+++ /dev/null
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/config.h.in $(top_srcdir)/configure depcomp \
- install-sh missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(docdir)"
-DATA = $(dist_doc_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EXEEXT = @EXEEXT@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = src
-dist_doc_DATA = README
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: $(am__configure_deps)
- ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-install-dist_docDATA: $(dist_doc_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
- @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
- done
-
-uninstall-dist_docDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- test -n "$$files" || exit 0; \
- echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(docdir)" && rm -f $$files
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
- -exec chmod u+rwx,go+rx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
-
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA) config.h
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(docdir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-dist_docDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-dist_docDATA
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
- ctags-recursive install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
- distclean distclean-generic distclean-hdr distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dist_docDATA install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
- tags-recursive uninstall uninstall-am uninstall-dist_docDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar*)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- tar*)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case $firstarg in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case $firstarg in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-bin_PROGRAMS = ctdlsh$(EXEEXT)
-subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_ctdlsh_OBJECTS = main.$(OBJEXT) sockets.$(OBJEXT) \
- datetime.$(OBJEXT) passwd.$(OBJEXT) shutdown.$(OBJEXT) \
- who.$(OBJEXT)
-ctdlsh_OBJECTS = $(am_ctdlsh_OBJECTS)
-ctdlsh_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(ctdlsh_SOURCES)
-DIST_SOURCES = $(ctdlsh_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EXEEXT = @EXEEXT@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-ctdlsh_SOURCES = main.c sockets.c ctdlsh.h datetime.c passwd.c shutdown.c who.c
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-ctdlsh$(EXEEXT): $(ctdlsh_OBJECTS) $(ctdlsh_DEPENDENCIES)
- @rm -f ctdlsh$(EXEEXT)
- $(LINK) $(ctdlsh_OBJECTS) $(ctdlsh_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/datetime.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/passwd.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/shutdown.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sockets.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/who.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-binPROGRAMS
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
int cmd_passwd(int, char *);
int cmd_shutdown(int, char *);
int cmd_who(int, char *);
+int cmd_export(int, char *);
--- /dev/null
+/*
+ * (c) 2009-2014 by Art Cancro and citadel.org
+ * This program is released under the terms of the GNU General Public License v3.
+ */
+
+#include "ctdlsh.h"
+
+int cmd_export(int server_socket, char *cmdbuf) {
+ char buf[1024];
+ char export_file_name[1024];
+
+ strcpy(export_file_name, &cmdbuf[7]);
+ if (strlen(export_file_name) == 0) {
+ strncpy(export_file_name, readline("Enter export file name: "), sizeof export_file_name);
+ }
+
+ sock_printf(server_socket, "MIGR export\n");
+ sock_getln(server_socket, buf, sizeof buf);
+
+ if (buf[0] != '1') {
+ fprintf(stderr, "%s\n", &buf[4]);
+ return(cmdret_error);
+ }
+
+ while (sock_getln(server_socket, buf, sizeof buf), strcmp(buf, "000")) {
+
+ if (!strncmp(buf, "<progress>", 10)) {
+ fprintf(stderr, "%s\n", buf);
+ }
+ }
+
+
+
+ return(cmdret_ok);
+}
+
+
+
+
COMMAND commands[] = {
{ "?", cmd_help, "Display this message" },
{ "help", cmd_help, "Display this message" },
- { "quit", cmd_quit, "Quit using ctdlsh" },
- { "exit", cmd_quit, "Quit using ctdlsh" },
{ "date", cmd_datetime, "Print the server's date and time" },
+ { "exit", cmd_quit, "Quit using ctdlsh" },
+ { "export", cmd_export, "Export all Citadel databases" },
+ { "shutdown", cmd_shutdown, "Shut down the Citadel server" },
{ "time", cmd_datetime, "Print the server's date and time" },
{ "passwd", cmd_passwd, "Set or change an account password" },
+ { "quit", cmd_quit, "Quit using ctdlsh" },
{ "who", cmd_who, "Display a list of online users" },
- { "shutdown", cmd_shutdown, "Shut down the Citadel server" },
{ NULL, NULL, NULL }
};
projects / citadel.git / commitdiff