsEmptyStr(service)) {
+ return(-1);
+ }
+
+ memset(&hints, 0x00, sizeof(hints));
+ hints.ai_flags = AI_NUMERICSERV;
+ hints.ai_family = AF_UNSPEC;
+ hints.ai_socktype = SOCK_STREAM;
+
+ // Handle numeric IPv4 and IPv6 addresses
+ rc = inet_pton(AF_INET, host, &serveraddr);
+ if (rc == 1) { // dotted quad
+ hints.ai_family = AF_INET;
+ hints.ai_flags |= AI_NUMERICHOST;
+ } else {
+ rc = inet_pton(AF_INET6, host, &serveraddr);
+ if (rc == 1) { // IPv6 address
+ hints.ai_family = AF_INET6;
+ hints.ai_flags |= AI_NUMERICHOST;
+ }
+ }
+
+ // Begin the connection process
+ rc = getaddrinfo(host, service, &hints, &res);
+ if (rc != 0) {
+ fprintf(stderr, "ctdlmigrate: %s\n", strerror(errno));
+ return (-1);
+ }
+
+ // Try all available addresses until we connect to one or until we run out.
+ for (ai = res; ai != NULL; ai = ai->ai_next) {
+ sock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol);
+ if (sock < 0) {
+ fprintf(stderr, "ctdlmigrate: %s\n", strerror(errno));
+ return (-1);
+ }
+
+ rc = connect(sock, ai->ai_addr, ai->ai_addrlen);
+ if (rc >= 0) {
+ return (sock); // Connected!
+ }
+ else {
+ fprintf(stderr, "ctdlmigrate: %s\n", strerror(errno));
+ close(sock); // Failed. Close the socket to avoid fd leak!
+ }
+ }
+ return (-1);
+}
+
+
+// Connect to a Citadel on a remote host using a unix domaion socket
+int uds_connectsock(char *sockpath) {
+ int s;
+ struct sockaddr_un addr;
+
+ memset(&addr, 0, sizeof(addr));
+ addr.sun_family = AF_UNIX;
+ strcpy(addr.sun_path, sockpath);
+
+ s = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (s < 0) {
+ fprintf(stderr, "ctdlmigrate: Can't create socket: %s\n", strerror(errno));
+ return(-1);
+ }
+
+ if (connect(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
+ fprintf(stderr, "ctdlmigrate: can't connect: %s\n", strerror(errno));
+ close(s);
+ return(-1);
+ }
+
+ return s;
+}
+
+
+// input binary data from socket
+void serv_read(int serv_sock, char *buf, int bytes) {
+ int len = 0;
+ int rlen = 0;
+
+ while (len < bytes) {
+ rlen = read(serv_sock, &buf[len], bytes - len);
+ if (rlen < 1) {
+ return;
+ }
+ len = len + rlen;
+ }
+}
+
+
+// send binary to server
+void serv_write(int serv_sock, char *buf, int nbytes) {
+ int bytes_written = 0;
+ int retval;
+ while (bytes_written < nbytes) {
+ retval = write(serv_sock, &buf[bytes_written], nbytes - bytes_written);
+ if (retval < 1) {
+ return;
+ }
+ bytes_written = bytes_written + retval;
+ }
+}
+
+
+// input string from socket - implemented in terms of serv_read()
+void serv_gets(int serv_sock, char *buf) {
+ int i;
+
+ // Read one character at a time.
+ for (i = 0;; i++) {
+ serv_read(serv_sock, &buf[i], 1);
+ if (buf[i] == '\n' || i == (SIZ-1))
+ break;
+ }
+
+ // If we got a long line, discard characters until the newline.
+ if (i == (SIZ-1)) {
+ while (buf[i] != '\n') {
+ serv_read(serv_sock, &buf[i], 1);
+ }
+ }
+
+ // Strip all trailing nonprintables (crlf)
+ buf[i] = 0;
+}
+
+
+// send line to server - implemented in terms of serv_write()
+void serv_puts(int serv_sock, char *buf) {
+ serv_write(serv_sock, buf, strlen(buf));
+ serv_write(serv_sock, "\n", 1);
+}
+
+
+// send formatted printable data to the server
+void serv_printf(int serv_sock, const char *format, ...) {
+ va_list arg_ptr;
+ char buf[1024];
+
+ va_start(arg_ptr, format);
+ if (vsnprintf(buf, sizeof buf, format, arg_ptr) == -1)
+ buf[sizeof buf - 2] = '\n';
+ serv_write(serv_sock, buf, strlen(buf));
+ va_end(arg_ptr);
+}
+
+
+// You know what main() does. If you don't, you shouldn't be trying to understand this program.
+int main(int argc, char *argv[]) {
+ char ctdldir[PATH_MAX]=CTDLDIR;
+ char yesno[2];
+ int cmdexit = 0; // when something fails, set cmdexit to nonzero, and skip to the end
+ char buf[PATH_MAX];
+
+ char remote_user[128];
+ char remote_host[128];
+ char remote_pass[128];
+ char *remote_port = "504";
+
+ int linecount = 0;
+ int a;
+ int remote_server_socket = (-1);
+ int local_admin_socket = (-1);
+ int progress = 0;
+
+ // Parse command line
+ while ((a = getopt(argc, argv, "h:")) != EOF) {
+ switch (a) {
+ case 'h':
+ strcpy(ctdldir, optarg);
+ break;
+ default:
+ fprintf(stderr, "ctdlmigrate: usage: ctdlmigrate [-h server_dir]\n");
+ return(1);
+ }
+ }
+
+ if (chdir(ctdldir) != 0) {
+ fprintf(stderr, "ctdlmigrate: %s: %s\n", ctdldir, strerror(errno));
+ exit(errno);
+ }
+
+ signal(SIGINT, ctdlmigrate_exit);
+ signal(SIGQUIT, ctdlmigrate_exit);
+ signal(SIGTERM, ctdlmigrate_exit);
+ signal(SIGSEGV, ctdlmigrate_exit);
+ signal(SIGHUP, ctdlmigrate_exit);
+ signal(SIGPIPE, ctdlmigrate_exit);
+
+ printf( "\033[2J\033[H\n"
+ " \033[32m╔═══════════════════════════════════════════════╗\n"
+ " ║ ║\n"
+ " ║ \033[33mCitadel over-the-wire migration utility \033[32m║\n"
+ " ║ ║\n"
+ " ╚═══════════════════════════════════════════════╝\033[0m\n"
+ "\n"
+ "This utility is designed to migrate your Citadel installation\n"
+ "to a new host system via a network connection, without disturbing\n"
+ "the source system. The target may be a different CPU architecture\n"
+ "and/or operating system. The source system should be running\n"
+ "Citadel version \033[33m%d\033[0m or newer, and the target system should be running\n"
+ "either the same version or a newer version.\n"
+ "\n"
+ "You must run this utility on the TARGET SYSTEM. Any existing data\n"
+ "on this system will be ERASED. Your target system will be on this\n"
+ "host in %s.\n"
+ "\n",
+ EXPORT_REV_MIN, ctdldir
+ );
+
+ getz(yesno, 1, NULL, "Do you wish to continue? ");
+ puts(yesno);
+ if (tolower(yesno[0]) != 'y') {
+ cmdexit = 101;
+ }
+
+ if (!cmdexit) {
+ printf( "\033[2J\033[H\n"
+ "\033[32m╔═══════════════════════════════════════════════╗\n"
+ "║ ║\n"
+ "║ \033[33mValidate source and target systems\033[32m ║\n"
+ "║ ║\n"
+ "╚═══════════════════════════════════════════════╝\033[0m\n"
+ "\n\n");
+
+ printf("First we must validate that the local target system is running\n");
+ printf("and ready to receive data.\n");
+ printf("Checking connectivity to Citadel in %s...\n", ctdldir);
+ local_admin_socket = uds_connectsock("citadel-admin.socket");
+ if (local_admin_socket < 0) {
+ cmdexit = 102;
+ }
+ }
+
+ if (!cmdexit) {
+ serv_gets(local_admin_socket, buf);
+ puts(buf);
+ if (buf[0] != '2') {
+ cmdexit = 103;
+ }
+ }
+
+ if (!cmdexit) {
+ serv_puts(local_admin_socket, "ECHO Connection to Citadel Server succeeded.");
+ serv_gets(local_admin_socket, buf);
+ puts(buf);
+ if (buf[0] != '2') {
+ cmdexit = 104;
+ }
+ }
+
+ if (!cmdexit) {
+ printf("\n");
+ printf("OK, this side is ready to go. Now we must connect to the source system.\n\n");
+
+ getz(remote_host, sizeof remote_host, NULL, "Enter the name or IP address of the source system: ");
+ getz(remote_user, sizeof remote_user, "admin", " Enter the user name of an administrator account: ");
+ getz(remote_pass, sizeof remote_pass, NULL, " Enter the password for this account: ");
+
+ remote_server_socket = tcp_connectsock(remote_host, remote_port);
+ if (remote_server_socket < 0) {
+ cmdexit = 105;
+ }
+ }
+
+ if (!cmdexit) {
+ serv_gets(remote_server_socket, buf);
+ puts(buf);
+ if (buf[0] != '2') {
+ cmdexit = 106;
+ }
+ }
+
+ if (!cmdexit) {
+ serv_printf(remote_server_socket, "USER %s\n", remote_user);
+ serv_gets(remote_server_socket, buf);
+ puts(buf);
+ if (buf[0] != '3') {
+ cmdexit = 107;
+ }
+ }
+
+ if (!cmdexit) {
+ serv_printf(remote_server_socket, "PASS %s\n", remote_pass);
+ serv_gets(remote_server_socket, buf);
+ puts(buf);
+ if (buf[0] != '2') {
+ cmdexit = 108;
+ }
+ }
+
+ if (!cmdexit) {
+ printf( "\033[2J\033[H\n"
+ "\033[32m╔═══════════════════════════════════════════════════════════════════╗\n"
+ "║ ║\n"
+ "║ \033[33mMigrating from: %-50s\033[32m║\n"
+ "║ ║\n"
+ "╠═══════════════════════════════════════════════════════════════════╣\n"
+ "║ ║\n"
+ "║ Lines received: 0 Percent complete: 0 ║\n"
+ "║ ║\n"
+ "╚═══════════════════════════════════════════════════════════════════╝\033[0m\n"
+ "\n", remote_host
+ );
+ }
+
+ if (!cmdexit) {
+ serv_puts(remote_server_socket, "MIGR export");
+ serv_gets(remote_server_socket, buf);
+ if (buf[0] != '1') {
+ printf("\n\033[31m%s\033[0m\n", buf);
+ cmdexit = 109;
+ }
+ }
+
+ if (!cmdexit) {
+ serv_puts(local_admin_socket, "MIGR import");
+ serv_gets(local_admin_socket, buf);
+ if (buf[0] != '4') {
+ printf("\n\033[31m%s\033[0m\n", buf);
+ cmdexit = 110;
+ }
+ }
+
+ if (!cmdexit) {
+ char *ptr;
+ time_t last_update = time(NULL);
+
+ while (serv_gets(remote_server_socket, buf), strcmp(buf, "000")) {
+ ptr = strchr(buf, '\n');
+ if (ptr) *ptr = 0; // remove the newline character
+ ++linecount;
+ if (!strncasecmp(buf, "<progress>", 10)) {
+ progress = atoi(&buf[10]);
+ printf("\033[8;65H\033[33m%d\033[0m\033[12;0H\n", progress);
+ }
+ if (time(NULL) != last_update) {
+ last_update = time(NULL);
+ printf("\033[8;19H\033[33m%d\033[0m\033[12;0H\n", linecount);
+ }
+ serv_puts(local_admin_socket, buf);
+ }
+
+ serv_puts(local_admin_socket, "000");
+ }
+
+ if ( (cmdexit == 0) && (progress < 100) ) {
+ printf("\033[31mERROR: source stream ended before 100 percent of data was received.\033[0m\n");
+ cmdexit = 111;
+ }
+
+ if (!cmdexit) {
+ printf("\033[36mMigration is complete. Restarting the target server.\033[0m\n");
+ serv_puts(local_admin_socket, "DOWN 1");
+ serv_gets(local_admin_socket, buf);
+ puts(buf);
+ printf("\033[36mIt is recommended that you shut down the source server now.\033[0m\n");
+ printf("\033[36mRemember to copy over your SSL keys and file libraries if appropriate.\033[0m\n");
+ }
+
+ close(remote_server_socket);
+ close(local_admin_socket);
+ ctdlmigrate_exit(cmdexit);
+}
--- /dev/null
+#!/bin/bash
+
+die () {
+ echo Exiting.
+ exit 1
+}
+
+DATA_DIR="/usr/local/citadel"
+
+usage() {
+ echo "Usage: database_cleanup.sh [ -h citadel_dir ]"
+ exit 2
+}
+
+PARSED_ARGUMENTS=$(getopt -a -n database_cleanup.sh -o h: -- "$@")
+VALID_ARGUMENTS=$?
+if [ "$VALID_ARGUMENTS" != "0" ]; then
+ usage
+fi
+
+eval set -- "$PARSED_ARGUMENTS"
+while :
+do
+ case "$1" in
+ -h | --alpha)
+ DATA_DIR=${2}
+ shift 2
+ ;;
+ # -- means the end of the arguments; drop this, and break out of the while loop
+ --) shift; break ;;
+ # If invalid options were passed, then getopt should have reported an error,
+ # which we checked as VALID_ARGUMENTS when getopt was called...
+ *) echo "Unexpected option: $1 - this should not happen."
+ usage
+ ;;
+ esac
+done
+
+DATA_DIR=$DATA_DIR/data
+
+# If we're on a Docker or Easy Install system, use our own db_ tools.
+if [ -x /usr/local/ctdlsupport/bin/db_dump ] ; then
+ export PATH=/usr/local/ctdlsupport/bin:$PATH
+ RECOVER=/usr/local/ctdlsupport/bin/db_recover
+ DUMP=/usr/local/ctdlsupport/bin/db_dump
+ LOAD=/usr/local/ctdlsupport/bin/db_load
+
+# otherwise look in /usr/local
+elif [ -x /usr/local/bin/db_dump ] ; then
+ export PATH=/usr/local/bin:$PATH
+ RECOVER=/usr/local/bin/db_recover
+ DUMP=/usr/local/bin/db_dump
+ LOAD=/usr/local/bin/db_load
+
+# usual install
+else
+ if test -f /usr/bin/db_dump; then
+ RECOVER=/usr/bin/db_recover
+ DUMP=/usr/bin/db_dump
+ LOAD=/usr/bin/db_load
+ else
+ if test -n "`ls /usr/bin/db?*recover`"; then
+ # seems we have something debian alike thats adding version in the filename
+ if test "`ls /usr/bin/db*recover |wc -l`" -gt "1"; then
+ echo "Warning: you have more than one version of the Berkeley DB utilities installed." 1>&2
+ echo "Using the latest one." 1>&2
+ RECOVER=`ls /usr/bin/db*recover |sort |tail -n 1`
+ DUMP=`ls /usr/bin/db*dump |sort |tail -n 1`
+ LOAD=`ls /usr/bin/db*load |sort |tail -n 1`
+ else
+ RECOVER=`ls /usr/bin/db*recover`
+ DUMP=`ls /usr/bin/db*dump`
+ LOAD=`ls /usr/bin/db*load`
+ fi
+ else
+ echo "database_cleanup.sh cannot find the Berkeley DB utilities. Exiting." 1>&2
+ die
+ fi
+
+ fi
+fi
+
+# Ok, let's begin.
+
+clear
+cat <<!
+
+Citadel Database Cleanup
+---------------------------
+
+This script exports, deletes, and re-imports your database. If you have
+any data corruption issues, this program may be able to clean them up for you.
+
+Please note that this program does a Berkeley DB dump/load, not a Citadel
+export. The export files are not generated by the Citadel export module.
+
+WARNING #1:
+ MAKE A BACKUP OF YOUR DATA BEFORE ATTEMPTING THIS. There is no guarantee
+ that this will work (in case of disk full, power failure, program crash)!
+
+WARNING #2:
+ citserver must NOT be running while you do this.
+
+WARNING #3:
+ Please try "cd $DATA_DIR; $RECOVER -c" first. Run citserver afterwards to
+ revalidate whether its fixed or not, No news might be good news. Use this
+ tool only if that one fails to fix your problem.
+
+WARNING #4:
+ You must have an amount of free space in /tmp that is at least twice
+ the size of your database. see the following output:
+
+`df -h`
+
+you will need `du -sh $DATA_DIR|sed "s;/.*;;"` of free space.
+
+!
+
+echo We will attempt to look for a Citadel database in $DATA_DIR
+echo -n "Do you want to continue? "
+
+read yesno
+case "$yesno" in
+ "y" | "Y" | "yes" | "YES" | "Yes" )
+ echo
+ echo DO NOT INTERRUPT THIS PROCESS.
+ echo
+ ;;
+ * )
+ exit
+esac
+
+for x in 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
+do
+ filename=cdb.$x
+ echo Dumping $filename
+ $DUMP -h $DATA_DIR $filename >/tmp/CitaDump.$x || {
+ echo error $?
+ die
+ }
+ rm -vf $DATA_DIR/$filename
+done
+
+echo Removing old databases
+rm -vf $DATA_DIR/*
+
+for x in 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
+do
+ filename=cdb.$x
+ echo Loading $filename
+ $LOAD -h $DATA_DIR $filename </tmp/CitaDump.$x && {
+ rm -f /tmp/CitaDump.$x
+ }
+done
+
+echo
+echo Dump/load operation complete. Start your Citadel server now.
+echo
--- /dev/null
+#!/bin/sh
+
+# guesstimezone.sh - an ugly hack of a script to try to guess the time
+# zone currently in use on the host system, and output its name.
+
+# Copyright (c) 1987-2022 by Art Cancro and citadel.org
+
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 3 of the License, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 675 Mass Ave, Cambridge, MA 02139, USA.
+
+convert_timezone()
+{
+ case "$1" in
+ (right/*|posix/*)
+ convert_timezone "${1#*/}"
+ ;;
+ ("Africa/Asmera")
+ echo "Africa/Asmara"
+ ;;
+ ("America/Argentina/ComodRivadavia"|"America/Catamarca")
+ echo "America/Argentina/Catamarca"
+ ;;
+ ("America/Buenos_Aires")
+ echo "America/Argentina/Buenos_Aires"
+ ;;
+ ("America/Cordoba"|"America/Rosario")
+ echo "America/Argentina/Cordoba"
+ ;;
+ ("America/Jujuy")
+ echo "America/Argentina/Jujuy"
+ ;;
+ ("America/Mendoza")
+ echo "America/Argentina/Mendoza"
+ ;;
+ ("Antarctica/South_Pole")
+ echo "Antarctica/McMurdo"
+ ;;
+ "Asia/Ashkhabad")
+ echo "Asia/Ashgabat"
+ ;;
+ ("Asia/Calcutta")
+ echo "Asia/Kolkata"
+ ;;
+ "Asia/Chungking")
+ echo "Asia/Chongqing"
+ ;;
+ "Asia/Dacca")
+ echo "Asia/Dhaka"
+ ;;
+ ("Asia/Katmandu")
+ echo "Asia/Kathmandu"
+ ;;
+ "Asia/Macao")
+ echo "Asia/Macau"
+ ;;
+ ("Asia/Saigon")
+ echo "Asia/Ho_Chi_Minh"
+ ;;
+ "Asia/Thimbu")
+ echo "Asia/Thimphu"
+ ;;
+ "Asia/Ulan_Bator")
+ echo "Asia/Ulaanbaatar"
+ ;;
+ "Atlantic/Faeroe")
+ echo "Atlantic/Faroe"
+ ;;
+ "Australia/ACT" | "Australia/NSW")
+ echo "Australia/Sydney"
+ ;;
+ "Australia/LHI")
+ echo "Australia/Lord_Howe"
+ ;;
+ "Australia/North")
+ echo "Australia/Darwin"
+ ;;
+ "Australia/Queensland")
+ echo "Australia/Brisbane"
+ ;;
+ "Australia/South")
+ echo "Australia/Adelaide"
+ ;;
+ "Australia/Tasmania")
+ echo "Australia/Hobart"
+ ;;
+ "Australia/Victoria")
+ echo "Australia/Melbourne"
+ ;;
+ "Australia/West")
+ echo "Australia/Perth"
+ ;;
+ "Brazil/Acre")
+ echo "America/Rio_Branco"
+ ;;
+ "Brazil/DeNoronha")
+ echo "America/Noronha"
+ ;;
+ "Brazil/East")
+ echo "America/Sao_Paulo"
+ ;;
+ "Brazil/West")
+ echo "America/Manaus"
+ ;;
+ "Canada/Atlantic")
+ echo "America/Halifax"
+ ;;
+ "Canada/Central")
+ echo "America/Winnipeg"
+ ;;
+ "Canada/East-Saskatchewan")
+ echo "America/Regina"
+ ;;
+ "Canada/Eastern")
+ echo "America/Toronto"
+ ;;
+ "Canada/Mountain")
+ echo "America/Edmonton"
+ ;;
+ "Canada/Newfoundland")
+ echo "America/St_Johns"
+ ;;
+ "Canada/Pacific")
+ echo "America/Vancouver"
+ ;;
+ "Canada/Saskatchewan")
+ echo "America/Regina"
+ ;;
+ "Canada/Yukon")
+ echo "America/Whitehorse"
+ ;;
+ "CET")
+ echo "Europe/Paris"
+ ;;
+ "Chile/Continental")
+ echo "America/Santiago"
+ ;;
+ "Chile/EasterIsland")
+ echo "Pacific/Easter"
+ ;;
+ "CST6CDT")
+ echo "SystemV/CST6CDT"
+ ;;
+ "Cuba")
+ echo "America/Havana"
+ ;;
+ "EET")
+ echo "Europe/Helsinki"
+ ;;
+ "Egypt")
+ echo "Africa/Cairo"
+ ;;
+ "Eire")
+ echo "Europe/Dublin"
+ ;;
+ "EST")
+ echo "SystemV/EST5"
+ ;;
+ "EST5EDT")
+ echo "SystemV/EST5EDT"
+ ;;
+ "GB")
+ echo "Europe/London"
+ ;;
+ "GB-Eire")
+ echo "Europe/London"
+ ;;
+ "GMT")
+ echo "Etc/GMT"
+ ;;
+ "GMT0")
+ echo "Etc/GMT0"
+ ;;
+ "GMT-0")
+ echo "Etc/GMT-0"
+ ;;
+ "GMT+0")
+ echo "Etc/GMT+0"
+ ;;
+ "Greenwich")
+ echo "Etc/Greenwich"
+ ;;
+ "Hongkong")
+ echo "Asia/Hong_Kong"
+ ;;
+ "HST")
+ echo "Pacific/Honolulu"
+ ;;
+ "Iceland")
+ echo "Atlantic/Reykjavik"
+ ;;
+ "Iran")
+ echo "Asia/Tehran"
+ ;;
+ "Israel")
+ echo "Asia/Tel_Aviv"
+ ;;
+ "Jamaica")
+ echo "America/Jamaica"
+ ;;
+ "Japan")
+ echo "Asia/Tokyo"
+ ;;
+ "Kwajalein")
+ echo "Pacific/Kwajalein"
+ ;;
+ "Libya")
+ echo "Africa/Tripoli"
+ ;;
+ "MET")
+ echo "Europe/Paris"
+ ;;
+ "Mexico/BajaNorte")
+ echo "America/Tijuana"
+ ;;
+ "Mexico/BajaSur")
+ echo "America/Mazatlan"
+ ;;
+ "Mexico/General")
+ echo "America/Mexico_City"
+ ;;
+ "Mideast/Riyadh87")
+ echo "Asia/Riyadh87"
+ ;;
+ "Mideast/Riyadh88")
+ echo "Asia/Riyadh88"
+ ;;
+ "Mideast/Riyadh89")
+ echo "Asia/Riyadh89"
+ ;;
+ "MST")
+ echo "SystemV/MST7"
+ ;;
+ "MST7MDT")
+ echo "SystemV/MST7MDT"
+ ;;
+ "Navajo")
+ echo "America/Denver"
+ ;;
+ "NZ")
+ echo "Pacific/Auckland"
+ ;;
+ "NZ-CHAT")
+ echo "Pacific/Chatham"
+ ;;
+ "Poland")
+ echo "Europe/Warsaw"
+ ;;
+ "Portugal")
+ echo "Europe/Lisbon"
+ ;;
+ "PRC")
+ echo "Asia/Shanghai"
+ ;;
+ "PST8PDT")
+ echo "SystemV/PST8PDT"
+ ;;
+ "ROC")
+ echo "Asia/Taipei"
+ ;;
+ "ROK")
+ echo "Asia/Seoul"
+ ;;
+ "Singapore")
+ echo "Asia/Singapore"
+ ;;
+ "Turkey")
+ echo "Europe/Istanbul"
+ ;;
+ "UCT")
+ echo "Etc/UCT"
+ ;;
+ "Universal")
+ echo "Etc/UTC"
+ ;;
+ "US/Alaska")
+ echo "America/Anchorage"
+ ;;
+ "US/Aleutian")
+ echo "America/Adak"
+ ;;
+ "US/Arizona")
+ echo "America/Phoenix"
+ ;;
+ "US/Central")
+ echo "America/Chicago"
+ ;;
+ "US/East-Indiana")
+ echo "America/Indianapolis"
+ ;;
+ "US/Eastern")
+ echo "America/New_York"
+ ;;
+ "US/Hawaii")
+ echo "Pacific/Honolulu"
+ ;;
+ "US/Indiana-Starke")
+ echo "America/Indianapolis"
+ ;;
+ "US/Michigan")
+ echo "America/Detroit"
+ ;;
+ "US/Mountain")
+ echo "America/Denver"
+ ;;
+ "US/Pacific")
+ echo "America/Los_Angeles"
+ ;;
+ "US/Samoa")
+ echo "Pacific/Pago_Pago"
+ ;;
+ "UTC")
+ echo "Etc/UTC"
+ ;;
+ "WET")
+ echo "Europe/Lisbon"
+ ;;
+ "W-SU")
+ echo "Europe/Moscow"
+ ;;
+ "Zulu")
+ echo "Etc/UTC"
+ ;;
+ *)
+ echo "$1"
+ ;;
+ esac
+}
+
+md5sum </dev/null >/dev/null 2>/dev/null || exit 1
+
+# this check will find the timezone if /etc/localtime is a link to the right timezone file
+# or that file has been copied to /etc/localtime and not changed afterwards
+LOCALTIMESUM=`md5sum /etc/localtime | awk ' { print $1 } ' 2>/dev/null`
+find /usr/share/zoneinfo -type f -print | while read filename
+do
+ THISTIMESUM=`md5sum $filename | awk ' { print $1 } '`
+ if [ $LOCALTIMESUM = $THISTIMESUM ] ; then
+ echo $filename | cut -c21-
+ exit 0
+ fi
+done 2>/dev/null
+
+# seems we haven't found the timezone yet, let's see whether /etc/timezone has some info
+
+if [ -e /etc/timezone ]; then
+ TIMEZONE="$(head -n 1 /etc/timezone)"
+ TIMEZONE="${TIMEZONE%% *}"
+ TIMEZONE="${TIMEZONE##/}"
+ TIMEZONE="${TIMEZONE%%/}"
+ TIMEZONE="$(convert_timezone $TIMEZONE)"
+ if [ -f "/usr/share/zoneinfo/$TIMEZONE" ] ; then
+ echo $TIMEZONE
+ exit 0
+ fi
+fi
+
+exit 2
--- /dev/null
+/*
+ * Command-line utility to transmit a server command.
+ *
+ * Copyright (c) 1987-2021 by the citadel.org team
+ *
+ * This program is open source software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 3.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <string.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <ctype.h>
+#include <signal.h>
+#include <errno.h>
+#include <limits.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include "citadel.h"
+#include "citadel_dirs.h"
+#include <libcitadel.h>
+
+int serv_sock = (-1);
+
+int uds_connectsock(char *sockpath) {
+ int s;
+ struct sockaddr_un addr;
+
+ memset(&addr, 0, sizeof(addr));
+ addr.sun_family = AF_UNIX;
+ strncpy(addr.sun_path, sockpath, sizeof addr.sun_path);
+
+ s = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (s < 0) {
+ fprintf(stderr, "sendcommand: Can't create socket: %s\n", strerror(errno));
+ exit(3);
+ }
+
+ if (connect(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
+ fprintf(stderr, "sendcommand: can't connect: %s\n", strerror(errno));
+ close(s);
+ exit(3);
+ }
+
+ return s;
+}
+
+
+/*
+ * input binary data from socket
+ */
+void serv_read(char *buf, int bytes) {
+ int len, rlen;
+
+ len = 0;
+ while (len < bytes) {
+ rlen = read(serv_sock, &buf[len], bytes - len);
+ if (rlen < 1) {
+ return;
+ }
+ len = len + rlen;
+ }
+}
+
+
+/*
+ * send binary to server
+ */
+void serv_write(char *buf, int nbytes) {
+ int bytes_written = 0;
+ int retval;
+ while (bytes_written < nbytes) {
+ retval = write(serv_sock, &buf[bytes_written], nbytes - bytes_written);
+ if (retval < 1) {
+ return;
+ }
+ bytes_written = bytes_written + retval;
+ }
+}
+
+
+/*
+ * input string from socket - implemented in terms of serv_read()
+ */
+void serv_gets(char *buf) {
+ int i;
+
+ /* Read one character at a time.
+ */
+ for (i = 0;; i++) {
+ serv_read(&buf[i], 1);
+ if (buf[i] == '\n' || i == (SIZ-1))
+ break;
+ }
+
+ /* If we got a long line, discard characters until the newline.
+ */
+ if (i == (SIZ-1)) {
+ while (buf[i] != '\n') {
+ serv_read(&buf[i], 1);
+ }
+ }
+
+ /* Strip all trailing nonprintables (crlf)
+ */
+ buf[i] = 0;
+}
+
+
+/*
+ * send line to server - implemented in terms of serv_write()
+ */
+void serv_puts(char *buf) {
+ serv_write(buf, strlen(buf));
+ serv_write("\n", 1);
+}
+
+
+/*
+ * Main loop. Do things and have fun.
+ */
+int main(int argc, char **argv) {
+ int a;
+ int watchdog = 60;
+ char buf[SIZ];
+ int xfermode = 0;
+ char ctdldir[PATH_MAX]=CTDLDIR;
+
+ /* Parse command line */
+ while ((a = getopt(argc, argv, "h:w:")) != EOF) {
+ switch (a) {
+ case 'h':
+ strncpy(ctdldir, optarg, sizeof ctdldir);
+ break;
+ case 'w':
+ watchdog = atoi(optarg);
+ break;
+ default:
+ fprintf(stderr, "sendcommand: usage: sendcommand [-h server_dir] [-w watchdog_timeout]\n");
+ return(1);
+ }
+ }
+
+ fprintf(stderr, "sendcommand: started (pid=%d) connecting to Citadel server with data directory %s\n",
+ (int) getpid(),
+ ctdldir
+ );
+ fflush(stderr);
+
+ if (chdir(ctdldir) != 0) {
+ fprintf(stderr, "sendcommand: %s: %s\n", ctdldir, strerror(errno));
+ exit(errno);
+ }
+
+ alarm(watchdog);
+ serv_sock = uds_connectsock(file_citadel_admin_socket);
+ serv_gets(buf);
+ fprintf(stderr, "%s\n", buf);
+
+ strcpy(buf, "");
+ for (a=optind; a<argc; ++a) {
+ if (a != optind) {
+ strcat(buf, " ");
+ }
+ strcat(buf, argv[a]);
+ }
+
+ fprintf(stderr, "%s\n", buf);
+ serv_puts(buf);
+ serv_gets(buf);
+ fprintf(stderr, "%s\n", buf);
+
+ xfermode = buf[0];
+
+ if ((xfermode == '4') || (xfermode == '8')) { /* send text */
+ while (fgets(buf, sizeof buf, stdin) > 0) {
+ if (buf[strlen(buf)-1] == '\n') {
+ buf[strlen(buf)-1] = 0;
+ }
+ serv_puts(buf);
+ }
+ serv_puts("000");
+ }
+
+ if ((xfermode == '1') || (xfermode == '8')) { /* receive text */
+ while(serv_gets(buf), strcmp(buf, "000")) {
+ printf("%s\n", buf);
+ }
+ }
+
+ if (xfermode == '6') { /* receive binary */
+ size_t len = atoi(&buf[4]);
+ size_t bytes_remaining = len;
+
+ while (bytes_remaining > 0) {
+ size_t this_block = bytes_remaining;
+ if (this_block > SIZ) this_block = SIZ;
+ serv_read(buf, this_block);
+ fwrite(buf, this_block, 1, stdout);
+ bytes_remaining -= this_block;
+ }
+ }
+
+ close(serv_sock);
+ alarm(0); /* cancel the watchdog timer */
+
+ fprintf(stderr, "sendcommand: processing ended.\n");
+ if (xfermode == '5') {
+ return(1);
+ }
+ return(0);
+}
--- /dev/null
+// Citadel setup utility
+//
+// Copyright (c) 1987-2022 by the citadel.org team
+//
+// This program is open source software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License version 3.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+
+#define SHOW_ME_VAPPEND_PRINTF
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <signal.h>
+#include <netdb.h>
+#include <errno.h>
+#include <limits.h>
+#include <pwd.h>
+#include <time.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <assert.h>
+#include <libcitadel.h>
+#include "../server/citadel.h"
+#include "axdefs.h"
+#include "../server/sysdep.h"
+#include "../server/citadel_dirs.h"
+
+#ifdef ENABLE_NLS
+#ifdef HAVE_XLOCALE_H
+#include <xlocale.h>
+#endif
+#include <libintl.h>
+#include <locale.h>
+#define _(string) gettext(string)
+#else
+#define _(string) (string)
+#endif
+
+#define SERVICE_NAME "citadel"
+#define PROTO_NAME "tcp"
+#define NSSCONF "/etc/nsswitch.conf"
+
+typedef enum _SetupStep {
+ eCitadelHomeDir = 0,
+ eSysAdminName = 1,
+ eSysAdminPW = 2,
+ eUID = 3,
+ eIP_ADDR = 4,
+ eCTDL_Port = 5,
+ eAuthType = 6,
+ eLDAP_Host = 7,
+ eLDAP_Port = 8,
+ eLDAP_Base_DN = 9,
+ eLDAP_Bind_DN = 10,
+ eLDAP_Bind_PW = 11,
+ eMaxQuestions = 12
+} eSetupStep;
+
+///"CREATE_XINETD_ENTRY";
+/* Environment variables, don't translate! */
+const char *EnvNames [eMaxQuestions] = {
+ "HOME_DIRECTORY",
+ "SYSADMIN_NAME",
+ "SYSADMIN_PW",
+ "CITADEL_UID",
+ "IP_ADDR",
+ "CITADEL_PORT",
+ "ENABLE_UNIX_AUTH",
+ "LDAP_HOST",
+ "LDAP_PORT",
+ "LDAP_BASE_DN",
+ "LDAP_BIND_DN",
+ "LDAP_BIND_PW"
+};
+
+int setup_type = (-1);
+int enable_home = 1;
+char admin_name[SIZ];
+char admin_pass[SIZ];
+char admin_cmd[SIZ];
+int serv_sock = (-1) ;
+
+const char *setup_titles[eMaxQuestions];
+const char *setup_text[eMaxQuestions];
+
+char *program_title;
+
+void SetTitles(void) {
+ int have_run_dir;
+#ifndef HAVE_RUN_DIR
+ have_run_dir = 1;
+#else
+ have_run_dir = 0;
+#endif
+
+#ifdef ENABLE_NLS
+ setlocale(LC_MESSAGES, getenv("LANG"));
+ bindtextdomain("citadel-setup", LOCALEDIR"/locale");
+ textdomain("citadel-setup");
+ bind_textdomain_codeset("citadel-setup","UTF8");
+#endif
+
+ setup_titles[eCitadelHomeDir] = _("Citadel Home Directory");
+ if (have_run_dir)
+ setup_text[eCitadelHomeDir] = _(
+"Enter the full pathname of the directory in which the Citadel\n"
+"installation you are creating or updating resides. If you\n"
+"specify a directory other than the default, you will need to\n"
+"specify the -h flag to the server when you start it up.\n");
+ else
+ setup_text[eCitadelHomeDir] = _(
+"Enter the subdirectory name for an alternate installation of "
+"Citadel. To do a default installation just leave it blank."
+"If you specify a directory other than the default, you will need to\n"
+"specify the -h flag to the server when you start it up.\n"
+"note that it may not have a leading /");
+
+ setup_titles[eSysAdminName] = _("Citadel administrator username:");
+ setup_text[eSysAdminName] = _(
+"Please enter the name of the Citadel user account that should be granted "
+"administrative privileges once created. If using internal authentication "
+"this user account will be created if it does not exist. For external "
+"authentication this user account has to exist.");
+
+ setup_titles[eSysAdminPW] = _("Administrator password:");
+ setup_text[eSysAdminPW] = _(
+"Enter a password for the system administrator. When setup\n"
+"completes it will attempt to create the administrator user\n"
+"and set the password specified here.\n");
+
+ setup_titles[eUID] = _("Citadel User ID:");
+ setup_text[eUID] = _(
+"Citadel needs to run under its own user ID. This would\n"
+"typically be called \"citadel\", but if you are running Citadel\n"
+"as a public site, you might also call it \"bbs\" or \"guest\".\n"
+"The server will run under this user ID. Please specify that\n"
+"user ID here. You may specify either a user name or a numeric\n"
+"UID.\n");
+
+ setup_titles[eIP_ADDR] = _("Listening address for the Citadel server:");
+ setup_text[eIP_ADDR] = _(
+"Please specify the IP address which the server should be listening to. "
+"You can name a specific IPv4 or IPv6 address, or you can specify\n"
+"\"*\" for \"any address\", \"::\" for \"any IPv6 address\", or \"0.0.0.0\"\n"
+"for \"any IPv4 address\". If you leave this blank, Citadel will\n"
+"listen on all addresses. "
+"This can usually be left to the default unless multiple instances of Citadel "
+"are running on the same computer.");
+
+ setup_titles[eCTDL_Port] = _("Server port number:");
+ setup_text[eCTDL_Port] = _(
+"Specify the TCP port number on which your server will run.\n"
+"Normally, this will be port 504, which is the official port\n"
+"assigned by the IANA for Citadel servers. You will only need\n"
+"to specify a different port number if you run multiple instances\n"
+"of Citadel on the same computer and there is something else\n"
+"already using port 504.\n");
+
+ setup_titles[eAuthType] = _("Authentication method to use:");
+ setup_text[eAuthType] = _(
+"Please choose the user authentication mode. By default Citadel will use its "
+"own internal user accounts database. If you choose Host, Citadel users will "
+"have accounts on the host system, authenticated via /etc/passwd or a PAM "
+"source. LDAP chooses an RFC 2307 compliant directory server, the last option "
+"chooses the nonstandard MS Active Directory LDAP scheme."
+"\n"
+"Do not change this option unless you are sure it is required, since changing "
+"back requires a full reinstall of Citadel."
+"\n"
+" 0. Self contained authentication\n"
+" 1. Host system integrated authentication\n"
+" 2. External LDAP - RFC 2307 POSIX schema\n"
+" 3. External LDAP - MS Active Directory schema\n"
+"\n"
+"For help: http://www.citadel.org/doku.php/faq:installation:authmodes\n"
+"\n"
+"ANSWER \"0\" UNLESS YOU COMPLETELY UNDERSTAND THIS OPTION.\n");
+
+ setup_titles[eLDAP_Host] = _("LDAP host:");
+ setup_text[eLDAP_Host] = _(
+"Please enter the host name or IP address of your LDAP server.\n");
+
+ setup_titles[eLDAP_Port] = _("LDAP port number:");
+ setup_text[eLDAP_Port] = _(
+"Please enter the port number of the LDAP service (usually 389).\n");
+
+ setup_titles[eLDAP_Base_DN] = _("LDAP base DN:");
+ setup_text[eLDAP_Base_DN] = _(
+"Please enter the Base DN to search for authentication\n"
+"(for example: dc=example,dc=com)\n");
+
+ setup_titles[eLDAP_Bind_DN] = _("LDAP bind DN:");
+ setup_text[eLDAP_Bind_DN] = _(
+"Please enter the DN of an account to use for binding to the LDAP server for "
+"performing queries. The account does not require any other privileges. If "
+"your LDAP server allows anonymous queries, you can leave this blank.\n");
+
+ setup_titles[eLDAP_Bind_PW] = _("LDAP bind password:");
+ setup_text[eLDAP_Bind_PW] = _(
+"If you entered a Bind DN in the previous question, you must now enter\n"
+"the password associated with that account. Otherwise, you can leave this\n"
+"blank.\n");
+
+#if 0
+// Debug loading of locales... Strace does a better job though.
+ printf("Message catalog directory: %s\n", bindtextdomain("citadel-setup", LOCALEDIR"/locale"));
+ printf("Text domain: %s\n", textdomain("citadel-setup"));
+ printf("Text domain Charset: %s\n", bind_textdomain_codeset("citadel-setup","UTF8"));
+ {
+ int i;
+ for (i = 0; i < eMaxQuestions; i++)
+ printf("%s - %s\n", setup_titles[i], _(setup_titles[i]));
+ exit(0);
+ }
+#endif
+}
+
+
+void title(const char *text) {
+ printf("\n\033[1m\033[32m<\033[33m%s\033[32m>\033[0m\n", text);
+}
+
+
+int yesno(const char *question, int default_value) {
+ int answer = 0;
+ char buf[SIZ];
+
+ do {
+ printf("%s\n%s [%s] --> ", question, _("Yes/No"), ( default_value ? _("Yes") : _("No") ));
+ if (fgets(buf, sizeof buf, stdin)) {
+ answer = tolower(buf[0]);
+ if ((buf[0]==0) || (buf[0]==13) || (buf[0]==10)) {
+ answer = default_value;
+ }
+ else if (answer == 'y') {
+ answer = 1;
+ }
+ else if (answer == 'n') {
+ answer = 0;
+ }
+ }
+ } while ((answer < 0) || (answer > 1));
+ return (answer);
+}
+
+
+void important_message(const char *title, const char *msgtext) {
+ char buf[SIZ];
+
+ printf("\n%s\n%s\n\n", title, msgtext);
+ printf("%s", _("Press return to continue..."));
+ if (fgets(buf, sizeof buf, stdin)) {
+ ;
+ }
+}
+
+
+void important_msgnum(int msgnum) {
+ important_message(_("Important Message"), setup_text[msgnum]);
+}
+
+
+void display_error(char *error_message_format, ...) {
+ StrBuf *Msg;
+ va_list arg_ptr;
+
+ Msg = NewStrBuf();
+ va_start(arg_ptr, error_message_format);
+ StrBufVAppendPrintf(Msg, error_message_format, arg_ptr);
+ va_end(arg_ptr);
+
+ important_message(_("Error"), ChrPtr(Msg));
+ FreeStrBuf(&Msg);
+}
+
+
+void progress(char *text, long int curr, long int cmax) {
+ long a = 0;
+ long i = 0;
+
+ if (curr == 0) {
+ printf("%s\n", text);
+ printf("\033[1m\033[33m[\033[32m............................................................................\033[33m]\033[0m\r");
+ }
+ else if (curr == cmax) {
+ printf("\r%79s\n", "");
+ }
+ else {
+ printf("\033[1m\033[33m[\033[32m");
+ a = (curr * 100) / cmax;
+ a = a * 76;
+ a = a / 100;
+ for (i=0; i<a; ++i) {
+ printf("*");
+ }
+ printf("\033[0m\r");
+ }
+ fflush(stdout);
+}
+
+
+int uds_connectsock(char *sockpath) {
+ int s;
+ struct sockaddr_un addr;
+
+ memset(&addr, 0, sizeof(addr));
+ addr.sun_family = AF_UNIX;
+ strcpy(addr.sun_path, sockpath);
+
+ s = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (s < 0) {
+ return(-1);
+ }
+
+ if (connect(s, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
+ close(s);
+ return(-1);
+ }
+
+ return s;
+}
+
+
+// input binary data from socket
+void serv_read(char *buf, int bytes) {
+ int len, rlen;
+
+ len = 0;
+ while (len < bytes) {
+ rlen = read(serv_sock, &buf[len], bytes - len);
+ if (rlen < 1) {
+ return;
+ }
+ len = len + rlen;
+ }
+}
+
+
+// send binary to server
+void serv_write(char *buf, int nbytes) {
+ int bytes_written = 0;
+ int retval;
+ while (bytes_written < nbytes) {
+ retval = write(serv_sock, &buf[bytes_written], nbytes - bytes_written);
+ if (retval < 1) {
+ return;
+ }
+ bytes_written = bytes_written + retval;
+ }
+}
+
+
+// input string from socket - implemented in terms of serv_read()
+void serv_gets(char *buf) {
+ int i;
+
+ // Read one character at a time.
+ for (i = 0;; i++) {
+ serv_read(&buf[i], 1);
+ if (buf[i] == '\n' || i == (SIZ-1))
+ break;
+ }
+
+ // If we got a long line, discard characters until the newline.
+ if (i == (SIZ-1)) {
+ while (buf[i] != '\n') {
+ serv_read(&buf[i], 1);
+ }
+ }
+
+ // Strip all trailing nonprintables (crlf)
+ buf[i] = 0;
+}
+
+
+// send line to server - implemented in terms of serv_write()
+void serv_puts(char *buf) {
+ serv_write(buf, strlen(buf));
+ serv_write("\n", 1);
+}
+
+
+// Convenience functions to get/set system configuration entries
+void getconf_str(char *buf, char *key) {
+ char cmd[SIZ];
+ char ret[SIZ];
+
+ sprintf(cmd, "CONF GETVAL|%s", key);
+ serv_puts(cmd);
+ serv_gets(ret);
+ if (ret[0] == '2') {
+ extract_token(buf, &ret[4], 0, '|', SIZ);
+ }
+ else {
+ strcpy(buf, "");
+ }
+}
+
+
+int getconf_int(char *key) {
+ char buf[SIZ];
+ getconf_str(buf, key);
+ return atoi(buf);
+}
+
+
+void setconf_str(char *key, char *val) {
+ char buf[SIZ];
+
+ sprintf(buf, "CONF PUTVAL|%s|%s", key, val);
+ serv_puts(buf);
+ serv_gets(buf);
+}
+
+
+void setconf_int(char *key, int val) {
+ char buf[SIZ];
+
+ sprintf(buf, "CONF PUTVAL|%s|%d", key, val);
+ serv_puts(buf);
+ serv_gets(buf);
+}
+
+
+// On systems which use xinetd, see if we can offer to install Citadel as
+// the default telnet target.
+void check_xinetd_entry(void) {
+ char *filename = "/etc/xinetd.d/telnet";
+ FILE *fp;
+ char buf[SIZ];
+ int already_citadel = 0;
+ int rv;
+
+ fp = fopen(filename, "r+");
+ if (fp == NULL) return; // Not there. Oh well...
+
+ while (fgets(buf, sizeof buf, fp) != NULL) {
+ if (strstr(buf, "/citadel") != NULL) {
+ already_citadel = 1;
+ }
+ }
+ fclose(fp);
+ if (already_citadel) return; // Already set up this way.
+
+ // Otherwise, prompt the user to create an entry.
+ if (getenv("CREATE_XINETD_ENTRY") != NULL) {
+ if (strcasecmp(getenv("CREATE_XINETD_ENTRY"), "yes")) {
+ return;
+ }
+ }
+ else {
+ snprintf(buf, sizeof buf,
+ _("Setup can configure the \"xinetd\" service to automatically\n"
+ "connect incoming telnet sessions to Citadel, bypassing the\n"
+ "host system login: prompt. Would you like to do this?\n"
+ )
+ );
+ if (yesno(buf, 1) == 0) {
+ return;
+ }
+ }
+
+ fp = fopen(filename, "w");
+ fprintf(fp,
+ "# description: telnet service for Citadel users\n"
+ "service telnet\n"
+ "{\n"
+ " disable = no\n"
+ " flags = REUSE\n"
+ " socket_type = stream\n"
+ " wait = no\n"
+ " user = root\n"
+ " server = /usr/sbin/in.telnetd\n"
+ " server_args = -h -L %s/citadel\n"
+ " log_on_failure += USERID\n"
+ "}\n",
+ ctdl_bin_dir
+ );
+ fclose(fp);
+
+ // Now try to restart the service. This will not have the intended effect on Solaris, but who uses Solaris anymore?
+ rv = system("systemctl restart xinetd >/dev/null 2>&1");
+ if (rv != 0) {
+ rv = system("service xinetd restart >/dev/null 2>&1");
+ }
+ if (rv != 0) {
+ display_error(_("failed to restart xinetd.\n"));
+ }
+}
+
+
+void strprompt(const char *prompt_title, const char *prompt_text, char *Target, char *DefValue) {
+ char buf[SIZ] = "";
+ char setupmsg[SIZ];
+
+ strcpy(setupmsg, "");
+
+ title(prompt_title);
+ printf("\n%s\n", prompt_text);
+ printf("%s\n%s\n", _("This is currently set to:"), Target);
+ printf("%s\n", _("Enter new value or press return to leave unchanged:"));
+ if (fgets(buf, sizeof buf, stdin)) {
+ buf[strlen(buf) - 1] = 0;
+ }
+ if (!IsEmptyStr(buf)) {
+ strcpy(Target, buf);
+ }
+}
+
+
+void set_bool_val(int msgpos, int *ip, char *DefValue) {
+ title(setup_titles[msgpos]);
+ *ip = yesno(setup_text[msgpos], *ip);
+}
+
+
+void set_str_val(int msgpos, char *Target, char *DefValue)
+{
+ strprompt(setup_titles[msgpos],
+ setup_text[msgpos],
+ Target,
+ DefValue
+ );
+}
+
+
+// like set_str_val() but for numeric values
+void set_int_val(int msgpos, int *target, char *default_value) {
+ char buf[32];
+ sprintf(buf, "%d", *target);
+ do {
+ set_str_val(msgpos, buf, default_value);
+ } while ( (strcmp(buf, "0")) && (atoi(buf) == 0) );
+ *target = atoi(buf);
+}
+
+
+void edit_value(int curr) {
+ struct passwd *pw = NULL;
+ char ctdluidname[256];
+ char buf[SIZ];
+ char *default_value = NULL;
+ int ctdluid = 0;
+ int portnum = 0;
+ int auth = 0;
+ int lportnum = 0;
+
+ if (default_value == NULL) {
+ default_value = "";
+ }
+
+ switch (curr) {
+
+ case eSysAdminName:
+ getconf_str(admin_name, "c_sysadm");
+ set_str_val(curr, admin_name, default_value);
+ setconf_str("c_sysadm", admin_name);
+ break;
+
+ case eSysAdminPW:
+ set_str_val(curr, admin_pass, default_value);
+ break;
+
+ case eUID:
+ ctdluid = getconf_int("c_ctdluid");
+ pw = getpwuid(ctdluid);
+ if (pw == NULL) {
+ set_int_val(curr, &ctdluid, default_value);
+ }
+ else {
+ strcpy(ctdluidname, pw->pw_name);
+ set_str_val(curr, ctdluidname, default_value);
+ pw = getpwnam(ctdluidname);
+ if (pw != NULL) {
+ ctdluid = pw->pw_uid;
+ }
+ else if (atoi(ctdluidname) > 0) {
+ ctdluid = atoi(ctdluidname);
+ }
+ }
+ setconf_int("c_ctdluid", ctdluid);
+ break;
+
+ case eIP_ADDR:
+ getconf_str(buf, "c_ip_addr");
+ set_str_val(curr, buf, default_value);
+ setconf_str("c_ip_addr", buf);
+ break;
+
+ case eCTDL_Port:
+ portnum = getconf_int("c_port_number");
+ set_int_val(curr, &portnum, default_value);
+ setconf_int("c_port_number", portnum);
+ break;
+
+ case eAuthType:
+ auth = getconf_int("c_auth_mode");
+ set_int_val(curr, &auth, default_value);
+ setconf_int("c_auth_mode", auth);
+ break;
+
+ case eLDAP_Host:
+ getconf_str(buf, "c_ldap_host");
+ if (IsEmptyStr(buf)) {
+ strcpy(buf, "localhost");
+ }
+ set_str_val(curr, buf, default_value);
+ setconf_str("c_ldap_host", buf);
+ break;
+
+ case eLDAP_Port:
+ lportnum = getconf_int("c_ldap_port");
+ if (lportnum == 0) {
+ lportnum = 389;
+ }
+ set_int_val(curr, &lportnum, default_value);
+ setconf_int("c_ldap_port", lportnum);
+ break;
+
+ case eLDAP_Base_DN:
+ getconf_str(buf, "c_ldap_base_dn");
+ set_str_val(curr, buf, default_value);
+ setconf_str("c_ldap_base_dn", buf);
+ break;
+
+ case eLDAP_Bind_DN:
+ getconf_str(buf, "c_ldap_bind_dn");
+ set_str_val(curr, buf, default_value);
+ setconf_str("c_ldap_bind_dn", buf);
+ break;
+
+ case eLDAP_Bind_PW:
+ getconf_str(buf, "c_ldap_bind_pw");
+ set_str_val(curr, buf, default_value);
+ setconf_str("c_ldap_bind_pw", buf);
+ break;
+ }
+}
+
+
+// Messages that are no longer in use.
+// We keep them here so we don't lose the translations if we need them later.
+#if 0
+important_message(_("Setup finished"),
+_("Setup of the Citadel server is complete.\n"
+"If you will be using WebCit, please run its\n"
+"setup program now; otherwise, run './citadel'\n"
+"to log in.\n"));
+important_message(_("Setup failed"),
+_("Setup is finished, but the Citadel server failed to start.\n"
+"Go back and check your configuration.\n");
+important_message(_("Setup finished"),
+_("Setup is finished. You may now start the server."));
+#endif
+
+
+int main(int argc, char *argv[]) {
+ int a, i;
+ int curr;
+ char buf[1024];
+ char aaa[128];
+ char ctdldir[PATH_MAX]=CTDLDIR;
+ struct passwd *pw;
+ gid_t gid;
+ char *activity = NULL;
+
+ // Keep a mild groove on
+ program_title = _("Citadel setup program");
+
+ // set an invalid setup type
+ setup_type = (-1);
+
+ // parse command line args
+ for (a = 0; a < argc; ++a) {
+ if (!strncmp(argv[a], "-u", 2)) {
+ strcpy(aaa, argv[a]);
+ strcpy(aaa, &aaa[2]);
+ setup_type = atoi(aaa);
+ }
+ else if (!strncmp(argv[a], "-h", 2)) {
+ safestrncpy(ctdldir, &argv[a][2], sizeof ctdldir);
+ }
+ }
+
+ if (chdir(ctdldir) != 0) {
+ fprintf(stderr, "sendcommand: %s: %s\n", ctdldir, strerror(errno));
+ exit(errno);
+ }
+
+ SetTitles();
+
+ // Connect to the running Citadel server.
+ char *connectingmsg = _("Connecting to Citadel server");
+ for (i=0; ((i<30) && (serv_sock < 0)) ; ++i) { // wait for server to start up
+ progress(connectingmsg, i, 30);
+ serv_sock = uds_connectsock(file_citadel_admin_socket);
+ sleep(1);
+ }
+ progress(connectingmsg, 30, 30);
+
+ if (serv_sock < 0) {
+ display_error(
+ "%s: %s %s\n",
+ _("Setup could not connect to a running Citadel server."),
+ strerror(errno), file_citadel_admin_socket
+ );
+ exit(1);
+ }
+
+ // read the server greeting
+ serv_gets(buf);
+ if (buf[0] != '2') {
+ display_error("%s\n", buf);
+ exit(2);
+ }
+
+ // Are we connected to the correct Citadel server?
+ serv_puts("INFO");
+ serv_gets(buf);
+ if (buf[0] != '1') {
+ display_error("%s\n", buf);
+ exit(3);
+ }
+ a = 0;
+ while (serv_gets(buf), strcmp(buf, "000")) {
+ if (a == 5) {
+ if (atoi(buf) != REV_LEVEL) {
+ display_error("%s\n",
+ _("Your setup program and Citadel server are from different versions.")
+ );
+ exit(4);
+ }
+ }
+ ++a;
+ }
+
+ printf("\n\n\n *** %s ***\n\n", program_title);
+
+ // Go through a series of dialogs prompting for config info
+ for (curr = 1; curr < eMaxQuestions; ++curr) {
+ edit_value(curr);
+
+ if ( (curr == eAuthType)
+ && (getconf_int("c_auth_mode") != AUTHMODE_LDAP)
+ && (getconf_int("c_auth_mode") != AUTHMODE_LDAP_AD)
+ ) {
+ curr += 5; // skip LDAP questions if we're not authenticating against LDAP
+ }
+
+ if (curr == eSysAdminName) {
+ if (getconf_int("c_auth_mode") == AUTHMODE_NATIVE) { // for native auth mode, fetch the admin's existing pw
+ snprintf(buf, sizeof buf, "AGUP %s", admin_name);
+ serv_puts(buf);
+ serv_gets(buf);
+ if (buf[0] == '2') {
+ extract_token(admin_pass, &buf[4], 1, '|', sizeof admin_pass);
+ }
+ }
+ else {
+ ++curr; // skip the password question for non-native auth modes
+ }
+ }
+ }
+
+ if ((pw = getpwuid( getconf_int("c_ctdluid") )) == NULL) {
+ gid = getgid();
+ }
+ else {
+ gid = pw->pw_gid;
+ }
+
+ // setup now must be run after Citadel Server is already running, so we don't need this anymore.
+ //if (create_run_directories(getconf_int("c_ctdluid"), gid) != 0) {
+ //display_error("%s\n", _("failed to create directories"));
+ //}
+
+ activity = _("Reconfiguring Citadel server");
+ progress(activity, 0, 5);
+ sleep(1); // Let the message appear briefly
+
+ // Create the administrator account. It's ok if the command fails if this user already exists.
+ if (getconf_int("c_auth_mode") == AUTHMODE_NATIVE) {
+ progress(activity, 1, 5);
+ snprintf(buf, sizeof buf, "CREU %s|%s", admin_name, admin_pass);
+ serv_puts(buf);
+ progress(activity, 2, 5);
+ serv_gets(buf);
+ }
+ progress(activity, 3, 5);
+
+ // Assign the desired password and access level to the administrator account.
+ if (getconf_int("c_auth_mode") == AUTHMODE_NATIVE) {
+ snprintf(buf, sizeof buf, "AGUP %s", admin_name);
+ serv_puts(buf);
+ progress(activity, 4, 5);
+ serv_gets(buf);
+ if (buf[0] == '2') {
+ int admin_flags = extract_int(&buf[4], 2);
+ int admin_times_called = extract_int(&buf[4], 3);
+ int admin_msgs_posted = extract_int(&buf[4], 4);
+ snprintf(buf, sizeof buf, "ASUP %s|%s|%d|%d|%d|6",
+ admin_name, admin_pass, admin_flags, admin_times_called, admin_msgs_posted
+ );
+ serv_puts(buf);
+ serv_gets(buf);
+ }
+ }
+ progress(activity, 5, 5);
+
+ check_xinetd_entry(); // Check /etc/xinetd.d/telnet
+
+ // Restart citserver
+ activity = _("Restarting Citadel server to apply changes");
+ progress(activity, 0, 51);
+
+ serv_puts("TIME");
+ serv_gets(buf);
+ long original_start_time = extract_long(&buf[4], 3);
+
+ progress(activity, 1, 51);
+ serv_puts("DOWN 1");
+ progress(activity, 2, 51);
+ serv_gets(buf);
+ if (buf[0] != '2') {
+ display_error("%s\n", buf);
+ exit(6);
+ }
+
+ close(serv_sock);
+ serv_sock = (-1);
+
+ for (i=3; i<=6; ++i) { // wait for server to shut down
+ progress(activity, i, 51);
+ sleep(1);
+ }
+
+ for (i=7; ((i<=48) && (serv_sock < 0)) ; ++i) { // wait for server to start up
+ progress(activity, i, 51);
+ serv_sock = uds_connectsock(file_citadel_admin_socket);
+ sleep(1);
+ }
+
+ progress(activity, 49, 51);
+ serv_gets(buf);
+
+ progress(activity, 50, 51);
+ serv_puts("TIME");
+ serv_gets(buf);
+ long new_start_time = extract_long(&buf[4], 3);
+
+ close(serv_sock);
+ progress(activity, 51, 51);
+
+ if ((original_start_time == new_start_time) || (new_start_time <= 0)) {
+ display_error("%s\n", _("Setup failed to restart Citadel server. Please restart it manually."));
+ exit(7);
+ }
+
+ exit(0);
+ return 0;
+}
projects / citadel.git / commitdiff