WEBCIT for the Citadel System
- version 6.25
+ version 7.11
- Copyright (C) 1996-2005 by the authors. Portions written by:
+ Copyright (C) 1996-2007 by the authors. Portions written by:
Art Cancro
- Nathan Bryant
Wilifried Goesgens
+ Nathan Bryant
Nick Grossman
Andru Luvisi
+ Alessandro Fulciniti
Dave Lindquist
+ Matt Pfleger
Martin Mouritzen
This program is open source software released under the terms of the GNU
- General Public License. Please read COPYING.txt for more licensing
- information.
+ General Public License, version 3. Please read COPYING.txt for more
+ licensing information.
WebCit bundles the Prototype JavaScript Framework, writen by Sam
Stephenson [http://prototype.conio.net]. These components are licensed to
is licensed to you under the terms of the GNU Lesser General Public
License.
+ WebCit bundles the Nifty Corners library, written by Alessandro Fulciniti
+ [http://cerca.html.it/cgi-bin/cerca.cgi?q=nifty+corners]. This component
+ is licensed to you under the terms of the GNU General Public License.
+
The Citadel logo was designed by Lisa Aurigemma.
INTRODUCTION
------------
- Citadel is a sophisticated groupware and BBS package which allows multiple
+ Citadel is a sophisticated groupware platform which allows multiple
users to simultaneously access the system using a variety of user interfaces.
This package (WebCit) is a "middleware" package which presents an HTML/HTTP
user interface to the Citadel system.
Unline some web-based packages, WebCit contains its own standalone HTTP
engine. As a result, you can get it running quickly without all that tedious
mucking about with Apache configuration files and directories. WebCit is not
-intended to replace your Apache server, however -- it *only* provides a front
-end to Citadel. If you do not have another web server running, you may run
-WebCit on port 80; however, in the more likely situation that you have Apache
-or some other web server listening on port 80, you must run WebCit on another
-port. The default is port 2000.
+intended to be a general-purpose web server, however -- it *only* provides a
+front end to Citadel. If you do not have another web server running, you may
+run WebCit on port 80; however, if you have Apache or some other web server
+listening on port 80, you must run WebCit on another port. If you do not
+specify a port number, WebCit will bind to port 2000.
To compile from source, enter the usual commands:
./configure --prefix=/usr/local/webcit [or whatever directory you prefer]
make
make install
+ Package/Ports Maintainers: to make webcit fit smart into LHFS-ified systems
+ read on at the end of this file, Advanced configure options.
+
Then to initialize it:
cd /usr/local/webcit
./setup
After running setup, you just point your web browser to whatever port you
specified, such as:
+ http://your.host.name
+
+ (or if you specified some other port, such as 2000 in this example...)
+
http://your.host.name:2000
...and log in.
the "webserver" program:
webserver [-i ip_addr] [-p http_port] [-s] [-t tracefile]
- [-c] [remotehost [remoteport]]
+ [-c] [-f] [remotehost [remoteport]]
*or*
webserver [-i ip_addr] [-p http_port] [-s] [-t tracefile]
- [-c] uds /your/citadel/directory
+ [-c] [-f] uds /your/citadel/directory
Explained:
You can leave this out, in which case WebCit will listen on all
available network interfaces. Normally this will be the case, but if
you are running multiple Citadel systems on one host, it can be useful.
+ You can also use this option to run Apache and WebCit on different IP
+ addresses instead of different ports, if you have them available.
-> http_port: the TCP port on which you wish your WebCit server to run. If
you are installing WebCit on a dedicated server, you can use the
standard port 80. Otherwise, if port 80 is already occupied by some
other web service (probably Apache), then you'll need to select a
different port. If you do not specify a port number, WebCit will attempt
- to use port 2000.
+ to use port 80.
-> tracefile: where you want WebCit to log to. This can be a file, a
virtual console, or /dev/null to suppress logging altogether.
-> The "-s" option causes WebCit to present an HTTPS (SSL-encrypted) web
service. If you want to do both HTTP and HTTPS, you can simply run two
instances of WebCit on two different ports.
+
+ -> The "-f" option tells WebCit that it is allowed to follow the
+ "X-Forwarded-For:" HTTP headers which may be added if your WebCit service
+ is sitting behind a front end proxy. This will allow users in your "Who
+ is online?" list to appear as connecting from their actual host address
+ instead of the address of the proxy. In addition, the
+ "X-Forwarded-Host:" header from the front end proxy will also be honored,
+ which will help to make automatically generated absolute URL's (for
+ things like GroupDAV and mailing list subscriptions) correct.
-> remotehost: the name or IP address of the host on which your Citadel
server is running. The default is "localhost".
If you would like to deploy a "favicon.ico" graphic, please put it in
the static/ directory. WebCit will properly serve it from there.
+
+ CUSTOMIZATION
+ -------------
+
+ The default WebCit installation will create an empty directory called
+"static.local". In this directory you may place a file called "webcit.css"
+which, if present, is referenced *after* the default stylesheet. If you
+know CSS and wish to customize your WebCit installation, any styles you
+declare in static.local/webcit.css will override the styles found in
+static/webcit.css -- and your customizations will not be overwritten when
+you upgrade WebCit later.
+
+ You may also place other files, such as images, in static.local for
+further customization.
+
CALENDAR SERVICE
----------------
WebCit contains support for calendaring and scheduling. In order to use it
-you must have libical v0.24 (or newer) on your system. You must also be
+you must have libical v0.26 (or newer) on your system. You must also be
running a Citadel server with calendaring support. The calendar service will
be automatically configured and installed if your host system supports it.
- WebCit also provides Kolab-compatible free/busy data for calendar clients.
-Unlike the Kolab server, however, there is no need for each user to "publish"
+ WebCit also provides iCalendar format free/busy data for calendar clients.
+Unlike with some other servers, there is no need for each user to "publish"
free/busy data -- it is generated on-the-fly from the server-side calendar
-of the user being queried. Note: in order to support Kolab clients, you must
-have WebCit running in HTTPS mode on port 443, because that is what Kolab
-clients will be expecting.
+of the user being queried.
HTTPS (encryption) SUPPORT
It is up to you to decide whether to use an automatically generated,
self-signed certificate, or purchase a certificate signed by a well known
authority.
+
+
+ INTEGRATING INTO APACHE
+ -----------------------
+
+ It is best to run WebCit natively on its own HTTP port. If, however, you wish
+to have WebCit run as part of an Apache web server installation (for example,
+you only have one IP address and you need to stay on port 80 or 443 in order to
+maintain compatibility with corporate firewall policy), you can do this with
+the "mod_proxy" Apache module.
+
+ The preferred way to do this is to configure a NameVirtualHost for your WebCit
+installation (for example, http://webcit.example.com) and then proxy that
+virtual host through to WebCit. The alternative way, which does work but is not
+quite as robust, is to "mount" the WebCit paths as directory aliases to your
+main document root.
+
+Here is how to configure the NameVirtualHost method:
+
+<VirtualHost mydomain.com:443>
+ #here some of your config stuff like logging, serveradmin...
+ NameVirtualHost www.mydomain.com
+ <location />
+ allow from all
+ </location>
+ ProxyPass / http://127.0.0.1:2000/
+ ProxyPassReverse / http://127.0.0.1:2000/
+# The following line is optional. It allows WebCit's static content
+# such as images to be served directly by Apache.
+ alias /static /var/lib/citadel/www/static
+</VirtualHost>
+
+Here is how to configure the "subdirectory" method:
+
+<VirtualHost mydomain.com:443>
+ #here some of your config stuff like logging, serveradmin...
+ NameVirtualHost www.mydomain.com
+ <location /webcit>
+ allow from all
+ </location>
+ <location /listsub>
+ allow from all
+ </location>
+ <location /groupdav>
+ allow from all
+ </location>
+ <location /who_inner_html>
+ allow from all
+ </location>
+
+ ProxyPass /webcit/ http://127.0.0.1:2000/webcit/
+ ProxyPassReverse /webcit/ http://127.0.0.1:2000/webcit/
+ ProxyPass /listsub/ http://127.0.0.1:2000/listsub/
+ ProxyPassReverse /listsub/ http://127.0.0.1:2000/listsub/
+ ProxyPass /groupdav/ http://127.0.0.1:2000/groupdav/
+ ProxyPassReverse /groupdav/ http://127.0.0.1:2000/groupdav/
+ ProxyPass /who_inner_html http://127.0.0.1:2000/who_inner_html
+ ProxyPassReverse /who_inner_html http://127.0.0.1:2000/who_inner_html
+# The following line is optional. It allows WebCit's static content
+# such as images to be served directly by Apache.
+ alias /static /var/lib/citadel/www/static
+</VirtualHost>
+
+ ADVANCED CONFIGURE OPTIONS
+ --------------------------
+If you are building packages and prefer not to have WebCit reside entirely in
+a single directory, there are several compile-time options available.
+
+--with-wwwdir defines where webcit should locate and search its templates and images.
+--with-localedir defines where to put webcits locale files.
+
+Also, there are possibilities to load the TinyMCE editor into a system-wide location. WebCit
+uses this standard component to compose its messages for messages and postings. Several WebCit installations
+that may differ in design but use the same TinyMCE (which is the default that WebCit ships with)
+(set --with-editordir for that, it defaults to the dir the templates go)
+
+Install targets have diversified to reflect these changes too:
+ (make install-.....)
+locale: the webcit .mo files for gettext & locales.
+tinymce: the editor. if your system brings one, just ommit this.
+wwwdata: our templates.
+setupbin: if you want to use webcits setup facility... but isn't needed in case you provide own init & config scripts.
+bin: the binaries.
+
+
CONCLUSION
----------
That's all you need to know to get started. If you have any questions or
comments, please visit UNCENSORED! BBS, the home of Citadel, at
-uncensored.citadel.org.
+http://uncensored.citadel.org - and go to the "Citadel Support" room.
+
+
projects / citadel.git / blobdiff